美利体育登录入口官网

金属材料 力学试验 术语

Metallic materials. Mechanical testing. Vocabulary.

管道裂纹评估和管理的推荐规程（第一版）

Recommended Practice for Assessment and Management of Cracking in Pipelines (FIRST EDITION)

管道裂纹评估与管理推荐做法

API Recommended Practice 1176

给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Methods of test for metallic and related coatings - Corrosion and related property tests - Cracks and pores in chromium

绕组线．漆包圆铜绕组线

Winding wires - Enamelled round copper winding wires

绕组线．漆包圆铝绕组线

Winding wires - Enamelled round aluminium winding wires

铜和铜合金带材可成型性测定用弯曲试验的标准试验方法

Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip

环境温度下高级陶瓷抗弯强度标准试验方法.圆柱杆强度

Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature-Cylindrical Rod Strength

室温下高级陶瓷抗弯强度标准试验方法.圆柱杆强度

Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperaturemdash;Cylindrical Rod Strength

使用压缩和拉伸模量之差来确定密封胶中裂纹程度的标准实践

Standard Practice for Determining the Extent of Cracking in a Sealant using the Difference between the Compressive and Tensile Modulus

臭氧控制环境中橡胶劣化破裂的标准试验方法

Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment

断裂韧性测量的标准试验方法

Standard Test Method for Measurement of Fracture Toughness

英制和米制系列螺栓, 螺钉和螺柱表面不连续性的标准规范

Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series

螺母 普通螺母或开槽螺母（齿形） 采购规范

Nuts, plain or slotted (castellated). Procurement specification

焊接和相关程序.缺陷的名称与符号系统

Welding and allied processes - Designation system for imperfections

民用爆炸物.推进剂和火箭推进剂.气孔和裂缝的测定

Explosives for civil uses - Propellants and rocket propellants - Determination of voids and fissures

航空航天系列 套筒 管状 凸头 耐腐蚀钢 钝化处理

Aerospace series?— Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)

航空航天系列.紧公差TI-P64001钛合金制阳极电镀或铝质有色覆层100°正常或沉头紧固/凹头锁紧螺栓.TI-P99002型钛合金或铝合金2024的紧固件.米制系列.技术规范

Aerospace series - Lockbolts, 100 ° countersunk normal head or protruding head, tension-/ sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 - Metri

航空航天系列.带钝化(壁厚为0.25mm)耐腐蚀钢制埋头拉伸螺钉用管形套管

Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness)

紧固件 — 表面不连续性 — 螺母

Fasteners — Surface discontinuities — Nuts

在涂覆油漆和相关产品之前准备钢基材 金属喷砂清理磨料的规范 低碳铸钢丸

Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Low-carbon cast-steel shot

皮革 表面膨胀率和强度的测定（球破裂法）

Leather. Determination of distension and strength of surface (Ball burst method)

焊接 钢、镍、钛及其合金的熔焊接头（束焊除外） 缺陷质量等级

Welding. Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded). Quality levels for imperfections

焊接和相关工艺.金属材料中几何缺陷的分类.熔焊

Welding and allied processes. Classification of geometric imperfections in metallic materials. Fusion welding

橡胶 硫化或热塑性塑料 挠曲裂纹和裂纹扩展的测定(De Mattia)

Rubber, vulcanized or thermoplastic. Determination of flex cracking and crack growth (De Mattia)

硫化橡胶或热塑性橡胶 耐臭氧开裂性 静态和动态应变测试

Rubber, vulcanized or thermoplastic. Resistance to ozone cracking - Static and dynamic strain testing

滚动轴承 陶瓷滚动体 表面缺陷的术语和特性

Rolling bearings. Ceramic rolling elements. Terms and characteristics of surface imperfections

危险货物运输用桶的再制造、修复和重新加工

Remanufacturing, repair and reprocessing of dangerous goods transport drums

危险货物运输用桶的再制造、修复和重新加工

Remanufacturing, repair and reprocessing of dangerous goods transport drums

皮革 膨胀度和表面强度的测定（球破裂法）

Leather – Determination of distension and strength of surface (ball burst method)

滚动轴承 陶瓷滚动体 表面缺陷的术语和特性

Rolling bearings – Ceramic rolling elements – Terms and characteristics of surface imperfections

太阳能级多晶硅锭

Solar Grade Polysilicon Ingot

公路桥梁钢箱梁疲劳裂纹美利体育登录入口官网、评定与维护规范

Specifications for detection, evaluation and maintenance of fatigue cracks in steel box girders of highway bridges

铁路车辆的状况 制动器 第3部分：通风式轴装盘式制动器

State of railway vehicles - Brake - Part 3: Ventilated axle mounted brake discs

铁路车辆状况 制动器 第3部分：通风轴装制动盘

State of railway vehicles - Brake - Part 3: Ventilated axle mounted brake discs / Note: DIN 27205-3 (2010-11) remains valid alongside this standard until 2017-09-30.

铁路车辆的状况 制动器 第4部分：无通风式轴装盘式制动器

State of railway vehicles - Brake - Part 4: Non ventilated axle mounted brake discs

塑料焊接接头中缺陷的分类、术语和解释

Classification, terminology and interpretation of defects in plastic welded joints

木材强度分级 第5部分：锯材硬木

Strength grading of wood - Part 5: Sawn hard wood

釉和搪瓷.缺陷的表达和描述.第2部分:薄膜涂层

Vitreous and porcelain enamels - Presentation and characterization of defects - Part 2: Thin-film coats

油漆和清漆 用高电压对油漆涂层和类似涂层进行气孔和裂纹试验方法

Paints and varnishes - Method for testing paint coatings for pores and cracks using high-voltage

油漆和清漆.用高电压对油漆涂层和类似涂层进行气孔和裂纹试验方法

Paints and varnishes - Method for testing paint coatings for pores and cracks using high-voltage

清漆和涂料.外部砖石和混凝土用涂层材料和涂层系统.第7部分:裂缝遮避性能的测定

Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties; German version EN 1062-7:2004

油漆和清漆 外墙砖石和混凝土用涂料和涂料系统 第7部分：裂纹桥接性能的测定

Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties; German version EN 1062-7:2004

民用炸药.推进剂和火箭推进剂.第5部分:孔隙率和裂缝的测定

Explosives for civil uses - Propellants and rocket propellants - Part 5: Determination of voids and fissures; German version EN 13938-5:2004

运动场表面 抗冲击性的测定

Surfaces for sports areas - Determination of resistance to impact

运动区域表面 抗冲击性的测定

Surfaces for sports areas - Determination of resistance to impact; German version EN 1517:2020

紧固件.表面缺陷.符合一般要求的螺栓、螺钉和螺柱(ISO 6157-1-88)

Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991

航空航天系列 管状套筒 用于带平头的张力螺钉 采用耐腐蚀钢制成 已钝化（0.50 毫米壁厚）

Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness); German and English version EN 4306:2005

半导体器件.机械和气候试验方法.第35部分:塑封电子器件的声学显微美利体育登录入口官网方法

Semiconductor devices - Mechanical and climatic test methods - Part 35: Acoustic microscopy for plastic encapsulated electronic components (IEC 60749-35:2006); German version EN 60749-35:2006

半导体器件-机械和气候测试方法-第35部分：塑料封装电子元件的声学显微镜

Semiconductor devices - Mechanical and climatic test methods - Part 35: Acoustic microscopy for plastic encapsulated electronic components (IEC 60749-35:2006); German version EN 60749-35:2006

先进技术陶瓷 室温下整体陶瓷的机械性能 第6部分：断口研究指南

Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 6: Guidance for fractographic investigation; German version EN 843-6:2009

冰球运动中使用的防护装备 第4部分：守门员的头部和面部防护

Protective equipment for use in ice hockey - Part 4: Head and face protection for goalkeepers (ISO/DIS 10256-4:2021); German and English version prEN ISO 10256-4:2021 / Note: Date of issue 2021-11-12*Intended as replacement for DIN EN ISO 10256-4 (2018...

橡胶和塑料软管 - 动态条件下的耐臭氧性评估（ISO 10960:2017）

Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:2017); German version EN ISO 10960:2018

鞋类 耐开裂增长 腰带弯曲法（草案）

Crack-resistant growth belt bending method for footwear (draft)

不定形（不定形）耐火制品 第7部分：预成型件的测试

Monolithic (unshaped) refractory products - Part 7: Tests on pre-formed shapes (ISO 1927-7:2012); German version EN ISO 1927-7:2012

铝和铝合金的阳极氧化.阳极氧化涂层变形裂解耐受性评定(ISO 3211-2010).德文版本EN ISO 3211-2010

Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2010); German version EN ISO 3211:2010

皮革 表面膨胀和强度的测定（球爆法）（ISO/DIS 3379:2023）

Leather - Determination of distension and strength of surface (Ball burst method) (ISO/DIS 3379:2023); German and English version prEN ISO 3379:2023 / Note: Date of issue 2023-12-01*Intended as replacement for DIN EN ISO 3379 (2015-12).

皮革 表面膨胀和强度的测定（球 Burst 方法）(ISO 3379:2024); 德文版本 EN ISO 3379:2024

Leather - Determination of distension and strength of surface (ball burst method) (ISO 3379:2024); German version EN ISO 3379:2024

皮革 表面膨胀和强度的测定（球爆破法）（ISO 3379:2024）

Leather - Determination of distension and strength of surface (ball burst method) (ISO 3379:2024); German version EN ISO 3379:2024

色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第4部分:裂纹等级的评定(ISO 4628-4-2016).德文版本EN ISO 4628-4-2016

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016); German version EN ISO 4628-4:2016

焊接 - 钢、镍、钛及其合金的熔焊接头（不包括束焊） - 缺陷质量水平（ISO 5817:2023）

Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2023); German version EN ISO 5817:2023

紧固件.表面缺陷.第2部分:螺母

Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995); German version EN ISO 6157-2:2004

紧固件 表面不连续性 第2部分：螺母

Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995); German version EN ISO 6157-2:2004

焊接及相关工艺 金属材料几何缺陷分类 第一部分: 熔焊 (ISO 6520-1:2007)

Welding and allied processes - Classification of geometrical imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007)

焊接和相关工艺金属材料几何缺陷的分类 第1部分：熔焊

Welding and allied processes – Classification of geometric imperfections in metallic materials – Part 1: Fusion welding

焊接及相关工艺.金属材料几何缺陷分类.第1部分:氧炔焊

Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007); Trilingual version EN ISO 6520-1:2007

焊接和相关工艺 金属材料几何缺陷的分类 第1部分：熔焊

Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007); Trilingual version EN ISO 6520-1:2007

硫化橡胶或热塑性橡胶 挠曲开裂和裂纹扩展的测定(德墨西亚式)

Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia)

破坏性检查之外的热喷涂层内部特征美利体育登录入口官网

Internal feature detection of thermal spray coatings other than destructive testing

热喷涂层无损美利体育登录入口官网 内部特征美利体育登录入口官网

Nondestructive testing of thermal spray coatings Internal feature detection

外观和机械检查多层陶瓷片式电容器

VISUAL AND MECHANICAL INSPECTION MULTILAYER CERAMIC CHIP CAPACITORS

铜焊.铜焊接头的缺陷ISO 18279-2003

Brazing - Imperfections in brazed joints ISO 18279:2003

原木缺陷

Defects in logs

铜钨电触头缺陷美利体育登录入口官网方法

Test method of flaws of Cu-W contact

建筑防水卷材试验方法 第3部分：高分子防水卷材 外观

Test method for buiding sheets for waterproofing Part 3: Plastic and rubber sheets for waterproofing-visible defects

模制注射剂瓶

Injection vials made of moulded glass

盥洗室用固体皂.一般技术条件

Hard toilet soap. General specifications

日用固体皂 一般技术条件

Hard laundry soap. General specifications

液压绝缘弹性沥青基材料和屋顶.低温下弹性的测定方法

Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of flexibility at low temperature

橡胶或塑料涂层织物 低温弯曲试验

Rubber- or plastics-coated fabrics. Low-temperature bend test

站立射击和体育运动用枪靶.通用规范

Targets for stand shooting and sporting. General specifications

铜锌合金条.规范

Tombac strips. Specifications

核电站美利体育官网首页网址和管道强度的论证 结构材料抗裂特性的测定方法

Rules for strength assessment of equipment and pipelines of nuclear power installations. Methods for determination of fracture toughness characteristics of structural materials

焊接及相关工艺. 金属材料几何缺陷分类. 第1部分. 熔焊

Welding and allied process. Classification of geometric imperfections in metallic materials. Part 1. Fusion welding

化工美利体育官网首页网址塔用轻瓷填料

Light ceramic packing for chemical equipment towers

化工美利体育官网首页网址塔用支撑条梁

Supporting beam section for chemical equipment towers

胶粘剂.结构胶粘组件耐久性表征.楔形断裂试验

Adhesives - Characterization of durability of structural-adhesive-bonded assemblies - Wedge rupture test

航空航天 飞机结构用不锈钢自润滑球面滑动轴承 第3部分:技术规范

Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 3: Technical specification

塑料.断裂韧性的测定G<上标IC>)和K<上标IC>.线弹性断裂力学法

Plastics - Determination of fracture toughness (GIC and KIC) - Linear elastic fracture mechanics (LEFM) approach

塑料. 拉伸-拉伸疲劳断裂延伸性的测定. 线性弹力断裂机械(LEFM)方法

Plastics - Determination of tension-tension fatigue crack propagation - Linear elastic fracture mechanics (LEFM) approach

焊接.氧气火焰切割、激光束切割和等离子体切割的缺陷

Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology

整体(粗制)耐火材料产品.第7部分:预成型试验

Monolithic (unshaped) refractory products - Part 7: Tests on pre-formed shapes

核燃料技术. (U,Pu)O2烧结芯块. 微观结构检验的陶瓷相准备指南

Nuclear fuel technology - Sintered (U,Pu)O2 pellets - Guidance for ceramographic preparation for microstructure examination

焊接和相关工艺.金属材料中几何缺陷的分类.第1部分:熔焊

Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding

航空航天 铝或铝合金实心铆钉 采购规范

Aerospace - Rivets, solid, in aluminium or aluminium alloys - Procurement specification

石材砂锯用合金钢砂

Alloy steel grit for stone gang saw

港口起重机金属结构裂纹美利体育登录入口官网与维修规范

Specifications for crack detection and maintenance of metal structures of port cranes

紧固件 表面不平整度 第3部分：螺栓、螺钉和螺柱 特殊要求（ISO 6157-3:1988）

Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements (ISO 6157-3:1988)

航空系列 套管 管状 凸头 耐腐蚀钢 钝化处理（壁厚 0,25 毫米）

Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)

航空航天系列 37°球面管接头 高达 21 000 kPa 英寸系列 技术规范

Aerospace series - Pipe coupling 37°, spherical up to 21 000 kPa - Inch series - Technical specification

先进陶瓷 单块陶瓷室温机械性能 第6部分：断口分析指南

Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 6: Guidance for fractographic investigation

欧达 表面扩展与强度测定（压痕法）（ISO 3379:2024）

Leather - Determination of distension and strength of surface (Ball burst method) (ISO 3379:2024)

涂料和清漆 涂层的降解评价 缺陷数量和尺寸及外观均匀变化强度的标示 第4部分:开裂程度评定(ISO 4628-4:2016)

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016)

焊接 钢、镍、钛及其合金的熔焊接头（不包括光束焊接） 缺陷的质量等级

Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections

圆木和锯材.术语.第9部分:锯材特性术语

Round and sawn timber. Terminology. Part 9 : terms relating to features of sawn timber.

滚动轴承 陶瓷滚动体 表面缺陷的术语和特性

Rolling bearings - Ceramic rolling elements - Terms and characteristics of surface imperfections

皮革 膨胀度和表面强度的测定（球破裂法）

Leather - Determination of distension and strength of surface (Ball burst method)

焊接 - 钢、镍、钛及其合金的熔焊组件（束焊除外） - 与缺陷相关的质量水平

Welding - Assemblies in steel, nickel, titanium and their alloys welded by fusion (beam welding excluded) - Quality levels in relation to defects

硫化橡胶或热塑性橡胶 耐臭氧开裂 第1部分：静态和动态应变试验

Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 1 : static and dynamic strain testing

滚动轴承 陶瓷滚动体 表面缺陷的术语和特性

Rolling bearings - Ceramic rolling elements - Terms and characteristics of surface imperfections

硫化橡胶或热塑性橡胶 耐臭氧开裂 第1部分：静态和动态应变试验

Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 1 : static and dynamic strain testing

工业内窥镜操作使用方法与判定规则

Industrial endoscope operation method and judgment rules

声发射测试方法

Acoustic Emission Test Methods

航空航天系列 锁紧螺母 100级沉头普通头或凸头 拉力/剪切型 公差紧密 钛合金TI-P64001制造 阳极氧化或带有铝着色涂层 齿环采用钛合金TI-P99002或铝合金2024 Me...

Aerospace series - Lockbolts, 100 countersunk normal head or protruding head, tension- / sheartype, close tolerance, in titantium alloy TI-P64001, anodized or with aluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 - Me...

Aerospace系列 蘖管 管状件 用于平头紧定螺钉 腐蚀 resistant钢 经过钝化处理 (壁厚0.25mm)

Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness)

航空航天系列 用于平头张力螺钉的管状套管 耐腐蚀钢制成 钝化处理

Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness)

先进陶瓷 室温下整体陶瓷的机械性能 第6部分：断裂显微分析指导

Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 6: Guidance for fractographic investigation

焊接及相关过程 金属材料几何缺陷的分类 第1部分：熔焊（ISO 6520-1:2007）

Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007)

橡胶、硫化或热塑性橡胶 挠曲裂纹和裂纹扩展的测定（德马尔蒂亚方法）（等同采用ISO 132:2017）

Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia) (ISO 132:2017, IDT)

橡胶、硫化或热塑性 臭氧裂纹抵抗力 第1部分：静态和动态伸长率试验（ISO 1431-1:2024 等同）

Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing (ISO 1431-1:2024, IDT)

金属材料 机械试验 词汇表（ISO 23718:2007 等同）

Metallic materials - Mechanical testing - Vocabulary (ISO 23718:2007, IDT)

滚动轴承 陶瓷滚动体 表面缺陷的术语和特征（ISO 3643:2024 等同采用）

Rolling bearings — Ceramic rolling elements — Terms and characteristics of surface imperfections (ISO 3643:2024, IDT)

油气输送管特殊性能试验方法 第5部分：全尺寸断裂阻力试验

Test methods for special properties of oil and gas transmission pipes Part 5: Full-scale fracture resistance test

水下钢结构交流电磁场裂纹美利体育登录入口官网规程

Operating procedure for alternating current field measurement(ACFM) technique for underwater steel structure

受力件大气环境腐蚀试验

Atmospheric Environment Corrosion Test of Forced Parts

皮革 表面扩张度和强度的测定（球爆破法）（ISO 3379:2024）

Leather - Determination of distension and strength of surface (Ball burst method) (ISO 3379:2024)

焊接 钢、镍、钛及其合金的熔焊接头（不包括束焊） 缺陷质量水平（ISO 5817:2023）

Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2023)

焊接和相关工艺 金属材料几何缺陷的分类 第1部分：熔焊（ISO 6520-1:2007）

Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007)

金属材料 机械测试 词汇

Metallic materials. Mechanical testing. Vocabulary.

皮革 表面抗张强度的测定（球形法）

Leather - Determination of distension and strength of surface (Ball burst method)

增材制造工艺 使用激光束进行金属粉末床熔化 (PBF-LB/M) 错误目录 激光束熔化中的错误模式

Additive manufacturing processes Powder bed fusion of metal with laser beam (PBF-LB/M) Defect catalogue – Defect images during laser beam melting