美利体育登录入口官网

纺织品的试验方法.物理试验..用Martindale法测定织物的耐磨性.质量损失的测定

Methods of test for textiles - Physical tests - Determination of the abrasion resistance of fabrics by the Martindale method - Determination of mass loss

固体混凝土联锁铺砌石块的解冻和除冰盐耐用性的标准试验方法

Standard Test Method for Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units

用于测量饱和混凝土一维干燥的质量损失与时间的标准试验方法

Standard Test Method for Measurement of Mass Loss versus Time for One-Dimensional Drying of Saturated Concretes

固体废物润湿和干燥试验的标准试验方法

Standard Test Method for Wetting and Drying Test of Solid Wastes

油和柏油化合物加热减量用标准试验方法

Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds

固体燃烧残留物着火损失（LOI）的标准试验方法

Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues

海上环境用光电器件的盐水压力浸渍和温度试验的标准试验方法

Standard Test Method for Loss of Mass in a Reducing Gas Atmosphere for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)

通过热重测定法进行干燥干燥的标准测试方法

Standard Test Methods for Loss-On-Drying by Thermogravimetry

热重美利体育登录入口官网的质量损耗和剩余量测量验证的标准试验方法

Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers

热重美利体育登录入口官网的质量损耗和剩余量测量验证的标准试验方法

Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers

热失重美利体育登录入口官网的质量损失和残留物测量验证的标准试验方法

Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers

热重美利体育登录入口官网质量损失、残留物和温度测量验证的标准试验方法

Standard Test Method for Mass Loss, Residue, and Temperature Measurement Validation of Thermogravimetric Analyzers

通过质量损失评估拘留和惩教机构床垫火灾行为的试验方法

Standard Test Method for Assessment of Fire Behavior of Mattresses in Detention and Correctional Facilities by Mass Loss

腐蚀试样的制备清洁处理和评估用标准操作规程

Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens

准备、清洁和评估腐蚀试验试样的标准做法

Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens

金属涂层钢样品大气腐蚀试验记录数据的标准实践

Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens

用接触硝酸环境之后的重量损失来测定5XXX系列铝合金晶间腐蚀敏感性的标准试验方法 (NAMLT试验)

Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)

涂料试验方法.第J5部分:粉末涂层加热质量损失测定

Methods of test for paints - Testing of coating powders - Determination of loss of mass of coating powders on heating

工业用氯化钠的分析 水分含量测定方法

Analysis of sodium chloride for industrial use. Method for determination of moisture content

混凝土结构的保护和修正用的产品和系统.试验方法.盐力解冻后疏水性浸渍混凝土的质量损失的测定

Products and systems for the protection and repair of concrete structures - Test methods - Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress

集料热性能和老化性能试验.耐冻性和耐融性的测定

Tests for thermal and weathering properties of aggregates - Determination of resistance to freezing and thawing

民用爆炸物 起爆器和起爆雷管继电器 普通和半成品起爆雷管抗振动性能的验证

Explosives for civil uses. Detonators and detonating cord relays - Verification of resistance to vibration of plain and semi-finished detonators

致密定形耐火制品 - 试验方法 - 第16部分：耐硫酸性的测定

Dense shaped refractory products — Methods of test — Part 16 : Determination of resistance to sulfuric acid

涂料和其它相关制品应用前钢基质的预处理 非金属喷砂清理磨料试验方法 湿度的测定

Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of moisture

纺织品.用马丁代尔法(Martindale)对织物抗磨损性的测定.质量损失的测定

Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Determination of mass loss

涂料粉末 烘干质量损失的测定

Coating powders. Determination of loss of mass on stoving

金属和合金的腐蚀 从腐蚀试验样本中去除腐蚀产品

Corrosion of metals and alloys. Removal of corrosion products from corrosion test specimens

尿失禁辅助吸收尿液 聚丙烯酸酯高吸水性粉末 以加热失重估算水分含量的试验方法

Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders - Test method for estimation of the moisture content as weight loss upon heating

生咖啡 — 105 °C 时质量损失的测定

Green coffee — Determination of loss in mass at 105 °C

致密定型耐火制品抗硫酸性测定法

Method for determination of resistance to sulfuric acid of dense shaped refractory products

木和木质产品的耐久性.木质板.抗损坏木材的担子菌的性能的测定试验方法

Durability of wood and wood-based products - Wood-based panels - Method of test for determining the resistance against wood-destroying basidiomycetes

咖啡及咖啡制品质量测定 真空烘箱法

Analysis of coffee and coffee products Determination of loss in mass of soluble coffee Part 2: Method using vacuum oven (routine method); Amendment A1

咖啡和咖啡制品的分析.溶解咖啡质量缺失测定.第2部分:真空炉法(常规方法)

Analysis of coffee and coffee products - Determination of loss in mass of soluble coffee - Part 2: Method using vacuum oven (routine method)

咖啡和咖啡产品的分析 可溶咖啡质量损失的测定 第2部分：使用真空烘箱的方法（常规方法）

Analysis of coffee and coffee products - Determination of loss in mass of soluble coffee - Part 2: Method using vacuum oven (routine method)

咖啡和咖啡代用品分析.测定溶解咖啡质量丢失.第4部分:在大气压环境下加热速溶咖啡和速溶咖啡产品的方法

Analysis of coffee and coffee products - Determination of loss in mass of soluble coffee - Part 4: Method for soluble coffee and soluble coffee products by heating under atmospheric pressure (routine method)

炒研磨咖啡.103℃时质量损失测定(水分测定常规方法)

Roasted ground coffee - Determination of loss in mass at 103 °C (Routine method for the determination of moisture content)

烘焙研磨咖啡 103°C 质量损失的测定（水分含量测定的常规方法）

Roasted ground coffee - Determination of loss in mass at 103 °C (Routine method for the determination of moisture content)

茶叶的试验 未磨碎茶叶在103℃下的质量损失的测定

Analysis of tea; determination of loss in mass of unground tea at 103 °C

茶叶的试验.未磨碎茶叶在103℃下的质量损失的测定

Analysis of tea - Determination of loss in mass of unground tea at 103 °C

茶叶分析 103°C 下未磨碎茶质量损失的测定

Analysis of tea - Determination of loss in mass of unground tea at 103 °C

沥青和沥青粘接剂的检验.蒸发试验.第1部分:石油稀释沥青制品的检验

Bitumen and bituminous binders - Evaporation test - Part 1: Testing of petroleum cut-back bitumen

沥青和沥青粘合剂 蒸发试验 第1部分：石油稀释沥青的试验

Bitumen and bituminous binders - Evaporation test - Part 1: Testing of petroleum cut-back bitumen

沥青和沥青粘合剂 工业沥青加热后质量损失的测定（草案）

Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen

沥青和沥青粘合剂.工业沥青加热后质量损失的测定.英文版本DIN EN 13303-2009-07

Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen; English version of DIN EN 13303:2009-07

沥青和沥青粘合剂 工业沥青加热后质量损失的测定

Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen; German version EN 13303:2017

混凝土构件的保护和检修用产品和系统.试验方法.盐力解冻后疏水性浸渍混凝土质量损失的测定; 德文版本 EN 13581:2002

Products and systems for the protection and repair of concrete structures - Test method - Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress; German version EN 13581:2002

用于保护和修复混凝土结构的产品和系统 测试方法 冻融盐应力后疏水性浸渍混凝土质量损失的测定

Products and systems for the protection and repair of concrete structures - Test method - Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress; German version EN 13581:2002

集料的热性能和风化性能的试验.第1部分:抗冻融性的测定

Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing English version of DIN EN 1367-1:2007-06

骨料热性能和耐候性能试验第1部分：抗冻融性能的测定

Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing; German version EN 1367-1:2007

集料的热性能和风化性能试验 第7部分：轻集料抗冻结和解冻性的测定（草案）

Tests for thermal and weathering properties of aggregates - Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates

民用爆炸物.雷管和传爆管.第8部分:普通雷管抗振性测定

Explosives for civil uses - Detonators and relays - Part 8: Determination of the resistance to vibration of plain detonators; German version EN 13763-8:2003

民用炸药雷管和继电器第8部分：普通雷管抗振性的测定德文版 EN 13763-8:2003

Explosives for civil uses - Detonators and relays - Part 8: Determination of the resistance to vibration of plain detonators; German version EN 13763-8:2003 / Note: To be replaced by DIN EN 13763-8 (2021-06).

天然石材试验方法.抗盐雾老化的测定

Natural stone test methods - Determination of resistance to ageing by salt mist; German version EN 14147:2003

高压蒸气养护的加气混凝土的抗冻融性测定.德文版本EN 15304-2010

Determination of the freeze-thaw resistance of autoclaved aerated concrete; German version EN 15304:2010

蒸压加气混凝土抗冻融性能的测定

Determination of the freeze-thaw resistance of autoclaved aerated concrete; German version EN 15304:2010

电缆和光缆 非金属材料的试验方法

Electric and optical fibre cables – Test methods for non-metallic materials

致密成型耐火制品试验方法.第16部分:耐硫酸腐蚀性测定; 德文版本 EN 993-16:1995

Dense shaped refractory products - Methods of test - Part 16: Determination of resistance to sulphuric acid; German version EN 993-16:1995

纺织品 通过马丁代尔法测定织物的耐磨性 第3部分：质量损失的测定

Textiles – Determination of the abrasion resistance of fabrics by the Martindale method – Part 3: Determination of mass loss

纺织物.用马丁代尔法测定织物的耐磨性.第3部分:质量损耗测定

Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss (ISO 12947-3:1998+Cor. 1:2002)(includes Corrigendum AC:2006); English version of DIN EN ISO 12947-3:2007-04

技术产品文档 技术产品文档中使用的符号 比例和尺寸（草案）

Technical Product Documentation Symbol proportions and dimensions used in technical product documentation (draft)

搪瓷和瓷釉 耐化学腐蚀性的测定 第2部分：通过煮沸酸、沸腾中性液体、碱性液体和/或其蒸气测定耐化学腐蚀性

Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours (ISO 28706-2:2017); German v...

铝和铝合金的阳极氧化 浸入磷酸/铬酸溶液后质量损失测量法评定阳极氧化膜的封孔质量（草案）

Mass loss measurement method after anodizing of aluminum and aluminum alloys immersed in phosphoric acid/chromic acid solution to evaluate the sealing quality of anodized films (draft)

铝和铝合金的阳极氧化.浸入磷酸/铬酸溶液后质量损失测量法评定阳极氧化膜的封孔质量(ISO 3210-2010) 德文版本EN ISO 3210-2010

Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution (ISO 3210:2010); German version EN ISO 3210:2010

粉末涂料 第7部分：烘烤时质量损失的测定（草案）

Powder coatings Part 7: Determination of mass loss during baking (draft)

金属粉末.用还原法测定氧含量.第2部分:氢还原时的质量损失(氢损失)

Metallic powders - Determination of oxygen content by reduction methods - Part 2: Loss of mass on hydrogen reduction (hydrogen loss) (ISO 4491-2:1997)

生咖啡豆.测定105℃温度下的质量损失

Green coffee - Determination of loss in mass at 105 °C (ISO 6673:2003) English version of DIN ISO 6673:2007-03

生咖啡 - 在105℃时质量损失的测定

Green coffee - Determination of loss in mass at 105°C

玻璃.抗沸腾碱溶液腐蚀性.试验和分类方法

Glass; resistance to attack by a boiling aqueous solution of mixed alkali; method of test and classification; identical with ISO 695:1991

木材和木基制品的耐用性.木基面板.测定防止担子菌类毁坏木材的试验方法; 德文版本 ENV 12038:2002

Durability of wood and wood-based products - Wood-based panels - Method of test for determining the resistance against wood-destroying basidiomycetes; German version ENV 12038:2002

集料热性能和老化性能试验.第1部分:耐冻性和耐融性的测定

Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing

食品安全国家标准 食品接触用硅橡胶材料及制品

National Food Safety Standard: Silicon Rubber Materials and Products for Food Contact

粉末涂料.第7部分:烘烤时质量损失的测定法

Coating powders.Part 7:Determination of loss of mass on stoving

葡萄糖干燥失重测定

Dextrose.Determination of loss in mass on drying

质量成本核算与控制指南

Guidelines for Cost Accounting and Control of Quality

氧化铝化学分析方法和物理性能测定方法 第2部分：300 ℃和1000 ℃质量损失的测定

Chemical analysis methods and determination of physical performance of alumina—Part 2: Determination of loss of mass at 300 ℃ and 1000 ℃

合成橡胶.干燥时重量损失的测定法

The suntetic rubber. The method for the determination of the mass loss on dryinq

玻璃塘磁与陶瓷塘磁.对织物洗涤用的洗涤剂的热溶液作用的稳定性的测定

Vitreous and porcelain enamels. Determination of resistance to hot detergent solutions used for washing textiles

工业用硫磺.80鳦时的质量损失测定

Sulphur for industrial use. Determination of loss in mass at 80 °C

经烘焙的研磨咖啡. 103 ℃时测定质量损失的常规方法

Roasted ground coffee. Routine method for determination of loss in mass at 103° C

速溶咖啡. 70 ℃且降压条件下质量损失的测定

Instant coffee. Determination of loss in mass at 70 °C under reduced pressure

葡萄糖.干燥后质量损失的测定.真空烘箱法

Dextrose. Determination of loss in mass on drying. Vacuum oven method

一般用途的汽车道路 用于制备沥青混合料的矿物材料 体积功能设计系统 硫酸钠或硫酸镁作用下质量损失的测定方法

Automobile roads of general use. Mineral materials for preparing asphalt mixtures. Volumetric-functional design system. Method for determination of loss of mass under the action of sodium sulfate or magnesium sulfate

纺织材料 地板覆盖物和棉制品 质量损失、楼梯试验和纤维连接（桩）强度的测定方法

Textile materials. Floor coverings and goots. Methods for determination of the lostof mass, stairs trials and fibers connection (pile) strength

纺织品. 马丁代尔法织物耐磨性的测定. 第3部分. 质量损失的测定

Textiles. Determination of the abrasion resistance of fabrics by the Martindale method. Part 3. Determination of mass loss

速溶茶. 水分含量的测定 (103 °S时的质量损失)

Instant tea. Determination of moisture content (loss in mass at 103 °S)

电缆和光缆.非金属材料试验方法.第409部分:各类试验.热塑性绝缘鞘质量损失试验

Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths

马黛茶 103 ?C下质量损失的测定

Yerba mate. Determination of loss in mass at 103 ?C.

Té 103°C下质量损失的测定

Tea. Determination of loss in mass at 103 °C.

可溶性固体茶 103°C 下的质量损失测定

Instant tea in solid form. Determination of loss in mass at 103 ?C.

生产铝的原材料 氧化铝 300°C下的质量损失测定

Raw materials for aluminium production. Aluminium oxide. Determination of loss on heating at 300°C.

氧化铝生产用原料 氧化铝 1000°C和1200°C下的质量损失测定

Raw materials for aluminium production. Aluminium oxide. Determination of mass loss at 1000 °C and 1200 °C.

地毯及其他纺织覆盖物 耐磨性测试 采用 Lisson 行走轮评估

Textile Floor Coverings and Carpets. Abrasion Resistance Test. Evaluation with Lisson Walk Tester.

生咖啡.缺陷参考图

Green coffee - Defect reference chart

纺织品.用马丁代尔法测定织物耐磨性.第3部分：质量损失的测定

Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss

铺地织物 用Lisson试验对质量损失的测定

Textile floor coverings - Determination of mass loss using the Lisson test

铝及其合金的阳极氧化处理 通过测定在酸性溶液中浸渍后质量损失来评估封闭型阳极氧化涂层的质量

Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)

速溶咖啡 在70℃时减压下质量损失的测定

Instant coffee; Determination of loss in mass at 70 degrees C under reduced pressure

生咖啡豆.在105℃时质量损失的测定

Green coffee - Determination of loss in mass at 105 °C

生咖啡 105 °C下质量损失的测定

Green coffee — Determination of loss in mass at 105 °C

固体状速溶茶 水分含量(在103℃时质量损失)的测定

Instant tea in solid form; determination of moisture content (loss in mass at 103 °C)

固态速溶茶.含湿量测定(103℃条件下的质量损失).修改件1

Instant tea in solid form - Determination of moisture content (loss in mass at 103 °C); Amendment 1

涂层粉末 - 第7部分:烘烤时质量损失的测定

Coating powders — Part 7: Determination of loss of mass on stoving

石油沥青和沥青结合料 工业用沥青加热后质量损失测定

Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen

用于民用目的的炸药 起爆器和延期导爆索 第8部分 普通起爆器和起爆器半成品的耐振动性能检验

Explosives for civil uses - Detonators and detonating cord relays - Part 8: Verification of resistance to vibration of plain and semi-finished detonators

纺织品地板覆盖物 使用Lisson-Tretrad装置测定质量损失、纤维粘合和台阶边缘外观变化（ISO 12951:2020）

Textile floor coverings - Determination of mass loss, fibre bind and stair nosing appearance change using the Lisson Tretrad machine (ISO 12951:2020)

搪瓷和瓷釉 耐磨性测定 第2部分：表面下磨耗后的质量损失（ISO 6370-2:2020）

Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 2: Loss in mass after sub-surface abrasion (ISO 6370-2:2020)

热固性涂料 第7部分：热失重测定（ISO 8130-7:2019）

Coating powders - Part 7: Determination of loss of mass on stoving (ISO 8130-7:2019)

工业用氟硅酸钠 105 °C时的质量损失测定 (ISO 5444:1978 等同采用)

SODIUM HEXAFLUOROSILICATE FOR INDUSTRIAL USE - DETERMINATION OF LOSS IN MASS AT 105 °C (ISO 5444:1978, IDT)

超声空化腐蚀对UNS N10665镍基合金在海水中的影响

Effect of ultrasonic cavitation corrosion on UNS N10665 nickel-based alloy in seawater

混凝土裂缝宽度与钢筋腐蚀引起的质量损失之间的概率模型

Probabilistic model of the relationship between concrete crack width and mass loss caused by steel bar corrosion

生咖啡 缺陷参考图

Green coffee.Defect retect reference chart

石油沥青和沥青胶结材料 工业石油沥青加热后质量损失的测定

Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen

民用炸药 引爆器和引爆索继电器 第8部分：普通及半成品引爆器抗振动性能的验证

Explosives for civil uses — Detonators and detonating cord relays — Part 8: Verification of resistance to vibration of plain and semi-finished detonators

纺织品 用马丁代尔法测定织物耐磨性 第3部分：质量损失的测定（ISO 12947-3:1998）

Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss (ISO 12947-3:1998)

铝合金的阳极氧化及其合金的阳极氧化涂层密封质量评估 通过浸入酸溶液后测量质量损失（ISO 3210:2017）

Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (ISO 3210:2017)

玻璃和搪瓷 磨损抵抗力的测定 第2部分：次表面磨损后的质量损失（ISO 6370-2:2020）

Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 2: Loss in mass after sub-surface abrasion (ISO 6370-2:2020)

涂层粉末 第7部分：焙烧失重的测定（ISO 8130-7:2019）

Coating powders - Part 7: Determination of loss of mass on stoving (ISO 8130-7:2019)

金属和合金的腐蚀 从腐蚀试验样品中去除腐蚀产物（ISO 8407:2009）

Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens (ISO 8407:2009)

混凝土结构保护和修复用产品和系统 测试方法 冻融盐胁迫后疏水浸渍混凝土质量损失的测定

Products and systems for the protection and repair of concrete structures - Test method. Determination of loss of mass of hydrophobic impregnated concreted after freeze-thaw salt stress.

民用炸药 导爆索引爆器和导爆索继电器 第8部分：普通引爆器和半成品抗振动性能的验证（经西班牙标准化协会于2026年1月批准 ）

Explosives for civil uses - Detonators and detonating cord relays - Part 8: Verification of resistance to vibration of plain and semi-finished detonators (Endorsed by Asociación Espa?ola de Normalización in January of 2026.)

涂漆和相关产品前钢基材的准备 非金属喷砂清理磨料的试验方法 第5部分：水分的测定（ISO 11127-5:2011）

Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:2011)

粉末涂料 第7部分：烘干质量损失的测定

Coating powders - Part 7: Determination of loss of mass on stoving (ISO 8130-7:2019)

民用炸药 导爆管雷管和延期雷管 第8部分：简单或半成品雷管抗振动性能的验证

Explosives for civil uses - Detonators and detonating cord relays - Part 8: Verification of resistance to vibration of plain and semi-finished detonators