美利体育登录入口官网

普通剪刀

SCISSORS, GENERAL (Potts Smith design)

钼在马氏体不锈钢中对H2S-CO2环境中钝化膜的影响

Alloying Effect of Mo in Martensitic Stainless Steel on Passive Film in H2S-CO2 Environment

环境辅助裂纹（SSC和SCC）行为研究

Study on the behavior of environmentally assisted cracking (SSC and SCC)

降低酸性气井管材 SSC 测试的保守性

REDUCTION OF CONSERVATISM IN SSC TESTING FOR SOUR GAS WELL TUBULARS

循环测试程序以开发沉淀硬化镍合金和马氏体不锈钢硬度转换

Cyclic test program to develop hardness transitions in precipitation hardened nickel alloys and martensitic stainless steels

不锈钢手册

Stainless Steel Brochure

高强度马氏体不锈钢板材、片材和带材标准规格

Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip

高强度马氏体不锈钢板 板材和带材的标准规格

Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip

高强度马氏体不锈钢板、薄板和带材的标准规范

Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip

马氏体不锈钢锻件和锻造件的高温服务标准规范

Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service

压缩机和涡轮机翼片用不锈钢棒材的标准规格

Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils

带纹理表面的焊接奥氏体、铁素体、马氏体和双相不锈钢锅炉、过热器、冷凝器和热交换器管的标准规范

Standard Specification for Welded Austenitic, Ferritic, Martensitic and Duplex Stainless Steel Boiler, Superheater, Condenser, and Heat Exchanger Tubes with Textured Surface(s)

结构用高强度铸钢件的标准规范

Standard Specification for Steel Castings, High Strength, for Structural Purposes

结构用高强度钢铸件标准规范

Standard Specification for Steel Castings, High Strength, for Structural Purposes

适用于高温设施的含压力部件钢铸件,马氏体不锈钢和合金钢的标准规范

Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

用于压力容器的钢铸件 马氏体不锈钢和合金标准规范 适用于高温服务

Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

通用无缝和焊接铁素体和马氏体不锈钢管标准规范

Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

汽轮机用重壁碳素钢、低合金钢和不锈钢铸钢件的标准规范

Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines

不锈钢锻件标准规范

Standard Specification for Stainless Steel Forgings

受压钢铸件的标准规格

Standard Specification for Steel Castings Suitable for Pressure Service

适用于压力服务的钢铸件标准规范

Standard Specification for Steel Castings Suitable for Pressure Service

适用于压力美利体育官网首页网址的钢铸件标准规范

Standard Specification for Steel Castings Suitable for Pressure Service

受压钢铸件的标准规范

Standard Specification for Steel Castings Suitable for Pressure Service

冷镦和冷锻不锈钢钢丝的标准规范

Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging

止血钳的一般工艺和性能测量标准规范

Standard Specification for General Workmanship and Performance Measurements of Hemostatic Forceps

不锈钢凹圆头帽螺钉的标准规范

Standard Specification for Stainless Steel Socket Head Cap Screws

不锈钢内六角螺钉的标准规格 (米制)

Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]

高温用马氏体不锈钢棒材标准规范

Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service

弹簧圆柱销钉.开槽,轻型(ISO 13337-2009)

Spring-type straight pins - Slotted, light duty(ISO 13337:2009)

带内螺纹的平行销，材质为淬硬钢或马氏体不锈钢

Parallel pins with internal thread, of hardened steel or martensitic stainless steel

弹簧型直销.卷制重型

Spring-type straight pins. Coiled, heavy duty

弹簧型直销.卷制轻型

Spring-type straight pins. Coiled, light duty

耐腐蚀不锈钢紧固件的机械性能.第2部分:螺母(ISO 3506-2-2009).德文版本EN ISO 3506-2-2009

Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009); German version EN ISO 3506-2:2009

淬硬钢和马氏体不锈钢制直销（定位销）

Parallel pins of hardened and martensitic stainless steel (Dowel pins) (ISO 8734:1997); German version EN ISO 8734:1997

平行销，硬化钢和马氏体不锈钢（定位销）（ISO 8734:1997）

Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins) (ISO 8734:1997)

淬硬钢和马氏体不锈钢制带内螺纹的等直径销

Parallel pins with internal thread, of hardened and martensitic stainless steel (ISO 8735:1997); German version EN ISO 8735:1997

弹簧式直销 卷制 轻型

Spring-type straight pins - Coiled, light duty (ISO 8751:2007); German version EN ISO 8751:2007

淬硬钢或马氏体不锈钢内螺纹圆柱销 ISO 8735-1997;代替EN 28735-1992

Parrallel Pins with Internal Thread, of Hardened Steel or Martensitic Stainless Steel ISO 8735:1997; Supersedes EN 28735:1992

不锈钢 牌号及化学成分

Stainless steels——Designation and chemical composition

紧固件机械性能 不锈钢自攻螺钉

Mechanical properties of fasteners.Stainless steel tapping screws

耐腐蚀不锈钢紧固件的机械性能. 第1部分. 螺栓, 螺钉和螺柱

Mechanical properties of corrosion-resistant stainless steel fasteners. Part 1. Bolts, screws and studs

牙科探针.技术要求和试验方法

Dental explorers. Technical requirements and test methods

一般用途的不锈钢 第3部分 电线

Stainless steels for general purpose. Part 3. Wire

弹簧型开口直销.轻型有槽

Spring-type straight pins - Slotted, light duty

牙科镊子 第1部分:一般要求

Dental tweezers - Part 1: General requirements

耐腐蚀不锈钢紧固件的机械性能.第2部分:螺母

Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts

耐腐蚀不锈钢紧固件的机械特性.第4部分:攻丝螺钉

Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws

与食品接触的材料和制品 刀具和凹形餐具 第1部分:准备食物用刀具的要求

Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 1: Requirements for cutlery for the preparation of food

淬硬钢和马氏体不锈钢(定位销)圆柱销

Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins)

淬硬钢和马氏体不锈钢内螺纹圆锥销

Parallel pins with internal thread, of hardened steel and martensitic stainless steel

紧固件 耐腐蚀不锈钢紧固件的机械性能 第5部分：高温用特殊紧固件（包括镍合金紧固件）

Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 5: Special fasteners (also including fasteners from nickel alloys) for high temperature applications

定位销(硬化平行销)

Dowel pins (Parallel pins, hardened)

内螺纹平行销

Parallel pins with internal thread

船用不锈钢螺旋桨补焊技术条件

Repair Welding Standard for Stainless Steel Propeller of Ships

压力容器用钢 第5部分 马氏体、奥氏体和铁素体 奥氏体不锈钢

Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels

材料耐硫化氢应力腐蚀开裂试验

Material resistance to hydrogen sulfide stress corrosion cracking test

高速多相条件下的冲蚀腐蚀及协同效应

Erosion Corrosion and Synergistic Effects under High Velocity Multiphase Conditions

13Cr4Ni阀在极端硫化物环境中的应用：为什么有效

Application of 13Cr4Ni valves in extreme sulfide environments: Why it works

大型混流式水轮机转轮马氏体不锈钢铸件技术条件

Technical conditions of martensitic stainless steel castings for large Francis turbine runner

大型水轮机电渣熔铸马氏体不锈钢导叶铸件技术条件

Technical conditions for large hydraulic turbine electroslag casting martensitic stainless steel guide vane castings

压水堆核电厂用不锈钢 第18部分：2、3 级辅助泵驱动轴用马氏体不锈钢锻、轧件

Stainless steel for pressurized water reactor nuclear power plants.Part 18: Rolled or forged martensitic stainless steel parts for class 2 and 3 auxiliary pump drive shafts

压水堆核电厂用不锈钢.第20部分:泵用马氏体不锈钢 A、B、C 类非承压铸造 内件

Stainless steel for pressurized water reactor power plant.Part 20: Martensitic stainless steel for non-pressure-retaining internal category A,B and C parts of pumps

插头，扩展 CRES，416 或 416SE，短；标准和 .010 超大直径，UNS S41600/UNS S41623

PLUG, EXPANSION - CRES, 416 OR 416SE, SHORT; STD AND .010 OVERSIZE DIAMETERS, UNS S41600/UNS S41623

引脚，扩展 CRES，416 或 416SE，短路，UNS S41600/UNS S41623

PIN, EXPANSION - CRES, 416 OR 416SE, SHORT, UNS S41600/UNS S41623

销 开口 CRES AMS 7211 公制系列

PIN@ COTTER - CRES@ UNS S32100@ AS7211 METRIC SERIES

不锈钢 SS钢 23 03

Stainless steel - SS steel 23 03

牙科镊子 第1部分：通用要求（ISO 15098-1:1999）

Dental tweezers - Part 1: General requirements (ISO 15098-1:1999)

耐腐蚀不锈钢紧固件的机械性能 第2部分：螺母（ISO 3506-2:1997）

Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 2: Nuts (ISO 3506-2:1997)

耐腐蚀不锈钢紧固件的机械性能 第4部分：攻丝螺钉（ISO 3506-4:2009）

Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009)

弹簧直 pin 螺旋形 标准用途（ISO 8750:2007）

Spring-type straight pins - Coiled, standard duty (ISO 8750:2007)

硬质钢或马氏体不锈钢制成的带内螺纹的圆柱销 （ISO 8735:1997）

PARALLEL PINS WITH INTERNAL THREAD, OF HARDENED STEEL OR MARTENSITIC STAINLESS STEEL. (ISO 8735:1997).

弹簧型直销 卷绕，重型（ISO 8748:2007）

Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007)

马氏体不锈钢中δ铁素体含量金相测定法

Micrographic method for determining content of δ-ferrite in martensitic stainless steel