美利体育登录入口官网

不锈钢在硫酸环境中的腐蚀：氯化物含量和温度的影响

Corrosion of stainless steels in sulfuric acid environments: influence of chloride content and temperature

草酸盐钝化方法的精炼与传统硝酸基化学物质的比较

Refinement of the oxalate passivation method compared to conventional nitric acid-based chemistries

锌合金热扩散涂层（TDC）钢紧固件 硬件和其他产品的标准规范

Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products

不锈钢零件、美利体育官网首页网址及系统的清洗和除垢的标准操作规程

Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems

不锈钢零件, 美利体育官网首页网址及系统的清洗, 除垢及钝化的标准实施规程

Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems

用电抛光法测定不锈钢钝化的标准规范

Standard Specification for Passivation of Stainless Steels Using Electropolishing

用电抛光法测定不锈钢钝化的标准规范

Standard Specification for Passivation of Stainless Steels Using Electropolishing

使用电抛光钝化不锈钢的标准规范

Standard Specification for Passivation of Stainless Steels Using Electropolishing

美利体育登录入口官网锌和锌/铝合金镀层钢上六价铬的标准实施规程

Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel

不锈钢手术器械护理和处理标准指南

Standard Guide for Care and Handling of Stainless Steel Surgical Instruments

不锈钢手术器械护理和处理标准指南

Standard Guide for Care and Handling of Stainless Steel Surgical Instruments

钢制开口销规范 EN 2573

Specification for Split pins in steel EN 2573

航空航天系列.耐热钢钝化的标准对边,标准高度,平纹六角螺母.分类:1100 MPa/650℃

Aerospace series - Nuts, hexagonal, plain, normal height, normal across flats, heat resisting steel passivated - Classification: 1100 MPa/650 °C

航空航天系列 套筒 管状 凸头 耐腐蚀钢 钝化处理

Aerospace series?— Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)

金属和其他无机涂层 电解抛光作为不锈钢的平滑和钝化手段

Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel

金属和其他无机涂料 电解抛光作为不锈钢的平滑和钝化手段

Metallic and other inorganic coatings. Electropolishing as a means of smoothing and passivating stainless steel

耐腐蚀不锈钢紧固件的钝化

Passivation of corrosion-resistant stainless-steel fasteners

空间系统. 无人航天器破裂的预防

Space systems. Prevention of break-up of unmanned spacecraft

航天系统. 轨道发射阶段的处置工作

Space systems. Disposal of orbital launch stages

钢管、铜管、铝管的化学清洗

Chemical cleaning of steel pipes, copper pipes and aluminum pipes

金属和其他无机涂层 电解抛光作为平滑和钝化不锈钢的一种方法

Metallic and other inorganic coatings – Electropolishing as a means of smoothing and passivating stainless steel

有色金属的无铬 (VI) 钝化 - 第 2 部分：铝和铝合金

Chromium(VI) free passivation of non-ferrous metals - Part 2: Aluminium and aluminium alloys

金属镀层.附加无铬Cr(VI)处理的铁或钢表面锌和锌合金静电镀层

Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment

航空航天系列-耐腐蚀钢的钝化和镍基或钴基合金的净化（草案）

Aerospace series - Passivation of corrosion resisting steels and decontamination of nickel or cobalt base alloys

航空航天系列.耐蚀钢钝化和镍合金净化

Aerospace series - Passivation of corrosion resistant steels and decontamination of nickel base alloys; German version EN 2516:1997

航空航天系列.钝化耐蚀钢锁紧垫圈

Aerospace series - Washers, wire locking, in corrosion resisting steel - passivated; German version EN 2949:1996

航空航天系列 套管，管状，突出头部，耐腐蚀钢，钝化（0.25 毫米壁厚）

Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness); German and English version EN 3278:2019

航空航天系列 套管 管状 凸头 耐腐蚀钢制成 钝化（壁厚 0.25 毫米）

Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness); German and English version EN 3278:2019

航空航天系列.钝化防腐蚀钢制带埋头拉紧螺钉用套筒(0.50 mm 壁厚)

Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness); German and English version EN 4306:2005

航空航天系列 螺栓 大双六角头 紧公差普通柄 中等长度螺纹 耐热镍基合金 钝化 带铝颜料涂层 分类：1550 MPa

Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating, Classification: 1 550 MPa (at ambient temperature)/315 °C; German ...

金属和其他无机涂层 电解抛光作为不锈钢的平滑和钝化手段（草案）

Electropolishing of metals and other inorganic coatings as a means of smoothing and passivating stainless steel (Draft)

金属和其他无机涂层 电解抛光作为平滑和钝化不锈钢的手段（ISO 15730:2000）

Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel (ISO 15730:2000)

金属和其他无机涂层 电解抛光作为不锈钢的平滑和钝化手段

Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel (ISO 15730:2000); German version EN ISO 15730:2016 / Note: To be replaced by DIN EN ISO 15730 (2023-02).

金属和其他无机涂层 电解抛光作为平滑和钝化不锈钢的方法（ISO/FDIS 15730:2022）

Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel (ISO/FDIS 15730:2022); German and English version prEN ISO 15730:2022

金属和其他无机涂层 电解抛光作为不锈钢的平滑和钝化手段

Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel (ISO/FDIS 15730:2022); German and English version prEN ISO 15730:2022 / Note: Date of issue 2023-01-13*Intended as replacement for DIN EN I...

金属和其他无机涂层 电解抛光作为不锈钢的平滑和钝化手段（ISO 15730:2023）；德文版 EN ISO 15730:2023

Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel (ISO 15730:2023); German version EN ISO 15730:2023

耐腐蚀不锈钢紧固件的钝化处理

Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003); German version EN ISO 16048:2003

金属和合金的腐蚀-电化学测试方法-进行恒电位和动电位极化测量的指南

Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005+Cor. 1:2006); German version EN ISO 17475:2008

金属和其他无机涂层 锌、镉、铝锌合金和锌铝合金上的铬酸盐转化涂层 测试方法

Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2021); German version EN ISO 3613:2021

压水堆核电厂一回路系统不锈钢管中频弯管技术条件

Specification for primary system stainless steel elbow bent with intermediate frequency heating procedure for pressurized water reactor nuclear power plants

航空航天系列.耐蚀钢的钝化和镍合金的净化

Aerospace series - Passivation of corrosion resisting steels and decontamination of nickel base alloys

金属涂料--电镀涂层的锌和锌合金与补充铁或钢无铬(VI)处理

Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment

金属及其他无机覆盖层 金属表面的清洗和准备 第1部分：钢铁及其合金

Metallic and other inorganic coatings—Cleaning and preparation of metal surfaces—Part 1: Ferrous metals and alloys

卫星在轨测控管理规程 第21部分：离轨管理

TT&C management regulations for on-orbit satellites.Part 21: Deorbit management

热电电站 热力美利体育官网首页网址 基于VTIAMIN氨基酸类试剂的水化学模式、清洁和防腐要求规范

Thermal power plants. Heat-power equipment. Water-chemical regime cleaning and conservation, based on an amine-containing reagent ?VTIAMIN?. Norms and requirements

金属和其他无机覆盖层 抛光作为精加工和钝化不锈钢的方法

Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel

金属和其他无机涂层.作为不锈钢平滑和钝化手段的电抛光

Metallic and other inorganic coatings — Electropolishing as a means of smoothing and passivating stainless steel

耐腐蚀不锈钢紧固件的钝化

Passivation of corrosion-resistant stainless-steel fasteners

空间系统. 无人航天器破裂的预防

Space systems - Prevention of break-up of unmanned spacecraft

耐腐蚀不锈钢紧固件的钝化处理

Passivation of corrosion-resistant stainless-steel fasteners

航空航天系列 双六角自锁螺母 带沉孔 耐热钢制 钝化处理 等级：1 100 MPa（室温）/ 650 °C

Aerospace series - Nuts, bihexagonal, self-locking, with counterbore, in heat resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature) / 650 °C

航空航天系列 润滑油嘴 轴向型 耐蚀钢制 钝化处理

Aerospace series - Nipples, lubricating, axial type, in corrosion resisting steel, passivated

金属和其他无机镀层 作为不锈钢光整和钝化手段的电抛光（ISO 15730:2023）

Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel (ISO 15730:2023)

用于氢过氧化物服务中的阀门标准

Valves for Use in Hydrogen Peroxide Service

过氧化氢用阀门

Valves for Use in Hydrogen Peroxide Service

局部二氧化碳腐蚀中钝化和阴极保护作用的角色

The role of passivation and cathodic protection in localized CO2 corrosion

磺酸功能化三乙基铵和吡啶鎓型溴斯酸性离子液体对低碳钢的腐蚀行为及抑制特性

Corrosion Behavior and Inhibition Characteristics of Sulfonic Acid Functionalized Triethylammonium and Pyridinium Bromine Acidic Ionic Liquids on Mild Steel

酸浓度和温度对不锈钢及镍基材料活性腐蚀速率的影响

Effects of acid concentration and temperature on active corrosion rates of stainless steel and nickel-based materials

金属和其他无机涂层 电解抛光作为平滑和钝化不锈钢的方法

Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel

金属和其他无机涂层 电解抛光作为平滑和钝化不锈钢的方法

Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel

锡锌合金镀层工艺规范

Process specification for tin-zinc alloy coating

空间碎片减缓要求

Requirements for space debris mitigation

镁合金的预处理和防腐蚀工艺

Magnesium Alloy, Processes for Pretreatment and Prevention of Corrosion on

耐腐蚀钢的钝化

Passivation of Corrosion Resistant Steels

耐腐蚀钢的钝化

Passivation of Corrosion Resistant Steels

不锈钢部件润湿表面的表面状况规范

SPECIFICATION FOR THE SURFACE CONDITION OF THE WETTED SURFACES OF STAINLESS STEEL COMPONENTS

螺旋电子能谱 (AES) 评估钝化 316L 不锈钢部件润湿表面氧化层的测试方法

TEST METHOD FOR AUGER ELECTRON SPECTROSCOPY (AES) EVALUATION OF OXIDE LAYER OF WETTED SURFACES OF PASSIVATED 316L STAINLESS STEEL COMPONENTS

不锈钢酸洗与钝化规范

Stainless steel pickling and passivation specification

包装用钢 用于接触食品、人类和动物消费的饮料和产品的扁平钢材产品 镀锡钢（马口铁）

Steel for packaging — Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption — Tin coated steel (tinplate)

航空航天系列耐腐蚀钢的钝化和镍基合金的去污

Aerospace series - Passivation of corrosion resisting steels and decontamination of nickel base alloys

航空航天系列 螺母 六角槽形/凸台形 普通高度 端面普通宽度 用耐热钢制造 经氧化皮去除处理 分类：1 100 MPa（常温下）/650摄氏度

Aerospace series - Nuts, hexagonal, slotted/castellated, normal height, normal accross flats, in heat resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature) / 650 degrees Celsius

Aerospace系列 六角对边自锁螺母 带沉头孔 采用耐热镍基合金制造 经过钝化处理 MoS2润滑 分类：1 550 MPa（常温）/ 315 °C

Aerospace series - Nuts, bihexagonal, self-locking, with counterbore, in heat resisting nickel base alloy, passivated, MoS2 lubricated - Classification: 1 550 MPa (at ambient temperature) / 315 °C

航天系列 袖管、管状件、凸出头部 采用耐腐蚀钢材料且经钝化处理（壁厚0.25mm）

Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)

航空航天系列 螺栓 大双六角头 紧密公差普通杆 中等长度螺纹 耐热镍基合金 钝化 分类：1 250 MPa（室温下）/650摄氏度

Aerospace series - Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1 250 MPa (at ambient temperature) /650 degrees C

航空航天系列 螺栓 MJ螺纹 耐热镍基合金NI-PH2601（Inconel 718）钝化 技术分类：1 550 MPa（室温下）/ 650摄氏度 技术规范

Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1 550 MPa (at ambient temperature) / 650 degrees C - Technical specification

Aerospace系列 拉伸强度≤1450MPa的钢材、铜合金、镍合金和铝合金的锌 镍（12%-16% Ni）电镀 用于零件和紧固件

Aerospace series - Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensile strength ≤ 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners

金属和其他无机涂层 使用电抛光作为使不锈钢光滑和钝化的手段（ISO 15730:2023）

Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel (ISO 15730:2023)

耐腐蚀不锈钢紧固件的钝化（ISO 16048:2003）

Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003)

锅炉化学清洗规则

Boiler Chemical Cleaning Regulation

航空航天系列 螺栓 大双六角头 紧公差普通柄 中等长度螺纹 耐热镍基合金 钝化 分类：1250 MPa（环境温度）/650°C

Aerospace series - Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1 250 MPa (at ambient temperature) /650 °C (Endorsed by AENOR in January of 2007.)

航空航天系列 螺钉 盘头 偏置十字形凹槽 螺纹头部 耐腐蚀钢 钝化 分类：490 MPa（环境温度）/425°C

Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated - Classification: 490 MPa (at ambient temperature) / 425 °C (Endorsed by AENOR in May of 2008.)

航空航天系列 用于零件和紧固件的指定抗拉强度 = 1450 MPa 的钢、铜合金、镍合金和铝合金的锌镍（12 %-16 % Ni）镀层

Aerospace series - Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensile strength = 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners

金属和其他无机涂层 电解抛光作为不锈钢的平滑和钝化手段（ISO 15730:2023）

Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel (ISO 15730:2023)

金属和其他无机涂层 电解抛光作为平滑和钝化不锈钢的方法

Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel