美利体育登录入口官网

航空航天系列 管接头 24° 锥体 压力高达 35 000 kPa (5 080 psi) 环锁接头 不耀眼的结局 英制系列 超细牙螺纹

Aerospace series. Pipe coupling 24° Cone up to 35 000 kPa (5 080 psi) Ring-locked fitting. Flareless End. Inch Series. Extra Fine Thread Pitch

水质 - 基于验证和质量控制数据的测量不确定度估计（ISO 11352:2012）

Water quality - Estimation of measurement uncertainty based on validation and quality control data (ISO 11352:2012)

航空航天.耐腐蚀钢制带环锁和MJ螺纹的螺钉锁紧的丝套.等级:900 MPa/1100MPa/1250 MPa/1550 MPa/315鳦/425鳦

Aerospace - Thread inserts, with MJ thread, ring locked, screw-locking, corrosion-resisting steel; Classification: 900 MPa/1100 MPa/1250 MPa/1550 MPa/315 °C/425 °C

航空航天 带MJ螺纹,锁环的钛合金双头螺钉 温度高至315℃,标称抗拉强度1,100 MPa

Aerospace - Studs with MJ thread, ring locked, titanium alloy - Nominal tensile strength 1100 MPa, for temperatures up to 315 C

航空航天系列 管道接头 60° 球形 钛合金 TI-P64001 适配器 直型 双端 带锁紧环

Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001, adapters, straight, double end, with locking ring; German and English version EN 4510:2018

航空航天系列 环锁接头和减速器的安装和拆卸要求 24 锥体 压力高达 35 000 kPa (5 080 psi) 英制系列（草案）

Aerospace series - Installation and removal requirements for Ring locked fitting and reducer, 24 Cone up to 35 000 kPa (5 080 psi) - Inch Series

航空航天系列 - 环锁接头和减速器的安装和拆卸要求，24 锥体，压力高达 35 000 kPa (5 080 psi) - 英制系列

Aerospace series - Installation and removal requirements for Ring locked fitting and reducer, 24？ Cone up to 35 000 kPa (5 080 psi) - Inch Series; German and English version EN 4835:2018

航空航天系列 环锁接头和异径管的安装和拆卸要求 24°锥体压力高达 35000kPa(5080psi)英制系列

Aerospace series - Installation and removal requirements for Ring locked fitting and reducer, 24° Cone up to 35 000 kPa (5 080 psi) - Inch Series; German and English version EN 4835:2018

钩型锁（拉、剪、弯）综合承力锁环

Hook lock (pull, cut, bend) comprehensive bearing lock ring

盲头铆钉 机械锁紧圆柱体 凸起类型A 1级 代码M

Blind rivets mechanical locking cylindrical boss type A grade 1 code M

螺柱，锁定在 环，直，安装和拆卸

Stud, Locked in - Ring, Straight, Installation and Removal of

螺柱 直型、锁环、耐腐蚀和耐热钢（UNS S66286），.2500-20 UNJC-3A X .2500-28 UNJF-3A

STUD - STRAIGHT, RING LOCKED, CORROSION AND HEAT RESISTANT STEEL (UNS S66286), .2500-20 UNJC-3A X .2500-28 UNJF-3A

螺柱 直型、锁环、耐腐蚀和耐热钢（UNS S66286），.3125-18 UNJC X .3125-24 UNJF

STUD - STRAIGHT, RING LOCKED, CORROSION AND HEAT RESISTANT STEEL (UNS S66286), .3125-18 UNJC X .3125-24 UNJF

螺柱 直型、锁环、耐腐蚀和耐热钢（UNS SS66286），.3750-16 UNJC X .3750-24 UNJF

STUD - STRAIGHT, RING LOCKED, CORROSION AND HEAT RESISTANT STEEL (UNS SS66286), .3750-16 UNJC X .3750-24 UNJF

Adapter Assembly 端口连接环锁定到无扩口管端

Adapter@ Assembly - Port Connection Ring Locked to Flareless Tube End

插头、端口连接、环形锁定、AS1300端口、安装与拆卸（稳定版：2025年10月）

Plugs, Port Connection, Ring Locked, AS1300 Port, Installation and Removal of (Stabilized: Oct 2025)

锯齿形高强度锁紧环

RING, LOCK, SERRATED-HIGH STRENGTH

适配器减速器、梁密封件 端口连接、环锁设计、安装和拆卸（稳定版：2026 年 2 月）

Adapter Reducer, Beam Seal - Port Connection, Ring Locked Design, Installation and Removal of (Stabilized: Feb 2026)

关路环的维修程序及服务注意事项

Off-Road Rim Maintenance Procedures and Service Precautions

接头组件 适配器环锁定端口连接到 8 度 30' 梁密封 28 000 kPa 公制

Fitting Assembly@ Adapter Ring Locked Port Connection to 8 Degrees 30' Beam Seal 28 000 kPa@ Metric

适配器 端口连接环锁定到 24° 锥形接头

ADAPTER - PORT CONNECTION RING LOCKED TO 24° CONE FITTING

适配器-端口连接 环锁安装和拆卸

Adapter - Port Connection@ Ring Locked Installation and Removal of

城市自行车用电子智能锁

Electronic intelligent lock of urban bicycle