美利体育登录入口官网

金属及相关涂层的试验方法 局部厚度试验 横截面显微照相检验

Methods of test for metallic and related coatings - Local thickness tests - Micrographic examination of cross-sections

规格石材抗压强度的标准试验方法

Standard Test Method for Compressive Strength of Dimension Stone

塑料试样清洁推荐实践

Recommended Practice for Cleaning Plastic Specimens

测量支持塑料烛光燃烧的最低氧气浓度（氧指数）的标准试验方法

Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

沥青稳定土壤的试样的制备标准规程

Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils

金相实验室安全标准指南

Standard Guide on Metallographic Laboratory Safety

评估表面燃烧特性的木制品样品制备和安装的标准实施规程

Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics

评估表面燃烧特性的木制品样品制备和安装的标准实施规程

Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics

评估表面燃烧特性的木制品样品制备和安装的标准实施规程

Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics

标准样品制备和安装用于评估表面燃烧特性的标准实施规程

Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics

金相试样制备标准指南

Standard Guide for Preparation of Metallographic Specimens

金相标本制备标准指南

Standard Guide for Preparation of Metallographic Specimens

通过添加制造工艺制造的金属材料机械性能评估的标准指南

Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes

强无机酸腐蚀钢宏观检验指南

Guide to Macroscopic examination of steel by etching with strong mineral acids

塑料 含氟聚合物分散体以及模塑和挤出材料 测试样品的制备和性能测定

Plastics. Fluoropolymer dispersions and moulding and extrusion materials. Preparation of test specimens and determination of properties

塑料 聚甲基丙烯酸甲酯 (PMMA) 模塑和挤出材料 测试样品的制备和性能测定

Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Preparation of test specimens and determination of properties

塑料.使用无模工艺的热塑材料试样的制备.一般原则和试样的激光烧结

Plastics. Preparation of test specimens of thermoplastic materials using mouldless technologies. General principles, and laser sintering of test specimens

船用金属材料试样制备技术要求

Technical requirements for sample preparation of marine metal materials

阻燃防水卷材燃烧性能技术条件

Specifications for combustion performance of flame retardant and waterproof membranes

木材纤维形态测定方法

Determination of wood fiber morphology

陶瓷原材料和材料的检验.干燥时质量变化测定用和化学分析用试样制备

Testing of ceramic materials - Preparation of samples for the determination of change of mass during drying and for chemical analysis

塑料薄膜的测试 尺寸稳定性的测定

Testing of plastic films - Determination of dimensional stability

塑料 用于模塑和挤出的热塑性苯乙烯基弹性体 第2部分：测试样品的制备和性能测定

Plastics - Thermoplastic styrene-based elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties

塑料 用于热塑性加工的热塑性硫化橡胶(PP+EPDM)第2部分：测试样品的制备和性能测定

Plastics - Thermoplastic vulcanizates for thermoplastic processing (PP+EPDM) - Part 2: Preparation of test specimens and determination of properties

航空航天系列 铝及铝合金锻造产品、锻坯和锻件的宏观检验

Aerospace series - Macrographic examination of aluminium and aluminium alloy wrought products, forging stock and forgings; German and English version FprEN 2715:2018

钢铁.化合物样品取样和制备方法

Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996); German version EN ISO 14284:2002

塑料.聚乙烯(PE)模塑和挤塑材料.第2部分:试样的制备和特性的测定(ISO 17855-2-2016).德文版本EN ISO 17855-2-2016

Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016); German version EN ISO 17855-2:2016

塑料 夏比冲击性能的测定 第1部分：非仪表冲击试验

Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO/DIS 179-1:2022); German and English version prEN ISO 179-1:2022 / Note: Date of issue 2022-03-25*Intended as replacement for DIN EN ISO 179-1 (2010-11).

塑料 丙烯腈 丁二烯 苯乙烯（草案）

Plastics Acrylonitrile Butadiene Styrene (Draft)

塑料 砜类聚合物模塑和挤出材料 第2部分：试样的制备和性能测定（ISO 24025-2:2020）

Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24025-2:2020)

塑料 聚（甲基丙烯酸甲酯）（PMMA）成型和挤出材料 第2部分：试样的制备和性能测定（ISO 24026-2:2020）

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24026-2:2020)

钢铁和钢铁产品 机械测试样品和试件的位置和准备

Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017); German version EN ISO 377:2017

水电工程岩土化学分析试验规程

Specification for geochemical analysis and testing of hydropower engineering

地质矿产实验室测试质量管理规范 第2部分：岩石矿物分析试样制备

Geology and Minerals Laboratory Testing Quality Management Specification Part 2: Preparation of Rock and Mineral Analysis Samples

塑料.简支梁冲击性能的测定.第1部分:非仪器化冲击试验

Plastics.Determination of charpy impact properties.Part 1:Non-instrumented impact test

船舶漆耐盐水性的测定.盐水和热盐水浸泡法

Ship coatings.Determination of resistance to salt water.Salt water and hot salt water immersion method

硫化橡胶 与金属粘接拉伸剪切强度测定方法

Rubber, vulcanized.Method for determination of strength properties of adhesive to metal in shear by tension loading

船用金属材料电偶腐蚀试验方法

The method of galvanic corrosion test for metallic ship materials

变形铝及铝合金化学成分分析取样方法

Methods for sampling for analyzing the chemical composition of wrought aluminum and aluminum alloys

氟化镁化学分析方法.第1部分:试样的制备和贮存

Chemical analysis of magnesium fluoride.Part 1:Preparation and storage of test samples

氟化锂化学分析方法.第1部分:试样的制备和贮存

Chemical analysis methods of lithium fluoride.Part1:Preparation and storage of test samples

塑料.不饱和聚酯树脂(UP-R).第2部分:试样制备和性能测定

Plastics.Unsaturated-polyester resins(UP-R).Part 2:Preparation of test specimens and determination of properties

焊接材料熔敷金属化学分析试样制备方法

Preparation methods of deposited metal specimens for chemical analysis

橡胶 物理试验方法试样制备和调节通用程序

Rubber physical test methods - General procedures for specimen preparation and conditioning

电阻点焊、凸焊及缝焊接头的机械剥离试验方法

Test method of mechanized peel for resistance spot, projection and seam welds

塑料 模塑和挤出用热塑性聚氨酯 第2部分：试样制备和性能测定

Thermoplastic polyurethanes for plastic molding and extrusion Part 2: Specimen preparation and property determination

裸电线试验方法.第12部分:镀层可焊性试验.焊球法

Test methods for bare wires.Part 12:Solderability test of coating.Solder globule method

硬质泡沫塑料拉伸性能试验方法

Test method for tensile properties of rigid cellular plastics

天然石材试验方法 第16部分：线性热膨胀系数的测定

Test methods for natural stone—Part 16: Determination of linear thermal expansion coefficient

天然石材试验方法 第9部分：通过测量共振基本频率测定动力弹性模数

Test methods for natural stone—Part 9: Determination of the dynamic modulus of elasticity by measuring the fundamental resonance frequency

金属材料 力学性能试验用试样制备指南

Metallic materials—Guide to test pieces preparation for mechanical testing

烧结金属材料（硬质合金除外）.碳含量测定用化学分析样品的制备

Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for carbon content

电缆和光缆.非金属材料试验方法.第201部分:通用试验.绝缘厚度测量

Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness

土工合成材料 - 摩擦特性的测定 - 第2部分:倾斜平面试验

Geosynthetics — Determination of friction characteristics — Part 2: Inclined plane test

塑料. 模制和挤制热塑聚氨酯. 第2部分: 试样的制备和性能测定

Plastics - Thermoplastic polyurethanes for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties

弹性地板覆盖物. 接缝强度的测定

Resilient floor coverings - Determination of seam strength

金属材料焊缝的破坏性试验.焊缝的宏观和微观检验

Destructive tests on welds in metallic materials — Macroscopic and microscopic examination of welds

透水混凝土试验方法第1部分：渗透速率

Testing methods for pervious concrete - Part 1: Infiltration rate

搪瓷. 样品的制备和热膨胀系数的测定

Vitreous and porcelain enamels - Preparation of samples and determination of thermal expansion coefficient

塑料.聚苯醚(PPE)模制和挤压成型材料.第2部分:试样制备和特性测定

Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties

塑料 - 未增塑的聚（氯乙烯）（Pvc-U）成型和挤出材料 - 第2部分:试样的制备和性能的测定

Plastics — Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties

塑料.薄膜和薄板断裂韧性的测定.基本断裂功（EWF）法

Plastics — Determination of fracture toughness of films and thin sheets — Essential work of fracture (EWF) method

建筑用隔热产品.厚度的测定

Thermal insulating products for building applications — Determination of thickness

塑料.环氧树脂.第2部分:试样制备和性能测定

Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins

塑料.聚甲基丙烯酸甲酯(PMMA)模制和挤压材料.第2部分:试样制备性能测定 技术勘误表1

Plastics-Poly(methy1methacrylate) (PMMA) moulding and extrusion materials- Part 2: Preparationof test specimens and determination of properties

铜及铜合金化学分析通则

General rules for chemical analysis of copper and copper alloys

钛和钛合金.取样方法

Titanium and titanium alloys -- Sampling methods

塑料.环氧树脂.第2部分:试验样品的制备和特性的测定

Plastics -- Epoxy resins -- Part 2: Preparation of test specimens and determination of properties

粮油检验苦杏仁苷含量的测定高效液相色谱法

Inspection of grains and oils-Determination of amygdalin content-High performance liquid chromatography

航天系列 电气和光学连接元件 试验方法 第307部分：盐雾

Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist

航空航天系列 光纤和电缆 机用 试验方法 第401部分：加速老化

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 401: Accelerated ageing

航空航天系列 纤维和电缆、光学、飞机用 试验方法 第407部分:易燃性

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 407: Flammability

航空航天系列 光纤和电缆 航空器用 试验方法 第517部分：电缆扎带夹紧试验

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 517: Cable tie clamping test

石油蜡嗅味试验法

Petroleum wax odor test method

涂层电绝缘性能测试方法 总则

General principles of test methods for electrical insulation properties of coatings

飞机质量钢清洁度磁粉检验程序

AIRCRAFT QUALITY STEEL CLEANLINESS Megnetic Particle Inspection Procedure

钢铁清洁度，特殊飞机质量磁粉探伤程序

Steel Cleanliness, Special Aircraft-Quality Magnetic Particle Inspection Procedure

δ铁素体含量的测定

Determination of Delta Ferrite Content

δ铁素体含量的测定

Determination of Delta Ferrite Content

钢清洁度 飞机质量马氏体耐腐蚀钢磁粉检验程序公制（SI）测量

Steel Cleanliness@ Aircraft Quality Martensitic Corrosion-Resistant Steels Magnetic Particle Inspection Procedure Metric (SI) Measurement

钢铁清洁度 特种飞机质量磁粉探伤程序公制（SI）测量

Steel Cleanliness@ Special Aircraft-Quality Magnetic Particle Inspection Procedure Metric (SI) Measurement

土工试验规程—土样的试样制备

Code for test of soil - preparation of soil samples

热应用接缝密封剂 第2部分:25°C下锥入度测定的试验方法

Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25°C

航空航天系列 纤维和电缆（光学用） 航空器用 试验方法 第505部分：电缆拉力强度

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength

整体（非成型）耐火制品 第4部分：浇注料的均匀性测定（ISO 1927-4:2012）

Monolithic (unshaped) refractory products - Part 4: Determination of consistency of castables (ISO 1927-4:2012)

塑料 热塑性聚酯/酯和聚醚/酯弹性体用于成型和挤出 第2部分：试样制备和性能测定（ISO 20029-2:2017）

Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimen and determination of properties (ISO 20029-2:2017)

聚乙烯 超高分子量聚乙烯（PE-UHMW）模具和挤出材料 第2部分：试样制备和性能测定（ISO 21304-2:2021）

Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)

塑料 氧指数测定燃烧行为 第1部分：一般要求（ISO 4589-1:2017）

Plastics - Determination of burning behaviour by oxygen index - Part 1: General requirements (ISO 4589-1:2017)

铬铁矿中多种成分的测定 X射线荧光光谱法（粉末压片）

Determination of various components in chromite by X-ray fluorescence spectrometry (powder compression)

饲草试样制备及常规成分美利体育登录入口官网技术规程　第2部分：水分测定

Technical rules for preparation of test samples and determination of general composition in forage—Part 2: Determination of moisture

航空航天系列钛及钛合金锻制产品低倍组织第001部分：一般要求

Aerospace series - Macrostructure of titanium and titanium alloy wrought products - Part 001: General requirements (Endorsed by AENOR in May of 2010.)

塑料 热塑性聚酯(TP)模塑和挤出材料 第2部分：测试样本的制备和性能测定

Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017)

塑料 环氧树脂 第2部分：试样的制备和交联环氧树脂性能的测定（ISO 3673-2:2012）

Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)