剥落指涂层或表面材料以片状形式从基底或下层脱落的缺陷现象,可能由于应力过大、附着力不足、冻融循环或刀刃磨损引起,导致暴露下层,影响外观和耐久性,常见于油漆、陶瓷涂层、混凝土等表面。
| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| ACI 546.1R-1980(1997) 指南标准 |
Guide for Repair of Concrete Bridge Superstructures
分层 混凝土桥面 |
1997 美国混凝土学会 |
| AS/NZS 1580.481.1.10:1998(R2013) |
Paints and related materials - Methods of test - Coatings - Exposed to weathering - Degree of flaking and peeling
|
2013 澳大利亚/新西兰标准 |
| ASTM C703-72(2021) 试验标准 |
Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum
搪瓷涂层 铝和铝合金 |
2021 美国材料与试验协会 |
| ASTM D772-24 试验 |
Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints
涂膜 |
2024-06-05 美国材料与试验协会 |
| BS EN 14297:2004 试验 |
Chimneys - Freeze-thaw resistance test method for chimney products
冻融循环 |
2004-08-18 英国标准学会 |
| BS EN ISO 13805:2009 试验 |
Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)
瓷釉 |
2000-01-15 英国标准学会 |
| BS PD CEN/TS 12390-9:2016 试验标准 |
Testing hardened concrete. Freeze-thaw resistance with de-icing salts. Scaling
冻融循环 |
2016-12-31 英国标准学会 |
| DIN 51176-2:2008 分类 |
Vitreous and porcelain enamels - Presentation and characterization of defects - Part 2: Thin-film coats
搪瓷缺陷 裂纹 |
2008-06 德国标准化学会 |
| DIN CEN/TS 12390-9:2006 试验 |
Testing hardened concrete - Part 9: Freeze-thaw resistance - Scaling; German version CEN/TS 12390-9:2006
冻融循环 |
2006-08 德国标准化学会 |
| DIN EN 12390-9:2002 试验 |
硬化混凝土美利体育登录入口官网-第9部分: 抗冻融及剥离耐久性的试验 Testing hardened concrete — Part 9: Freeze-thaw resistance, Scaling
冻融循环 |
2002-06 德国标准化学会 |
| DIN EN ISO 13805:2009-04 试验 |
铝用搪瓷-电解溶液作用下铝上搪瓷附着力的测定(剥落试验)(ISO 13805:1999) Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test) (ISO 13805:1999); German version EN ISO 13805:2009
搪瓷涂层 试验溶液 |
2009-04 德国标准化学会 |
| DIN EN ISO 19496-2 E:2016-02 术语 |
Enamel and Glaze Terminology Part 2: Visual Representation and Description (Draft)
搪瓷 搪瓷缺陷 |
2016-02 德国标准化学会 |
| DIN EN ISO 19496-2:2017 术语 |
搪瓷和搪瓷 术语 第2部分:视觉表示和描述(ISO 19496-2:2017) Vitreous and porcelain enamels - Terminology - Part 2: Visual representations and descriptions (ISO 19496-2:2017)
搪瓷缺陷 |
2017-08-01 德国标准化学会 |
| IRAM 12566-1:2005 规范 |
Ladrillos y bloques cerámicos para la construcción de tabiques y muros. Parte 1: Macizos. Ceramic clay bricks and blocks for walls and partitions construction. Part 1: Solid.
|
2005-03-21 阿根廷标准化研究所 |
| JG/T 111-1999 规范 |
Cutting blade for reinforced steel bar shears
|
1999-06-04 行业标准-建筑工业 |
| JIS K 5600-8-5:1999 试验 |
涂料试验方法:第8部分:涂料层降解的评价.第5节:剥落程度标识 Testing methods for paints -- Part 8: Evaluation of degradation of paint coatings -- Section 5: Designation of degree of flaking
油漆涂层 评级 |
1999-04-20 日本工业标准调查会 |
| LST EN ISO 19496-2:2017 术语 |
玻璃珐琅与瓷釉 术语 第2部分:图示与描述 (ISO 19496-2:2017) Vitreous and porcelain enamels - Terminology - Part 2: Visual representations and descriptions (ISO 19496-2:2017)
搪瓷缺陷 |
2017-07-31 立陶宛标准局 |
| SS 137244:1995 试验 |
Concrete testing - Hardened concrete - Scaling atfreezing
硬化混凝土 |
1995 瑞典标准研究所 |
| SS 137244:2005 试验 |
Concrete testing - Hardened concrete - Scaling at freezing
硬化混凝土 |
2005 瑞典标准研究所 |
| SS-EN ISO 4628-5:2016 试验 |
油漆和清漆 涂层退化的评估 缺陷数量和大小以及外观均匀变化强度的指定 第5部分:剥落程度的评估(ISO 4628-5:2016) Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016)
降解 |
2016 瑞典标准研究所 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号
页面更新时间: 2026-09-05 05:11