美利体育登录入口官网

使用弯曲梁流变仪测定沥青结合料弯曲蠕变刚度的标准试验方法

Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)

度量衡平台．花岗岩

Surface plates for metrology - Granite

制造磁导线用方形和矩形软裸铜线及铝线硬度的标准试验方法

Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication

木电杆准静态试验的标准试验方法

Standard Test Methods of Static Tests of Wood Poles

织物硬度的标准试验方法

Standard Test Method for Stiffness of Fabrics

聚烯烃薄膜及薄板硬度的标准试验方法

Standard Test Method for Rigidity of Polyolefin Film and Sheeting

纸和纸板耐弯曲性的标准试验方法(GURLEY型试验机)

Standard Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester)

测定草皮加筋垫 (TRM) 使用土工合成材料刚度的标准试验方法

Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)

使用弯曲波束流变仪（BBR）测定沥青粘合剂的弯曲蠕变刚度的标准测试方法

Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)

用电动机械法测量土壤和土壤集料实体的硬挺度和表观模数的标准试验方法

Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by an Electro-Mechanical Method

用电动机械法测量土壤和土壤集料实体的硬挺度和表观模数的标准试验方法

Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method

聚氯乙烯 (PVC) 墙板相对刚度的标准试验方法

Standard Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding

建筑物框架地板或屋顶隔板结构静载试验的标准试验方法

Standard Test Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings

椎间体融合美利体育官网首页网址的试验方法

Test Methods For Intervertebral Body Fusion Devices

椎间盘外单节段脊柱植入物静态、动态和磨损评估标准测试方法

Standard Test Method for Static, Dynamic, and Wear Assessment of Extra-Discal Single Level Spinal Constructs

足部装备和足部材料测试方法 第4部分：其他部件 第4.18章 钢托的纵向刚性

Methods of test for Footwear and footwear materials Part 4: Other components Section 4.18 Longitudinal stiffness of steel shanks

分级压缩袜规范

Specification for Graduated compression hosiery

人造运动表面 第1部分：分类和概述

Artificial sports surfaces — Part 1 : Classification and general introduction

弹力护腿长筒袜规格

Specification for non-prescriptive graduated support hosiery

栅栏用钢丝和钢丝制品. 栅栏用钢丝焊接板

Steel wire and wire products for fencing and netting. Steel wire welded panels for fencing

体操美利体育官网首页网址.单杠.安全要求和试验方法

Gymnastic equipment - Horizontal bars - Safety requirements and test methods

木结构 特征值的计算和验证

Timber structures. Calculation and verification of characteristic values

木结构.连接器.要求

Timber structures - Connectors - Requirements

铁路应用 基础设施 道碴垫下

Railway applications. Infrastructure. Under ballast mats

通信电缆.试验方法规范.机械试验方法.弯曲试验

Communication cables - Specifications for test methods - Mechanical test methods - Bending tests

橡胶和塑料软管和管材 柔韧性和刚度的测量 低于环境温度的弯曲测试

Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at sub-ambient temperatures

纺织玻璃 粗纱挺度的测定

Textile glass. Determination of stiffness of rovings

橡胶 使用硫化仪测定硫化特性 引言

Rubber. Measurement of vulcanization characteristics using curemeters - Introduction

栅栏用钢丝和钢丝制品. 第7部分:栅栏用钢丝焊接板; 德文版本EN 10223-7-2012

Steel wire and wire products for fencing and netting.Part 7: Steel wire welded panels for fencing; German version EN 10223-7:2012

栅栏和网用钢丝及钢丝制品第7部分：栅栏用钢丝焊接板

Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing; German version EN 10223-7:2012

沥青混合料 试验方法 第26部分：刚度

Bituminous mixtures - Test methods - Part 26: Stiffness; German and English version EN 12697-26:2018/prA1:2022

沥青混合物.热混沥青的试验方法.第26部分:硬挺度

Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness; German version EN 12697-26:2012

沥青混合料 试验方法 第26部分：刚度

Bituminous mixtures - Test methods - Part 26: Stiffness

轨道交通.铁道.紧固系统试验方法.第9部分:刚度测定.德文版 EN 13146-9-2009+A1-2011

Railway applications - Track - Test methods for fastening systems - Part 9: Determination of stiffness; German version EN 13146-9:2009+A1:2011

铁路应用 轨道 紧固系统的测试方法 第9部分：刚度的测定

Railway applications - Track - Test methods for fastening systems - Part 9: Determination of stiffness

铁路应用 轨道 紧固系统的试验方法 第9部分：刚度的测定

Railway applications - Track - Test methods for fastening systems - Part 9: Determination of stiffness; German version EN 13146-9:2020

轨道交通 基础设施 道碴层下（草案）

Railway applications - Infrastructure - Under ballast mats

航空航天系列-电气和光学连接元件

Aerospace series - Elements of electrical and optical connection; Test methods - Part 419: Stability of male contacts in insert; German and English version EN 2591-419:2001 / Note: Applies in conjunction with DIN EN 2591-100 (2006-08).

通信电缆.试验方法规范.第3-9部分:机械试验方法.弯曲试验; 德文版本 EN 50289-3-9:2001

Communication cables - Specifications for test methods - Part 3-9: Mechanical test methods; Bending tests; German version EN 50289-3-9:2001

通信电缆-测试方法规范-第3-9部分：机械测试方法

Communication cables - Specifications for test methods - Part 3-9: Mechanical test methods; Bending tests; German version EN 50289-3-9:2001 / Note: Applies in conjunction with DIN EN 50289-3-1 (2002-05).

橡胶和塑料软管和管材.曲挠性和刚性的测量.第1部分:在环境温度下的弯曲试验(ISO 10619-1-2011).德文版本 EN ISO 10619-1-2011

Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2011); German version EN ISO 10619-1:2011

橡胶和塑料软管和管材 柔韧性和刚度的测量 第2部分：低于环境温度下的弯曲试验（草案）

Measurement of flexibility and stiffness of rubber and plastic hoses and pipes Part 2: Bend test at sub-ambient temperatures (draft)

橡胶和塑料软管和管材 柔韧性和刚度的测量 第2部分：低于环境温度下的弯曲试验（草案）

Measurement of flexibility and stiffness of rubber and plastic hoses and pipes Part 2: Bend test at sub-ambient temperatures (draft)

橡胶和塑料软管和管材.曲挠性和刚性的测量.第2部分:低于环境温度的弯曲试验(ISO 10619-2-2011).德文版本 EN ISO 10619-2-2011

Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2011); German version EN ISO 10619-2:2011

橡胶和塑料软管和管材 柔韧性和刚度的测量 第2部分：低于环境温度下的弯曲试验（ISO 10619-2:2017）

Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2017)

橡胶和塑料软管和管材.曲挠性和刚性的测量.第3部分:高温和低温下的弯曲试验(ISO 10619-3-2011).德文版本 EN ISO 10619-3-2011

Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011); German version EN ISO 10619-3:2011

橡胶和塑料软管和管材 柔性和刚度的测量 第3部分：高温和低温下的弯曲试验

Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011); German version EN ISO 10619-3:2011

托盘连接件的检验方法.第3部分:托盘连接件的强度测定

Methods of test for pallet joints - Part 3: Determination of strength of pallet joints (ISO 12777-3:2002); German version EN ISO 12777-3:2002

鞋类整鞋跟部固定测试方法

Test method for fixing the entire heel of footwear

金属材料. 静态单轴压缩试验机的验证. 第1部分: 拉伸/压缩试验机. 测力系统的验证与校准. 补充件2: 弹簧试验机的要求、验证和校准一般规则

Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system - Supplement 2: General for requirements, verification and calibration of spr

货物运输托盘平托盘 第1部分：测试方法

Pallets for the transport of goods – Flat pallets – Part 1: Test methods

医疗器械用不锈钢针状管材

Stainless steel needle tubing for manufacture of medical devices (ISO 9626:1991 + AMD 1:2001) (including amendment A1:2001); German version EN ISO 9626:1995 + A1:2001

压制工具 矩形截面压缩弹簧 外壳尺寸和颜色编码

Tools for pressing - Compression springs with rectangular section - Housing dimensions and colour coding (ISO 10243:2019)

半闭式压力机

Semi-straight side press

机器人用摆线针轮行星齿轮传动装置 通用技术条件

Precision cycloidal pin planetary gear transmission for robot—General technical requirements

无人机强度和刚度规范 第1部分：总则

Specification for unmanned aerial vehicles strength and rigidity Part 1: General specification

无人机强度和刚度规范 第5部分：其它载荷

Specification for unmanned aerial vehicles strength and rigidity. Part 5: Miscellaneous loads

纺织材料.折叠时刚性测定法

Textiles. Cloth. Methods for determination of resistance to blend

变性木材.衬套刚性测定法

Modified wood. Method for determination of rigidity of bushes

运动滑雪板.试验方法

Cross country skis. Test methods

圆形和矩形电磁工作台 一般技术条件

Circular and rectangular electromagnetic chucks. General specifications

模板.试验方法

Formworks. Test methods

人造革和薄膜. 灵活性, 硬度和弹性的测定方法

Artificial leather and films. Methods for determination of flexibility, hardness and elasticity

聚合物复合材料 开孔样品疲劳试验方法

Polymer composites. Test method for fatigue of samples with open hole

飞机操纵系统强度、刚度设计指南

Design guidelines for strength and stiffness of aircraft control systems

同轴通信电缆.第1-314部分:机械试验方法.弯曲试验

Coaxial communication cables - Part 1-314: Mechanical test methods - Test for bending

音响系统美利体育官网首页网址.声电变换器.大信号参数的测定

Sound system equipment - Electroacoustic transducers - Measurement of large signal parameters

橡胶,塑料软管和管材.曲挠性和刚性的测量.第2部分:低于环境温度的弯曲试验

Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures

电阻焊接.焊点破坏性试验.多点焊接样品的疲劳试验方法

Resistance welding - Destructive testing of welds - Method for the fatigue testing of multi-spot-welded specimens

铁路基础设施.轨道固定系统.第2部分：纵向轨道约束的试验方法

Railway infrastructure - Rail fastening systems - Part 2: Test method for longitudinal rail restraint

起重机.硬挺度.桥式起重机和龙门起重机

Cranes - Stiffness - Bridge and gantry cranes

纺织玻璃纤维.粗纱硬挺度的测定

Textile glass - Determination of stiffness of rovings

横向稳定杆 技术条件 第1部分:商用车横向稳定杆

Stabilizer bar.Technical specifications.Part1: Stabilizer bar for commercial

起重机.硬挺度.桥式起重机和龙门起重机

Cranes -- Stiffness -- Bridge and gantry cranes

用悬臂梁法测定塑料硬挺度的试验方法

Testing method for stiffness of plastics by means of a cantilever beam

纸张.硬挺度的测定.克拉克硬挺度测定仪方法

Paper -- Determination of stiffness -- Clark stiffness tester method

公路与铁路两用桥梁通用技术要求

General technical requirements for road and railway bridges

橡胶和塑料软管和管道 柔韧性和刚性测定 第1部分：环境温度下的弯曲试验 (ISO 10619-1:2017)

Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017)

橡胶 使用硫化仪测定硫化特性 第1部分：引言

Rubber - Measurement of vulcanization characteristics using curemeters - Part 1 : introduction

家具表面硬质覆面材料剥离强度的测定

Determination of peel strength of rigid overlaid materials in furniture surface

运动垫 第3部分：柔道垫 安全要求

Sports mats - Part 3: Judo mats, safety requirements

沥青混合料 热拌沥青混合料的试验方法 第26部分：硬度

Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness

鞋类 整鞋试验方法 鞋跟附着力

Footwear - Test methods for whole shoe - Heel attachment

铁路应用 基础设施 道砟板下

Railway applications - Infrastructure - Under ballast mats

橡胶和塑料软管及管材 柔韧性和刚性测定 第2部分：低于室温弯曲试验（ISO 10619-2:2021）

Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021)

起重机 刚性 桥式和门式起重机（ISO 22986:2007 等同采用）

Cranes - Stiffness - Bridge and gantry cranes (ISO 22986:2007, IDT)

纺织玻璃 纤线柔度的测定（ISO 3375:2009 等同）

Textile glass - Determination of stiffness of rovings (ISO 3375:2009, IDT)

橡胶和塑料软管 亚环境温度柔性试验

Rubber and plastics hoses - Sub-ambient temperature flexibility tests

橡胶 使用硫化仪测定硫化特性 第1部分：引言（ISO 6502-1:2024）

Rubber — Measurement of vulcanization characteristics using curemeters — Part 1: Introduction (ISO 6502-1:2024)

机车车辆制动机弹簧技术条件

Specifications for rolling stock brake springs

栅栏和网用钢丝和钢丝制品 第7部分：栅栏用钢丝焊接板

Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing