使用附录D中的表格测量得到的涂膜厚度值，反映固化/干燥后留在表面的涂层厚度，是涂层硬化后在基材上的残留厚度指标。
| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| AMPP Guide 21614-2023 规范 |
使用连续读取/扫描技术提高黑色金属和有色金属基材干涂层厚度数据统计质量的指南 Guide for Improving the Statistical Quality of Dry Coating Thickness Data on Ferrous and Non-ferrous Metal Substrates Using Continuous Read/Scanning Technology
|
2023-2-6 材料保护与性能协会 |
| AMPP TR21473-2024 指南标准 |
In-Situ Coating of Steel Pipelines via Pigging
|
2024-3-5 材料保护与性能协会 |
| ANSI/AWWA C210a-2020 规范 |
Liquid epoxy coatings and linings for steel water pipelines and their fittings
环氧涂层 衬里 |
2020-12-01 美国给水工程协会 |
| AS 2331.1.7:2006(R2017) 试验标准 |
金属及相关涂层的试验方法 局部厚度试验 薄涂层系统的干膜厚度的测定 尤其通过使用钻孔美利体育官网首页网址的破坏性方法测定绕涂产品的干膜厚度 Methods of test for metallic and related coatings - Local thickness tests - Measurement of dry film thickness of thin coating systems particularly by coil coated products by destructive means using a boring device
基底 涂层薄膜 |
2017 澳大利亚标准协会 |
| AS 3894.3:2002(R2013) 试验标准 |
Field testing of protective coatings Determination of dry film thickness
|
2013-1-1 澳大利亚标准协会 |
| AS/NZS 1580.108.1:1994(R2013) 试验 |
油漆及类似材料 测试方法 在金属底层上用非破坏性方法测定干薄膜厚度 Paints and related materials - Methods of test - Determination of dry film thickness on metallic substrates - Non-destructive methods
|
2013 澳大利亚/新西兰标准 |
| AS/NZS 1580.481.1.6:1998(R2013) 试验 |
Paints and related materials - Methods of test - Coatings - Exposed to weathering - Degree of erosion
侵蚀 |
2013 澳大利亚/新西兰标准 |
| ASME BPVC.IV-Errata-2021 试验标准 |
2021 ASME 锅炉和压力容器规范 第IV部分：加热锅炉建造规则 勘误表 2021 ASME Boiler and Pressure Vessel Code SECTION IV: Rules for Construction of Heating Boilers - Errata
|
2021 美国机械工程师协会 |
| ASTM D1005-95(2001) Test Method |
Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
|
1995 美国材料与试验协会 |
| ASTM D1005-95(2013) Test Method |
Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
千分尺 |
1995 美国材料与试验协会 |
| ASTM D1005-95(2024) 试验 |
Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
千分尺 |
2024-12-01 美国材料与试验协会 |
| ASTM D2134-93(2012) Test Method |
Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
|
1993 美国材料与试验协会 |
| ASTM D3023-98(2024) 试验 |
测定木制品上工厂涂覆的涂层对污渍和试剂的耐受性的标准实施规程 Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents
|
2024-02-01 美国材料与试验协会 |
| ASTM D4138-07a(2013) Practice |
Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
精度 |
2007 美国材料与试验协会 |
| ASTM D4138-07a(2017) 试验标准 |
Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
|
2017-12-01 美国材料与试验协会 |
| ASTM D4138-07a(2022) 试验 |
Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
显微镜 |
2022-06-01 美国材料与试验协会 |
| ASTM D4414-95(2020) 规范 |
Standard Practice for Measurement of Wet Film Thickness by Notch Gages
|
2020-06-01 美国材料与试验协会 |
| ASTM D5235-14 Test Method |
Standard Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products
渗透 |
2014 美国材料与试验协会 |
| ASTM D5235-18 试验标准 |
Standard Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products
渗透 |
2018-01-15 美国材料与试验协会 |
| ASTM D5235-18(2024) 试验 |
Standard Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products
渗透 |
2024-02-01 美国材料与试验协会 |
| ASTM D5796-10(2015) Test Method |
使用镗孔装置通过破坏性方法测量薄膜线圈涂覆系统的干膜厚度的标准测试方法 Standard Test Method for Measurement of Dry Film Thickness of Thin-Film Coil-Coated Systems by Destructive Means Using a Boring Device
涂层薄膜 |
2010 美国材料与试验协会 |
| ASTM D7091-13 Practice |
对应用于黑色金属的非磁性涂层以及应用于非黑色金属的非磁性, 不导电涂层的干膜厚度进行无损测量的标准实施规程 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
测厚仪 |
2013 美国材料与试验协会 |
| ASTM D7378-16(2024) 试验 |
Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness
涂层粉末 |
2024-02-01 美国材料与试验协会 |
| BH GSO EN 13523-1:2024 |
Coil coated metals - Test methods - Part 1: Coating thickness
涡流法 磁感应法 |
2024 海湾阿拉伯国家合作委员会标准组织 |
| BS 4652:1995(1998) 规范 |
Specification for zinc-rich priming paint (organic media)
喷砂清理 富锌底漆 |
1998-1-1 英国标准学会 |
| BS 4652:1995(2008) 规范 |
Specification for zinc enriched primers (organic medium)
喷砂清理 富锌底漆 |
2008 英国标准学会 |
| BS EN 13523-1:2017 试验标准 |
Coil coated metals. Test methods. Film thickness
金属基材 |
2017-02-28 英国标准学会 |
| BS EN 13523-1:2024 试验 |
Coil coated metals. Test methods - Film thickness
涡流法 磁感应法 |
2024-05-31 英国标准学会 |
| BS EN ISO 10890:2010 试验 |
涂料和清漆.利用物质平衡估算法对来自防垢油漆的杀虫剂释放率建模 Paints and varnishes. Modelling of biocide release rate from antifouling paints by mass-balance calculation
|
2010-11-30 英国标准学会 |
| BS EN ISO 19277:2018 试验 |
石油、石化和天然气工业 绝缘保护涂层系统的资格测试和验收标准 Petroleum, petrochemical and natural gas industries. Qualification testing and acceptance criteria for protective coating systems under insulation
|
2019-01-31 英国标准学会 |
| BS EN ISO 19399:2017 试验 |
Paints and varnishes. Wedge-cut method for determination of film thickness (scribe and drill method)
|
2018-02-09 英国标准学会 |
| BS EN ISO 29601:2026 试验 |
Paints and varnishes. Corrosion protection by protective paint systems. Assessment of porosity in a dry film
不连续性 孔隙 |
2026-04-30 英国标准学会 |
| BS ISO 19399:2016 试验标准 |
Paints and varnishes. Wedge-cut method for determination of film thickness (scribe and drill method)
|
2016-05-31 英国标准学会 |
| DIN /TR 55692-8:2024 试验标准 |
Coatings on plastics and composites - Part 8: Film thickness
涂层厚度 湿膜厚度 |
2024-07-01 德国标准化学会 |
| DIN 18195 Beiblatt 1 E:2015-12 试验 |
建筑物的防水处理 关于液体涂覆防水材料厚度美利体育登录入口官网及结果评估的方法 Waterproofing of buildings Information on methods for the determination of thickness of liquid-applied waterproofing materials and evaluation of the results
湿膜厚度 |
2015-12-01 德国标准化学会 |
| DIN 55655-14:2019-01 试验 |
Electrodeposition paint deposition behavior
|
2019-01 德国标准化学会 |
| DIN EN 13523-1:2024 |
Coil coated metals - Test methods - Part 1: Film thickness; German version EN 13523-1:2024
涡流法 磁感应法 |
2024-06-01 德国标准化学会 |
| DIN EN 13523-1:2024-06 |
Coil coated metals - Test methods - Part 1: Film thickness
涡流法 磁感应法 |
2024-06-01 德国标准化学会 |
| DIN EN ISO 10890:2011 规范 |
涂料和清漆.利用质量均衡估算法计算防污漆中杀生物剂释放率的建模(ISO 10890-2010);德文版本EN ISO 10890-2010 Paints and varnishes - Modelling of biocide release rate from antifouling paints by mass-balance calculation (ISO 10890:2010); German version EN ISO 10890:2010
生物杀灭剂 |
2011-02 德国标准化学会 |
| DIN EN ISO 10890:2011-02 试验 |
油漆和清漆 通过质量平衡计算对防污油漆中的杀菌剂释放率进行建模 Paints and varnishes - Modelling of biocide release rate from antifouling paints by mass-balance calculation (ISO 10890:2010); German version EN ISO 10890:2010
生物杀灭剂 |
2011-02 德国标准化学会 |
| DIN EN ISO 12944-5:2008 规范 |
油漆和清漆.防护涂料系统对钢结构件的防腐蚀保护.第5部分:防护涂料系统 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2007); English version of DIN EN ISO 12944-5:2008-01
涂料系统 腐蚀防护 |
2008-01 德国标准化学会 |
| DIN EN ISO 12944-5:2018 试验/规范 |
油漆和清漆.防护涂料系统对钢结构件的防腐蚀保护.第5部分:防护涂料系统(ISO 12944-5-2018); 德文版本EN ISO 12944-5-2018 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2018); German version EN ISO 12944-5:2018
腐蚀保护 |
2018-06-01 德国标准化学会 |
| DIN EN ISO 19277:2019 试验标准 |
石油、石化和天然气工业 绝缘保护涂层系统的资格测试和验收标准（ISO 19277:2018）；英文版 EN ISO 19277:2018 Petroleum, petrochemical and natural gas industries - Qualification testing and acceptance criteria for protective coating systems under insulation (ISO 19277:2018); English version EN ISO 19277:2018
保温层下腐蚀 |
2019-03-01 德国标准化学会 |
| DIN EN ISO 19277:2019-03 试验标准 |
石油、石化和天然气行业-绝缘保护涂层系统的资格测试和验收标准 Petroleum, petrochemical and natural gas industries - Qualification testing and acceptance criteria for protective coating systems under insulation (ISO 19277:2018); English version EN ISO 19277:2018
|
2019-03 德国标准化学会 |
| DIN EN ISO 19399 E:2017-07 试验标准 |
Wedge-cut method for determination of film thickness in paints and varnishes (draft)
|
2017-07 德国标准化学会 |
| DIN EN ISO 19399:2018 试验 |
油漆和清漆 用于测定膜厚度的楔形切割法（划线和钻孔法）（ISO 19399:2016） Paints and varnishes - Wedge-cut method for determination of film thickness (scribe and drill method) (ISO 19399:2016)
|
2018-02-01 德国标准化学会 |
| DIN EN ISO 19840 E:2002-04 试验 |
涂覆材料 保护性涂料系统对粗糙钢构表面的防腐蚀保护 测量干燥涂层厚度及其接受准则 Coating materials - Protective coating systems - Corrosion protection of roughened steel surfaces - Measurement of dry coating thickness and its acceptance criteria
|
2002-04 德国标准化学会 |
| GOST 31993-2024 试验标准 |
Coating materials. Determination of film thickness
涂层厚度 湿膜厚度 |
2024-11-25 俄罗斯标准局 |
| GOST 34667.5-2021 试验/规范 |
油漆和清漆材料 使用油漆和清漆系统保护钢结构免受腐蚀 第5部分：防护漆系统 Coating materials. Corrosion protection of steel structures by coating systems. Part 5. Protective paint systems
防护涂料系统 |
2022-01-18 俄罗斯标准局 |
| ISO 10890:2010 试验 |
涂料和清漆.利用质量均衡估算法计算防污漆中杀生物剂释放率的建模 Paints and varnishes - Modelling of biocide release rate from antifouling paints by mass-balance calculation
|
2010-10 国际标准化组织 |
| ISO 12944-5:2007 规范 |
涂料和清漆.用防护漆系统对钢结构的腐蚀保护.第5部分:防护涂料系统 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems
涂料体系 |
2007-09 国际标准化组织 |
| ISO 19399:2016 试验 |
Paints and varnishes - Wedge-cut method for determination of film thickness (scribe and drill method)
基底 |
2016-05 国际标准化组织 |
| ISO 19840:2012 试验标准 |
涂料和清漆.用防护漆系统对钢结构的腐蚀防护.粗糙表面上干膜厚度的测量和验收标准 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces
表面轮廓 |
2012-09 国际标准化组织 |
| ISO 2808:2007 |
Paints and varnishes - Determination of film thickness
湿膜厚度 |
2007-02 国际标准化组织 |
| ISO 2808:2019 试验标准 |
Paints and varnishes — Determination of film thickness
涂层厚度 湿膜厚度 |
2019-07-26 国际标准化组织 |
| ISO 29601:2011 试验 |
Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film
不连续处 孔隙 |
2011-04-15 国际标准化组织 |
| LST EN 13523-1:2024 |
Coil coated metals - Test methods - Part 1: Film thickness
涡流法 磁感应法 |
2024-07-15 立陶宛标准局 |
| LST EN ISO 19277:2019 试验 |
石油、石油化学和天然气工业 隔离下防腐涂层系统的资格认证及验收准则（ISO 19277:2018） Petroleum, petrochemical and natural gas industries - Qualification testing and acceptance criteria for protective coating systems under insulation (ISO 19277:2018)
人工老化 |
2019-03-29 立陶宛标准局 |
| LST EN ISO 19399:2018 试验 |
涂料与清漆 用楔形切口法测定膜厚（划痕和钻孔法）(ISO 19399:2016) Paints and varnishes - Wedge-cut method for determination of film thickness (scribe and drill method) (ISO 19399:2016)
|
2018-02-28 立陶宛标准局 |
| LST EN ISO 2808:2019 试验 |
Paints and varnishes - Determination of film thickness (ISO 2808:2019)
涂层厚度 湿膜厚度 |
2019-11-29 立陶宛标准局 |
| NACE 02107-2007 指南标准 |
与钢结构,管道和美利体育官网首页网址一起使用的螺纹紧固件的防护涂料.项目编号24232 Coatings for Protection of Threaded Fasteners Used with Structural Steel, Piping, and Equipment (Item No. 24232)
|
2007-03-01 美国防腐工程师协会 |
| NACE TM0186-2016 试验 |
用于油和气工业金属管内部表面的聚乙烯涂层应用情况的非破坏性测试方法 Holiday Detection of Internal Tubular Coatings of 355 to 760 ?m (14 to 30 mils) Dry-Film Thickness
金属管材 |
2016-02-12 美国防腐工程师协会 |
| NF EN 13523-1:2024 |
Coil coated metals - Test methods - Part 1 : film thickness
涡流法 磁感应法 |
2024-04-01 法国标准化协会 |
| NF F19-355:1995 规范 |
Railway rolling stock. Cataphorectic coating pieces.
|
1995-12-01 法国标准化协会 |
| NF T 30-124 试验标准 |
Measurement method of dry paint film thickness after painting Non-destructive magnetic flux method
|
2020-03-01 法国标准化协会 |
| NF T30-124:2020 试验标准 |
Paintsand varnishes - Measurement of dry film thickness - Non-destructive method with a magnetic flux
校准曲线 |
2020-1-1 法国标准化协会 |
| PIP CTSE2024-2004 试验/规范 |
External Coating Systems Data Sheet Epoxy Mastic/Urethane (2 Coats) EM/UR
外部涂层系统 |
2024-2-1 流程工业实践 |
| PIP CTSL1000-2017 Datasheets 试验 |
Process Industry Practices CTSL1000 - Application of Internal Linings
|
2017-10-01 流程工业实践 |
| SS-EN 13523-1:2009 试验 |
Coil coated metals - Test methods - Part 1: Film thickness
|
2009 瑞典标准研究所 |
| SS-EN 13523-1:2024 |
Coil coated metals - Test methods - Part 1: Film thickness
涡流法 磁感应法 |
2024 瑞典标准研究所 |
| SS-EN ISO 19277:2019 规范标准 |
石油、石化和天然气工业 绝缘保护涂层系统的合格试验和验收标准（ISO 19277:2018） Petroleum, petrochemical and natural gas industries - Qualification testing and acceptance criteria for protective coating systems under insulation (ISO 19277:2018)
|
2019-02-18 瑞典标准研究所 |
| SS-EN ISO 19399:2017 试验标准 |
涂料和清漆 楔形切割法确定涂层厚度（划线钻孔方法）（ISO 19399:2016） Paints and varnishes - Wedge-cut method for determination of film thickness (scribe and drill method) (ISO 19399:2016)
|
2017 瑞典标准研究所 |
| SS-EN ISO 22553-6:2021 试验 |
涂料和清漆 电沉积涂覆层 第6部分：进料划痕（ISO 22553-6:2019） Paints and varnishes - Electro-deposition coatings - Part 6: Entry marks (ISO 22553-6:2019)
电沉积涂层 |
2021 瑞典标准研究所 |
| SS-ISO 15741:2002 规范 |
油漆和清漆 用于非腐蚀性气体的陆上和海上钢管道内部的减摩涂层 Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases
|
2002 瑞典标准研究所 |
| SS-ISO 19399:2016 试验标准 |
涂料和清漆 楔切法测定薄膜厚度（划线钻孔方法）（ISO 19399:2016 等同采用） Paints and varnishes - Wedge-cut method for determination of film thickness (scribe and drill method) (ISO 19399:2016, IDT)
|
2016-05-18 瑞典标准研究所 |
| SS-ISO 19840:2005 试验标准 |
涂料和清漆 用防护性涂料系统对钢结构进行防腐蚀保护 粗糙表面上干膜厚度的测量及验收标准（ISO 19840:2004 IDT） Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces (ISO 19840:2004, IDT)
|
2005 瑞典标准研究所 |
| SS-ISO 19840:2012 试验 |
涂料和清漆 钢结构的防腐保护 粗糙表面干膜厚度的测量及验收准则（ISO 19840:2012 等同） Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces (ISO 19840:2012, IDT)
|
2012 瑞典标准研究所 |
| SSPC PA 14-2021 试验 |
厚膜聚脲和聚氨酯涂装在混凝土、钢材及有色金属上的应用（使用多组分美利体育官网首页网址） Application of Thick Film Polyurea and Polyurethane Coatings to Concrete, Steel, and Non-Ferrous Metals Using Plural-Component Equipment
|
2021-12-22 美国保护涂层协会 |
| SSPC PA 2-2022 试验标准 |
Procedure for Determining Conformance to Dry Coating Thickness Requirements
测厚仪 |
2022-04-12 美国保护涂层协会 |
| SSPC PA 9-2015(2018) 试验标准 |
Measurement of Dry Coating Thickness Using Ultrasonic Gages
|
2015-07-20 美国保护涂层协会 |
| SSPC PA COM-2016 规范 |
Coating Application Specifications and Guides
表面预处理 |
2016-07-01 美国保护涂层协会 |
| SSPC Paint 32-2006(2015) 规范 |
SSPC-Paint 32
沥青涂层 |
2006-11-01 美国保护涂层协会 |
| SSPC Paint 37-2002(2004) 规范 |
Waterborne Epoxy Coating for Cementitious Substrates Performance-Based
附着力 |
2002-12-01 美国保护涂层协会 |
| SSPC PS 1.09-1982(2004) 规范 |
Three-Coat Oil Base Zinc Oxide Painting System (Without Lead or Chromate Pigment)
涂装系统 表面预处理 |
2004-11-01 美国保护涂层协会 |
| SSPC PS 12.01-2002(2004) 规范 |
One Coat Zinc-Rich Painting System
表面预处理 |
2002-04-01 美国保护涂层协会 |
| TB/T 2879.6-1998 规程 |
Coatings and coatings for railway rolling stock - Part 6: Regulations for coating quality inspection and acceptance
|
1998-02-24 行业标准-铁道 |
| UNE-EN 13523-1:2024 |
Coil coated metals - Test methods - Part 1: Film thickness
涡流法 磁感应法 |
2024-11-27 西班牙标准化协会 |
| UNE-EN ISO 19399:2018 试验标准 |
Paints and varnishes - Wedge-cut method for determination of film thickness (scribe and drill method) (ISO 19399:2016)
|
2018-12-19 西班牙标准化协会 |
| UNE-EN ISO 2808:2020 术语 |
Paints and varnishes - Determination of film thickness (ISO 2808:2019)
涂层厚度 湿膜厚度 |
2020-10-07 西班牙标准化协会 |
| UNI EN 13523-1:2024 |
Coil coated metals - Test methods - Part 1: Film thickness
涡流法 磁感应法 |
2024-07-04 意大利统一标准化组织 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证：京ICP证110310号
页面更新时间: 2026-05-30 21:37