生产批是指同一炉次材料按同一规范制造、同一热处理条件连续处理的同一型式和规格的成品零件的数量。例如，使用相同工艺、单一材料熔炼（同一炉合金）、相同基本零件号和直径、在相同热处理条件下热处理并连续生产的一批已加工零件。对于紧固件，相同标识（包括精度等级、强度等级和尺寸）的紧固件数量，由同一炉次的棒材、线材、杆材或扁平材料制成，采用相同或类似的工艺，同时或连续进行，并具有相同的热处理和/或表面处理工艺。
| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| BS A 363:2000 规范 |
Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa - Procurement specification
MJ 螺纹螺栓 |
2000-04-15 英国标准学会 |
| BS EN 3050:2025 规范标准 |
Aerospace series?— O-rings, in fluorocarbon rubber (FKM), low compression set?— Technical specification
O形圈 氟碳橡胶 |
2026-01-31 英国标准学会 |
| DB13/T 2688-2018 规范 |
General technical requirements for polyoxymethylene filaments for industrial use
|
2018-03-13 河北省标准 |
| DB61/T 1250-2019 规范 |
General Specification for Sic (Silicon Carbide) Material Semiconductor Discrete Devices
半导体分立器件 |
2019-06-25 陕西省标准 |
| DIN 29971:1991 规范 |
Aerospace; unidirectional carbon fibre-epoxy sheet and tape prepreg; technical specification
质量检验 |
1991-09 德国标准化学会 |
| DIN 65013:2012 规范 |
航空航天系列.标称抗拉强度1800 MPa,超强度钢制和镍钴基合金螺栓.技术规格 Aerospace series - Bolts in ultra high strength steels and Ni-Co-based alloys, nominal tensile strength 1 800 MPa - Technical specification
|
2012-09-01 德国标准化学会 |
| DIN EN 10132-1:2000 规范 |
Cold-rolled narrow steel strip for heat-treatment - Technical delivery conditions - Part 1: General; German version EN 10132-1:2000
冷轧窄钢带 |
2000-05 德国标准化学会 |
| DIN EN 1715-1:2008-07 规范 |
Aluminium and aluminium alloys - Drawing stock - Part 1: General requirements and technical conditions for inspection and delivery; German version EN 1715-1:2008
|
2008-07 德国标准化学会 |
| DIN EN 3388:2009-07 规范 |
航空航天系列 外螺纹紧固件 耐热镍基合金 NI-PH2601(Inconel 718)分类：1275 MPa/650°C 制造方法可选 技术规范 Aerospace series - Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 275 MPa/650 °C - Manufacturing method optional - Technical specification; German and English version EN 3388:2009
外螺纹紧固件 |
2009-07 德国标准化学会 |
| DIN EN 3389:2009 规范 |
航空航天系列.NI-PH1302(沃斯帕洛伊合金)型耐热镍基合金外螺纹紧固件.等级:1210MPa/730℃.可选制造法.技术规范 Aerospace series - Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH1302 (Waspaloy) - Classification: 1 210 MPa/730 °C - Manufacturing method optional - Technical specification; German and English version EN 3389:2009
|
2009-06 德国标准化学会 |
| DIN EN 3685:2008 规范 |
航空航天系列.FE-PA2601(A286)型耐热钢制螺栓.等级:1100MPa/650℃.技术规范 Aerospace series - Bolts in heat resisting steel FE-PA2601 (A286) - Classification: 1100 MPa/650 °C - Technical specification; German and English version EN 3685:2008
|
2008-12 德国标准化学会 |
| DIN EN 61747-3:2007-03 试验 |
Liquid crystal display devices - Part 3: Liquid crystal display (LCD) cells - Sectional specification (IEC 61747-3:2006); German version EN 61747-3:2006 / Note: DIN EN 61747-3 (2000-07) remains valid alongside this standard until 2009-09-01.*To be repl...
生产线 |
2007-03 德国标准化学会 |
| DIN EN ISO 4074 E:2015-04 规范 |
Requirements and test methods for natural latex male condoms (draft)
保质期 |
2015-04 德国标准化学会 |
| EN 10132-1:2000 规范 |
Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 1: General
冷轧窄钢带 |
2000-02-01 欧洲标准化委员会 |
| FZ/T 51003-2011 规范 |
Cationc dyeable polyester chip
|
2011-05-18 行业标准-纺织 |
| FZ/T 52012-2011 规范 |
Chitosan staple fibers
壳聚糖纤维 |
2011-05-18 行业标准-纺织 |
| FZ/T 52013-2011 规范 |
Inorganic flame retardant viscose staple fiber
|
2011-05-18 行业标准-纺织 |
| FZ/T 52014-2011 规范 |
Bamboo charcoal viscose staple fiber
|
2011-05-18 行业标准-纺织 |
| FZ/T 52016-2011 规范 |
Poly(diphenyl sulfone-terephthalamide)staple fiber
|
2011-12-20 行业标准-纺织 |
| FZ/T 52017-2011 试验 |
Polyphenylene Sulfide Staple fiber
|
2011-12-20 行业标准-纺织 |
| FZ/T 54013-2019 规范 |
Nylon 66 Industrial Filament
|
2019-05-02 行业标准-纺织 |
| FZ/T 54014-2009 规范 |
Polyamide 66 draw textured yarn
|
2010-01-20 行业标准-纺织 |
| FZ/T 54018-2009 规范 |
Super-fine polyester drawn textured yarns
|
2010-01-20 行业标准-纺织 |
| FZ/T 54021-2009 规范 |
Polytrimethylene terephthalate partially oriented yarns
|
2010-01-20 行业标准-纺织 |
| FZ/T 54023-2009 规范 |
Polyamide 66 industrial filament yarns for air bag
|
2010-01-20 行业标准-纺织 |
| FZ/T 54024-2019 规范 |
Nylon 6 pre-oriented yarn
|
2019-05-02 行业标准-纺织 |
| FZ/T 54025-2009 规范 |
Polyamide 66 pre-oriented yarn
|
2010-01-20 行业标准-纺织 |
| FZ/T 54028-2010 规范 |
Protein viscose staple fiber
|
2010-12-29 行业标准-纺织 |
| FZ/T 54029-2010 试验 |
Protein viscose filament yarns
|
2010-12-29 行业标准-纺织 |
| FZ/T 54031-2010 规范 |
Dope-dyed viscose filament yarns
|
2010-12-29 行业标准-纺织 |
| FZ/T 54032-2010 规范 |
High whiteness purified viscose staple fiber
|
2010-12-29 行业标准-纺织 |
| FZ/T 54034-2010 规范 |
Antibacterial polyamide pre-oriented yarns
|
2010-12-29 行业标准-纺织 |
| FZ/T 54036-2011 试验 |
High elongation and heat resistance polyamide/cotton core-spun yarn
|
2011-05-18 行业标准-纺织 |
| FZ/T 54037-2011 规范 |
Cationic dyeable polyester drawn yarns
|
2011-05-18 行业标准-纺织 |
| FZ/T 54039-2011 规范 |
Bright profiled polyester drawn yarns
|
2011-05-18 行业标准-纺织 |
| FZ/T 54042-2011 规范 |
Conductive polyester drawn yarn
|
2011-12-20 行业标准-纺织 |
| FZ/T 54044-2011 规范 |
Nylon 6 filament yarns for industry
|
2011-12-20 行业标准-纺织 |
| FZ/T 54048-2012 规范 |
Regenerated polyester drawn yarns
|
2012-05-24 行业标准-纺织 |
| FZ/T 54049-2012 规范 |
Sea-island polyester drawn textured yarn
|
2012-05-24 行业标准-纺织 |
| FZ/T 54050-2012 规范 |
Sea-island polyester drawn yarns
|
2012-05-24 行业标准-纺织 |
| GB/T 39376-2020 规范 |
Leather—Sampling—Number of items for a gross sample
|
2020-11-19 国家市场监督管理总局 |
| GJB 4027-2000 试验标准 |
Destructive physical analysis method of military electronic components
电子元器件 破坏性物理分析 |
2000-04-24 国家军用标准-总装备部 |
| GJB 4027A-2006 试验 |
Methods of destructive physical analysis for military electronic components
破坏性物理分析 |
2006-10-20 国家军用标准-总装备部 |
| GJB 5914-2006 试验 |
Methodsof destructive physical analysis for military semiconductor devices of all kinds of quality class
破坏性物理分析 |
2006-12-15 国家军用标准-国防科工委 |
| GJB 7243-2011 试验 |
Screening technical requirement for military electronic components
筛选 |
2011-01-20 国家军用标准-总装备部 |
| GOST R ISO 16426-2009 规范 |
Fasteners. Quality assurance system
|
2009 俄罗斯标准局 |
| IEC 61747-2:2015 试验 |
Liquid crystal display devices - Part 2: Liquid crystal display modules - Sectional specification
液晶显示模块 |
2015-04 国际电工委员会 |
| IEC 61747-3:2006 规范 |
Liquid crystal display devices - Part 3: Liquid crystal display (LCD) cells - Sectional specification
液晶显示单元 |
2006-08 国际电工委员会 |
| ISO 10684:2004 规范 |
Fasteners - Hot dip galvanized coatings
热浸镀锌 |
2004-07 国际标准化组织 |
| ISO 24408:2005 试验 |
船舶和海上技术.救生器具用定位指示灯.制造美利体育官网首页网址的试验、检查和标记 Ships and marine technology - Position-indicating lights for life-saving appliances - Testing, inspection and marking of production units
环境试验 |
2005-11 国际标准化组织 |
| ISO 5858:2026 规范 |
航空航天 最高工作温度小于或等于425°C的自锁螺母 采购规范 Aerospace — Nuts, self-locking, with maximum operating temperature less than or equal to 425 °C — Procurement specification
自锁扭矩 |
2026-05-21 国际标准化组织 |
| LST EN 3050:2026 |
航空航天系列 氟橡胶（FKM）O 形圈 低压缩永久变形 技术规范 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification
O形圈 氟碳橡胶 |
2026-01-15 立陶宛标准局 |
| NF EN 3050:2026 |
航空航天系列 氟橡胶 (FKM) O 型圈 低压缩永久变形 技术规格 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification
O形圈 氟碳橡胶 |
2026-01-01 法国标准化协会 |
| QJ 2602-1994 规范 |
Technical conditions for MJ thread 1100MPa titanium alloy bolts
检查批 |
1994-04-27 行业标准-航天 |
| QJ 3179-2003 规范 |
Management requirements for destructive physical analysis of components
|
2003 行业标准-航天 |
| SJ/T 11461.3-2016 规范 |
Organic light-emitting diode display devices Part 3: Sub-specification for display screens
显示屏 生产线 |
2016-01-15 行业标准-电子 |
| SN/T 1534-2005 试验规范 |
Rule of inspection of doorlocks with dead bolt for export
|
2005-02-17 行业标准-出入境检验检疫 |
| SN/T 2803-2011 规程 |
Rule for inspection of fruit and vegetable juice(puree) for import and export
无菌包装 |
2011-02-25 行业标准-出入境检验检疫 |
| SN/T 4135-2015 规程 |
Rules for the inspection of roasted food for export
|
2015-02-09 行业标准-出入境检验检疫 |
| SS-EN 10132-1:2000 规范 |
Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 1: General
交货条件 冷轧窄钢带 |
2000 瑞典标准研究所 |
| UNE-EN 3050:2025 |
航天系列 氟碳橡胶（FKM）O型圈 低压缩变形 技术规格（2026年2月由西班牙标准化协会批准） Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification (Endorsed by Asociación Espa?ola de Normalización in February of 2026.)
O形圈 氟碳橡胶 |
2026-02-01 西班牙标准化协会 |
| UNI EN 3050:2026 |
航天系列 扭环形（O型圈）密封件 采用氟碳橡胶（FKM）材质 压缩后具有轻微的永久变形 技术规范 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification
O形圈 氟碳橡胶 |
2026-01-29 意大利统一标准化组织 |
| YY/T 0513.1-2019 规范 |
Allogeneic bone grafts.Part 1:The basic requirements for bone bank
供体 |
2019-10-23 行业标准-医药 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证：京ICP证110310号
页面更新时间: 2026-09-05 14:21