美利体育登录入口官网

焊丝钢筋的规范 制造 和施工使用指南

GUIDE FOR THE SPECIFICATION@ MANUFACTURE@ AND CONSTRUCTION USE OF WELDED WIRE REINFORCEMENT

冷成型合金 625 (UNS N06625) 在极低 pH 值和高氯化物条件下的应力腐蚀开裂 (SCC) 和电化学腐蚀研究

Stress Corrosion Cracking (SCC) and Electrochemical Corrosion Study of Cold Formed Alloy 625 (UNS N06625) In Extremely Low pH and High Chloride Conditions

冷加工对UNS N08935超级奥氏体不锈钢在氯化物和酸性环境中的影响

Effect of Cold Working on UNS N08935 Super Austenitic Stainless Steel in Chloride and Acid Environments

铝及铝合金.拔出式线、杆、棒和条

Aluminium and aluminium alloys - Drawn wire, rod, bar and strip

冷加工焊接奥氏体不锈钢管的标准规范

Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe

焊接沉淀硬化或冷加工镍合金管标准规范

Standard Specification for Welded Precipitation Hardenable or Cold Worked, Nickel Alloy Tube

铝和铝合金轧制或冷加工棒材杆材金属丝标准规格(公制)

Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric)

UNS N08367焊接管规格

Standard Specification for UNS N08367 Welded Tube

UNS N08367焊接管的标准规范

Standard Specification for UNS N08367 Welded Tube

60%钯40%银电触点材料标准规范

Standard Specification for 60 % Palladium-40 % Silver Electrical Contact Material

不锈钢凹圆头螺钉和平沉头螺钉的标准规格 (米制)

Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)

不锈钢在建筑中的应用

Application of stainless steel in construction

镍-铬-铁合金板材、片材和带材规范:退火的(镍基合金,铬 15.5、铁 8)

Specification for nickel-chromium-iron alloy plate, sheet and strip: annealed (nickel base, Cr 15.5, Fe 8)

航空航天系列 耐热合金NI-PH2601 固溶处理和冷加工 锻造紧固件棒材 D≤50毫米 1 270 MPa ≤ Rm ≤ 1 550 MPa

Aerospace series. Heat resisting alloy NI-PH2601. Solution treated and cold worked. Bar for forged fasteners. D ≤ 50 mm. 1 270 MPa ≤ Rm ≤ 1 550 MPa

储气瓶.可再充装的焊接不锈钢气瓶.试验压力≤6MPa

Gas cylinders - Refillable welded stainless steel cylinders - Test pressure 6 MPa and below

航空航天系列 耐热合金 NI-PH2601 固溶处理和冷加工 锻造紧固件棒材 D 50 mm 1 270 MPa R 1 550 MPa（草案）

Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D 50 mm - 1 270 MPa R 1 550 MPa

航空航天系列 耐热合金 NI-PH1302 (NiCr20Co13Mo4Ti3Al) 固溶处理和冷加工 锻造紧固件棒材 3 mm D 30 mm（草案）

Aerospace series - Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) - Solution treated and cold worked - Bar for forged fasteners - 3 mm D 30 mm

航空航天系列 耐热镍基合金（NI-P100HT） 冷加工和软化 紧固件连续锻造或挤压用棒材和线材 3 mm D 30 mm（草案）

Aerospace series - Heat resisting nickel base alloy (NI-P100HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm D 30 mm

航空航天系列 耐热镍基合金（Ni-P101HT） 冷加工和软化 紧固件连续锻造或挤压用棒材和线材 3mm D 30mm（草案）

Aerospace series - Heat resisting nickel base alloy (Ni-P101HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm D 30 mm

航空航天系列 耐热合金 FE-PA2601 软化和冷加工 锻造紧固件棒材 D<50 mm, 1 100 MPa

航空航天系列 耐热合金X6NiCrTiMnMoV26-15（1.4944）软化及冷加工状态 锻造紧固件用线材 D≤15mm 1100MPa≤Rm≤1300MPa

Aerospace series – Heat-resisting alloy X6NiCrTiMnMoV26-15 (1.4944) – Softened and cold worked – Wire for forged fasteners – D ≤ 15 mm – 1 100 MPa ≤ Rm ≤ 1 300 MPa

取水定额 第64部分：建筑卫生陶瓷

Water intake quotas Part 64: Building and sanitary ceramics

不锈钢冷加工钢棒

Cold finished stainless steel bar

铜及其合金 词汇 第五部分：加工与处理方法

Copper and Its Alloys. Vocabulary. Part 5: Processing Methods and Treatments.

铜及其合金 热处理 定义与标识

Cobre y sus aleaciones. Temples. Definiciones y designaciones.

航空航天系列 耐热合金 NI-PH2601 固溶处理及冷加工 锻制紧固件用棒材 D ≤ 50 mm 1 270 MPa ≤ Rm ≤ 1 550 MPa

Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D ≤ 50 mm - 1 270 MPa ≤ Rm ≤ 1 550 MPa

航空航天系列 耐热合金NI-PH1302 (NiCr20Co13Mo4Ti3Al) 固溶处理及冷加工 锻造紧固件用棒材 3 mm ≤ D ≤ 30 mm

Aerospace series - Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) - Solution treated and cold worked - Bar for forged fasteners - 3 mm ≤ D ≤ 30 mm

航空航天系列 钛合金TI-P64003-冷加工与应力消除 压力系统用无缝管-4 mm ≤ D ≤ 51 mm 690 MPa ≤ Rm ≤ 1 030 MPa

Aerospace series - Titanium alloy TI-P64003 - Cold worked and stress relieved - Seamless tube for pressure systems - 4 mm ≤ D ≤ 51 mm - 690 MPa ≤ Rm ≤ 1 030 MPa

不锈钢在硝酸中的腐蚀行为及冷加工、敏化处理及其组合对腐蚀性能的影响

Corrosion behavior of stainless steel in nitric acid and the effects of cold working, sensitization treatment and their combination on corrosion performance

冷加工对 CrNiMoN 奥氏体不锈钢腐蚀疲劳行为的影响

The effect of cold working on the corrosion fatigue behaviour of a CrNiMoN austenitic stainless steel

合金 600 和合金 690 在模拟压水反应堆一次水中进行恒载试验时裂纹萌生

Crack Initiation for Alloy 600 and Alloy 690 During Constant Load Tests in Simulated Pressurized Water Reactor Primary Water

铝合金 2014 Bar Rod Wire and Special Shapes Rolled Drawn or Cold Finished（UNS A92014）

Aluminum Alloy@ 2014@ Bar@ Rod@ Wire and Special Shapes@ Rolled@ Drawn@ or Cold Finished (UNS A92014)

铝及铝合金、棒材、棒材、线材或特殊形状；轧制、拉制或冷加工；通用规范

Aluminum and Aluminum Alloy, Bar, Rod, Wire, or Special Shapes; Rolled, Drawn, or Cold Finished; General Specification For

公差碳钢棒

Tolerances Carbon Steel Bars

碳钢棒材公差

Tolerances Carbon Steel Bars

公差合金钢棒

TOLERANCES Alloy Steel Bars

镁合金 板材和板材 3.2Th 0.70Zr 冷轧和部分退火（UNS M13310）

Magnesium Alloy@ Sheet and Plate 3.2Th - 0.70Zr Cold Rolled and Partially Annealed (UNS M13310)

钢板和钢带，耐腐蚀 18Cr 8Ni 冷轧 125,000 psi

STEEL SHEET AND STRIP, CORROSION RESISTANT 18Cr - 8Ni Cold Rolled - 125,000 psi

耐腐蚀钢板材和带材 18Cr 8Ni (301) 冷轧 125 ksi (862 MPa) 拉伸强度

Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 8Ni (301) Cold Rolled, 125 ksi (862 MPa) Tensile Strength

钢，耐腐蚀，薄板和带材 18Cr 8Ni 冷轧，150 ksi（1034 MPa）抗拉强度

Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni Cold Rolled, 150 ksi (1034 MPa) Tensile Strength

钢 耐腐蚀 薄板和钢带 18Cr 8Ni（SAE 30301）冷轧 185 ksi（1276 MPa）抗拉强度（UNS S30100）

Steel@ Corrosion Resistant@ Sheet and Strip 18Cr – 8Ni (SAE 30301) Cold Rolled@ 185 ksi (1276 MPa) Tensile Strength (UNS S30100)

钢 耐腐蚀 安全线 18Cr 11.5Ni（SAE 30305）固溶热处理 冷加工（UNS S30500）

Steel@ Corrosion Resistant@ Safety Wire@ 18Cr - 11.5Ni (SAE 30305) Solution Heat Treated@ Cold Finished (UNS S30500)

125 ksi (862 MPa)拉伸强度的1/4硬度耐腐蚀18Cr 9.0Ni(SAE 30302)冷轧钢薄板材和带材

Steel@ Corrosion-Resistant@ Sheet@ Strip@ and Plate 18Cr - 9.0Ni (SAE 30302) Cold Rolled@ 1/4 Hard@ 125 ksi (862 MPa) Tensile Strength (UNS S30200)

钢 耐腐蚀 薄板和钢带 18Cr 9.0Ni（SAE 30302）冷轧 1/2 硬 150 ksi（1034 MPa）抗拉强度（UNS S30200）

Steel@ Corrosion-Resistant@ Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled@ 1/2 Hard@ 150 ksi (1034 MPa) Tensile Strength (UNS S30200)

冷轧,3/4硬度,175 ksi(1207 MPa)拉伸强度的耐腐蚀钢片材带材18Cr 9.0Ni

Steel@ Corrosion-Resistant@ Sheet and Strip 18Cr - 9.0Ni (302) Cold Rolled@ 3/4 Hard@ 175 ksi (1207 MPa) Tensile Strength (UNS S30200)

UNS G87400、125 KSI MIN2500-28 UNF系列镉金属厚板钢钻头盘头螺钉

Steel@ Corrosion-Resistant@ Sheet@ Strip@ and Plate 19Cr - 9.2Ni (304) Cold Rolled@ 125 ksi (862 MPa) Tensile Strength (UNS S30400)

钢，耐腐蚀，薄板和带材 19Cr 9.2Ni（304）冷轧，1/2 硬，150 ksi（1034 MPa）抗拉强度

Steel, Corrosion-Resistant, Sheet and Strip 19Cr - 9.2Ni (304) Cold Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile Strength

钢，耐腐蚀，薄板和钢带 19Cr 9.2Ni（304）冷轧，3/4 硬，175 ksi（1207 MPa）抗拉强度

Steel, Corrosion-Resistant, Sheet and Strip 19Cr - 9.2Ni (304) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength

标定应力断裂性的拉伸强度185ksi的UNS N07718镍合金螺栓和螺钉采购规范

Bolts and Screws, Nickel Alloy, UNS N07718 Tensile Strength 185 ksi Stress Rupture Rated Procurement Specification FSC 5306 [Superseded: SAE AMS 7467C]

公差 公制铜和铜合金棒材和棒材

Tolerances@ Metric Copper and Copper Alloy Bars and Rods

公差 公制碳钢棒

Tolerances@ Metric Carbon Steel Bars

公差 公制低合金钢棒

Tolerances@ Metric Low-Alloy Steel Bars

航空食品.第1部分：冷加工车间环境微生物检验方法

In-flight food service. Part 1:Method of environmental microorganism examination in cold processing plants

热成型用高强度钢冷轧扁平产品 第3部分：正火或正火轧制钢材的技术交货条件

Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels

航空系列 耐热合金NI-PH2601 固溶处理和冷加工 锻造紧固件用棒材 D = 50 mm 1 270 MPa = Rm = 1 550 MPa

Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D = 50 mm - 1 270 MPa = Rm = 1 550 MPa

航空系列 耐热镍基合金（NI-P101HT） 冷加工和固溶处理 用于紧固件的棒材 直径3毫米 = 截面直径50毫米

Aerospace series - Heat resisting nickel base alloy (NI-P101HT) - Cold worked and solution treated - Bars for machining for fasteners - 3 mm = D = 50 mm

航空系列 耐热合金X6NiCrTiMoV26-15 (1.4980) 软化和冷加工 锻造紧固件用线材 D = 15 mm 900 MPa = Rm = 1 100 MPa

Aerospace series - Heat resisting alloy X6NiCrTiMoV26-15 (1.4980) - Softened and cold worked - Wires for forged fasteners - D = 15 mm - 900 MPa = Rm = 1 100 MPa

航空航天系列 耐热合金NI-PH2601 解析处理和冷加工 锻造紧固件用棒材 直径D=50 mm 屈服强度Rm=1 550 MPa = 抗拉强度Rm=1 830 MPa

Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D = 50 mm - 1 550 MPa = Rm = 1 830 MPa

气瓶 可充装焊接不锈钢气瓶 第2部分：试验压力大于6 MPa（等同采用ISO 18172-2:2007）

Gas cylinders - Refillable welded stainless steel cylinders - Part 2: Test pressure greater than 6 MPa (ISO 18172-2:2007, IDT)

弹性元件用合金3J21

3J21 alloy for elastic component