美利体育登录入口官网

航空发动机清洁材料对钛合金应力腐蚀的标准试验方法

Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials

环境辅助裂纹：风险评估和评价的预测方法

Environmentally Assisted Cracking: A Predictive Approach for Risk Assessment and Evaluation

ASTM 特殊技术出版物第 425 号

ASTM SPECIAL TECHNICAL PUBLICATION NO. 425

钛合金相关应用现象

Titanium alloy related application phenomena

新方法应对应力腐蚀

New approach to combat stress corrosion

铜和铜合金.易切削用棒材

Copper and copper alloys. Rod for free machining purposes

光纤 测量方法和测试程序 应力腐蚀敏感性

Optical fibres. Measurement methods and test procedures - Stress corrosion susceptibility

金属和合金的腐蚀.应力腐蚀试验.第1部分:试验程序的通用指南

Corrosion of metals and alloys. Stress corrosion testing. General guidance on testing procedures

金属和合金的腐蚀 应力腐蚀试验 第2部分：弯梁试样的制备和使用

Corrosion of metals and alloys — Stress corrosion testing — Part 2 : Preparation and use of bent - beam specimens

金属和合金的腐蚀 应力腐蚀试验 第3部分：U形弯试样的制备和使用

Corrosion of metals and alloys — Stress corrosion testing — Part 3 : Preparation and use of U - bend specimens

金属和合金的腐蚀 应力腐蚀试验 第4部分：单轴加载拉伸试样的制备和使用

Corrosion of metals and alloys — Stress corrosion testing — Part 4 : Preparation and use of uniaxially loaded tension specimens

铜和铜合金 热交换器用轧制、翅片、无缝管

Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers; German version EN 12452:2012

航空航天.航天产品保证.控制应力腐蚀裂纹材料的选择

Aerospace - Space product assurance - Material selection for controlling stress-corrosion cracking; German and English version EN 14101:2001

航天工程.机械.第8部分:材料

Space engineering - Mechanical - Part 8: Materials; English version EN 14607-8:2004

航天产品保证 控制应力腐蚀裂纹材料的选择（草案）

Space product assurance - Material selection for controlling stress-corrosion cracking

航天产品保证.控制应力腐蚀裂纹材料的选择;英文版本EN 16602-70-36-2014

Space product assurance - Material selection for controlling stress-corrosion cracking; English version EN 16602-70-36:2014

航天产品保证 控制应力腐蚀裂纹的材料选择

Space product assurance - Material selection for controlling stress-corrosion cracking; English version EN 16602-70-36:2014

金属和合金的腐蚀 应力腐蚀测试 第10部分：反向 U 形弯曲法

Corrosion of metals and alloys - Stress corrosion testing - Part 10: Reverse U-bend method (ISO 7539-10:2020); German version EN ISO 7539-10:2020

金属和合金的腐蚀.应力腐蚀试验.第2部分:弯曲梁试样的制备和使用(ISO 7539-2-1989)

Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 2: Preparation and Use of Bent-Beam Specimen (ISO 7539-2: 1989)

金属与合金的腐蚀.应力腐蚀试验.第4部分:轴向载荷拉伸试样的制备和使用(ISO 7539-4: 1989)

Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 4: Preparation and Use of Uniaxially Loaded Tension Specimens (ISO 7539-4: 1989)

金属和合金的腐蚀 应力腐蚀试验 第5部分;C型环试样的制备和应用

Corrosion of metals and alloy--Stress corrosion testing--Part 5: Preparation and use of C-ring specimens

金属和合金的腐蚀 应力腐蚀室外暴露试验方法

Corrosion of metals and alloys-Test methods for stress corrosion cracking in outdoor envionments

7XXX系铝合金应力腐蚀试验 沸腾氯化钠溶液法

Test methods for stress corrosion of 7XXX series aluminium alloys—Boiling sodium chloride solution method

腐蚀和老化防护的统一系统.金属和合金.U型弯曲试样应力腐蚀试验的一般要求

Unified system of corrosion and ageing protection. Metals and alloys. General requirements for U-bend specimens of stress corrosion testing

高压应力下户外用聚合材料的选择指南

Selection guidelines for polymeric materials for outdoor use under HV stress

金属和合金的腐蚀 - 测量环境友好的小裂纹扩展速率

Corrosion of metals and alloys — Measurement of environmentally assisted small crack growth rate

金属和合金的腐蚀.应力腐蚀试验.第2部分:弯梁试样的制备和使用

Corrosion of metals and alloys - Stress corrosion testing - Part 2: Preparation and use of bent-beam specimens

金属和合金的腐蚀-应力腐蚀试验-第8部分：焊件评价用试样的制备和使用

Corrosion of metals and alloys - Stress corrosion testing - Part 8: Preparation and use of specimens to evaluate weldments

铝合金的耐腐蚀性.抗应力腐蚀裂纹的测定

Test methods for determination of resistance to stress corrosion cracking of aluminum alloys

根因分析：美国东北部30英寸预应力混凝土管破裂的原因

Root Cause Analysis: Causes of 30-inch prestressed concrete pipe rupture in the northeastern United States

预应力钢.蒸馏水中应力腐蚀试验

Prestressing steels - Stress corrosion test in distilled water

金属和合金的腐蚀 应力腐蚀试验 第4部分：单轴载荷拉伸试样的制备和使用

Corrosion of metals and alloys. Stress corrosion testing. Part 4 : preparation and use of uniaxially loaded tension specimens.

铜锌合金管件、阀门及配件的品质保证

Quality and Inspection Requirements for Copper-Zinc Alloy Components for Gas and Potable Water Installations

飞行器涡轮发动机元部件用碱性水基清洗剂化合物

Compound, Alkaline Aqueous Cleaner Aircraft Turbine Engine Components

复合碱性水性清洁剂飞机涡轮发动机部件

Compound, Alkaline Aqueous Cleaner Aircraft Turbine Engine Components

铝合金挤压件 7.7Zn 2.4Mg 1.6Cu 0.16Cr（7049-T73511）固溶热处理 应力消除 和过时效（UNS A97049）

Aluminum Alloy Extrusions 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T73511) Solution Heat Treated@ Stress Relieved@ and Overaged (UNS A97049)

铝合金板 5.7Zn 2.2Mg 1.6Cu 0.22Cr（7475-T7351）固溶热处理 拉伸消除应力 和沉淀热处理（UNS A97475）

Aluminum Alloy Plate 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T7351) Solution Heat Treated@ Stress Relieved by Stretching@ and Precipitation Heat Treated (UNS A97475)

铝合金 手工锻造 7.7Zn 2.4Mg 1.6Cu 0.16Cr (7049-T7352) 固溶热处理、压缩应力消除和沉淀热处理

Aluminum Alloy, Hand Forgings 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T7352) Solution Heat Treated, Stress Relieved by Compression, and Precipitation Heat Treated

铝合金 轧制或锻造环 成分：5.6Zn 2.5Mg 1.6Cu 0.23Cr（7075-T7351 7075-T7352） 固溶热处理 机械应力消除 以及析出热处理

Aluminum Alloy, Rolled or Forged Rings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351, 7075-T7352), Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated

超高强度钢和冲压件的酸浸氢脆测试

Hydrogen Embrittlement Testing of Ultra High Strength Steels and Stampings by Acid Immersion

锻造铜合金 SS-黄铜 51 68 CuZn40Pb2

Wrought copper alloy - SS-brass 51 68 - CuZn40Pb2

铜及铜合金 铸造件

Copper and copper alloys — Forgings

金属和合金的腐蚀 应力腐蚀试验 第1部分：试验程序的一般指导（ISO 7539-1:2012）

Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures (ISO 7539-1:2012)

金属和合金的腐蚀 应力腐蚀试验 第6部分：恒定载荷或恒定位移试验用预裂纹试样的制备和使用（ISO 7539-6:2011）

Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement (ISO 7539-6:2011)

金属和合金的腐蚀 应力腐蚀试验 第6部分：在恒定载荷或恒定位移条件下测试的预裂试样制备与使用（ISO 7539-6:2018）

Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement (ISO 7539-6:2018)

受力件大气环境腐蚀试验

Atmospheric Environment Corrosion Test of Forced Parts

低合金结构钢实验室腐蚀试验 第13部分：低合金结构钢应力腐蚀试验方法

Laboratory Corrosion Testing of Low Alloy Structural Steels Part 13: Stress Corrosion Test Methods for Low Alloy Structural Steels

油管和套管全尺寸应力腐蚀试验方法

Test method of full-scale stress corrosion experiment for tubing and casing

航天产品保证 控制应力腐蚀裂纹的材料选择

Space product assurance - Material selection for controlling stress-corrosion cracking (Endorsed by AENOR in December of 2014.)

金属和合金的腐蚀 应力腐蚀测试 第1部分：测试程序的一般指南（ISO 7539-1:2012）

Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures (ISO 7539-1:2012)

金属和合金的腐蚀 应力腐蚀测试 第3部分：U 型弯试样的制备和使用 （ISO 7539-3:1989）

CORROSION OF METALS AND ALLOYS. STRESS CORROSION TESTING. PART 3: PREPARATION AND USE OF U-BEND SPECIMENS. (ISO 7539-3:1989).

金属和合金的腐蚀 应力腐蚀测试 第4部分：单轴加载拉伸试样的制备和使用（ISO 7539-4:1989）

CORROSION OF METALS AND ALLOYS. STRESS CORROSION TESTING. PART 4: PREPARATION AND USE OF UNIAXIALLY LOADED TENSION SPECIMENS. (ISO 7539-4:1989)

金属和合金的腐蚀-应力腐蚀试验-第7部分：慢应变率试验（ISO 7539-7:2005）

Corrosion of metals and alloys- Stress corrosion testing-Part 7:Slow strain rate testing (ISO 7539-7:2005)

铁-铬-镍合金在高温水中应力腐蚀试验方法

Test method for stress corrosion of iron-chromium-nickel alloy in high temperature water

不锈钢在沸腾氯化镁溶液中应力腐蚀试验方法

Test method for stress corrosion of stainless steel in boiling magnesium chloride solution