敏化是一种热处理过程,通常在不锈钢中促使碳化物在晶界析出,导致晶界区域铬含量降低,从而增加晶间腐蚀敏感性。奥氏体不锈钢在500°C至1300°C温度范围内,碳与铬结合形成碳化铬析出于晶界,导致晶界附近铬贫化,引发晶间腐蚀敏感性增加。
| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| AMPP Paper 16395-2021 试验 |
合金 UNS N08825 在不同轧机退火温度和时间后的抗敏化性能 Sensitization Resistance of Alloy UNS N08825 after different mill-annealing temperatures and times
晶间腐蚀 |
2021 材料保护与性能协会 |
| AMPP Paper 17524-2022 指南标准 |
A review of Chloride Stress Corrosion Cracking factors for Austenitic Stainless Steel
|
2025-01-05 材料保护与性能协会 |
| AMPP Paper 17619-2022 试验 |
Ni-Mo和Ni-Cr-Mo合金钢管在标准酸和其他环境中的耐蚀性性能 Corrosion resistance of Ni-Mo and Ni-Cr-Mo alloy steel pipes in standard acid and other environments
|
2022 材料保护与性能协会 |
| AMPP Paper 17650-2022 试验 |
耐蚀合金 |
2022 材料保护与性能协会 |
| AMPP Paper 17783-2022 试验标准 |
奥氏体不锈钢焊接美利体育官网首页网址在低pH环境中的腐蚀行为 Corrosion behavior of austenitic stainless steel welding equipment in low pH environment
点蚀 热影响区 |
2022 材料保护与性能协会 |
| AMPP Paper 17805-2022 试验 |
In-situ determination of the degree of sensitization in austenitic stainless steels by DL-EPR
|
2022 材料保护与性能协会 |
| AMPP Paper 17993-2022 试验 |
不使用苏打灰清洗 通过化学处理减轻连多硫酸应力腐蚀开裂:实验室和工厂经验 Chemical Treatment To Mitigate Polythionic Acid SCC Without A Soda-Ash Wash: Laboratory And Plant Experience
|
2025-01-05 材料保护与性能协会 |
| ASTM G108-94(2015) Test Method |
美利体育登录入口官网AISI304和304L型不锈钢增感作用的电化学再活化性 (EPR) 的标准试验方法 Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
|
1994 美国材料与试验协会 |
| ASTM G35-98(2015) Practice |
测定不锈钢和有关镍铬铁合金在连多硫酸中应力腐蚀断裂灵敏性的标准实施规程 Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids
|
1998 美国材料与试验协会 |
| AWS WSS-Q&A-2013 指南标准 |
AWS WSS-Q&A-2013
铁素体 |
2013-01-01 美国焊接协会 |
| CGA TB-30-2016 指南标准 |
Test method for evaluating surface coatings on refillable steel cylinders
|
2016 美国压缩气体协会 |
| DIN 18531-3:2010 试验标准 |
屋顶的防水.无用屋顶的密封件.第3部分:设计、材料搬运和密封 Waterproofing of roofs - Sealings for non-utilized roofs - Part 3: Design, handling of materials, execution of sealings
晶间腐蚀 |
2010-05 德国标准化学会 |
| DIN EN ISO 12732 -2008-07 试验 |
金属和合金的腐蚀-双环方法(基于?ihal方法)的电化学动力学再激活测量 Corrosion of metals and alloys – Electrochemical potentiokinetic reactivation measurement using the double loop method (based on ?ihal’s method)
晶间腐蚀 |
2008-07-01 德国标准化学会 |
| DIN ISO 3651-3:2018 试验标准 |
不锈钢抗晶间腐蚀的测定. 第3部分: 低铬铁素体不锈钢腐蚀试验(ISO 3651-3-2017) Determination of resistance to intergranular corrosion of stainless steels - Part 3: Corrosion test for low-Cr ferritic stainless steels (ISO 3651-3:2017)
晶间腐蚀 铁素体不锈钢 |
2018-09-00 德国标准化学会 |
| DIN ISO 3651-3:2018-09 试验 |
不锈钢耐晶间腐蚀性能测定 第3部分:低铬铁素体不锈钢腐蚀试验 Determination of resistance to intergranular corrosion of stainless steels — Part 3: Corrosion test for low-Cr ferritic stainless steels
晶间腐蚀 |
2018-09-01 德国标准化学会 |
| ISO 3651-1:1998 试验 |
不锈钢耐晶间腐蚀的测定 第1部分:奥氏体和铁素体奥氏体(二重)不锈钢 用失重测定法在硝酸介质中的腐蚀试验(Huey试验) Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
晶间腐蚀 |
1998-05 国际标准化组织 |
| NACE Paper 00185-1997 试验 |
钢种304、304L、321、321L和347不锈钢在不同敏化和稳定热处理后的间粒腐蚀抵抗力研究 Study on the intergranular corrosion resistance of 304, 304L, 321, 321L and 347 stainless steel after different sensitization and stabilization heat treatments
晶间腐蚀 |
1997 美国防腐工程师协会 |
| NACE Paper 00453-1999 试验 |
Effect of oxide modification on intergranular corrosion susceptibility and stress corrosion cracking of austenite in stainless steel
|
1999 美国防腐工程师协会 |
| NACE Paper 00592-1998 试验 |
Study on the factors affecting polysulfate stress corrosion cracking of 18-8 stainless steel
|
1998 美国防腐工程师协会 |
| NACE Paper 01527-2012 试验 |
Qualification Testing of Lean Duplex Stainless Steels for the Process Industry
|
2012-01-01 美国防腐工程师协会 |
| NACE Paper 07202-2007 |
Corrosion acceptance testing and its applicability
局部腐蚀 |
2007 美国防腐工程师协会 |
| NACE Paper 09037-2017 试验标准 |
双环电化学电位动反应法(DL-EPR)在美利体育登录入口官网UNSN06690敏感化中的优化 Optimization of double-loop electrochemical potentiodynamic reaction (DL-EPR) in the sensitization of UNSN06690
|
2017 美国防腐工程师协会 |
| NACE Paper 11243-2018 试验 |
Applicability of ASTM G28 testing
晶间腐蚀 热影响区 |
2018-01-01 美国防腐工程师协会 |
| NACE Paper 12729-2019 试验 |
UNS N08825钛稳定型完全奥氏体镍 铁 铬合金对钝化膜敏感性的影响 Effect of UNS N08825 titanium-stabilized fully austenitic nickel-iron-chromium alloy on the sensitivity of passive film
|
2019 美国防腐工程师协会 |
| NACE Paper 12783-2019 试验 |
Study on the Relationship between Stress Corrosion Cracking Resistance and Carbon Content of Polysulfide Acid
热影响区 |
2019 美国防腐工程师协会 |
| NACE Paper 12886-2019 规范/指南 |
CRA Failures in Refining Operations
耐蚀合金 |
2023-04-18 美国防腐工程师协会 |
| NACE Paper 13038-2019 试验 |
Sulfidation Corrosion of Alloy 800HT Coker Furnace Tubes
|
2019 美国防腐工程师协会 |
| NACE Paper 13421-2019 试验 |
Sensitization Behavior of UNS N10276 as a Function of Mu Phase Precipitation
|
2019 美国防腐工程师协会 |
| NACE Paper 14557-2020 规范 |
Ni-Cr-Mo alloy UNS N06058
|
2020 美国防腐工程师协会 |
| NACE Paper 14830-2020 试验 |
Substitution sensitization test method for austenitic stainless steel for non-magnetic drill pipe
晶间腐蚀 |
2020 美国防腐工程师协会 |
| NACE SP0170-2018 规范 |
Protection of Austenitic Stainless Steels and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking During a Shutdown of Refinery Equipment
|
2018-09-10 美国防腐工程师协会 |
| SAE AIR844B-2014 指南标准 |
Sensitization and Corrosion in Stainless Steel Filters
晶间腐蚀 点蚀 |
2014-02-06 美国机动车工程师协会 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号
页面更新时间: 2026-09-08 07:14