美利体育登录入口官网

资格评定后安装粘结锚固件在混凝土中的应用（ACI 355.4-19）及注释

Application of Post-Qualification Bonded Anchors in Concrete (ACI 355.4-19) and Commentary

木材 实心 结构用途的应力分级 分级方法的资格

Qualification of stress classification classification methods for solid structural uses of timber

结构木材的表征 特征值的测定

Determination of characteristic values of structural wood

结构木材的表征 特征值的测定

Determination of characteristic values of structural wood

木材．耐压级．刚强度分级评估

Timber - Stress-graded - In-grade strength and stiffness evaluation

通过全尺寸试样的级内试验确定视觉分级尺寸木材允许性能的标准规程

Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens

用基于力学模式的增强胶合层压木材(胶合层木)梁建立特性值的标准实施规程

Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models

土木工程结构用聚合物复合材料材料性能特征值评估的标准实施规程

Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications

用足尺试验对胶合木结构的弯曲特性建立特性值的标准实施规程

Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing

用足尺试验对胶合木结构的弯曲特性建立特性值的标准实施规程

Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing

波特兰水泥规范

Specification for Portland cement

混凝土配筋用钢筋网.规范

Steel fabric for the reinforcement of concrete - Specification

混凝土加固用钢织物 — 规范

Steel fabric for the reinforcement of concrete — Specification

与波特兰水泥一起使用的磨细粒状高炉矿渣规范

Specification for Ground granulated blastfurnace slag for use with Portland cement

木基镶板.5%特征值和平均特征值的测定

Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values

木结构 胶合层压木材 强度等级和特性值的测定

Timber structures - Glued laminated timber - Strength classes and determination of characteristic values

木基板.结构设计的特性值.OSB，刨花板和壁炉遮板

Wood-based panels - Characteristic values for structural design - OSB, particleboards and fireboards

基于木材的板材 结构设计的特征值 OSB、刨花板和纤维板

Wood-based panels. Characteristic values for structural design - OSB, particleboards and fibreboards

木质板材.结构设计特性值.层压板

Wood-based panels. Characteristic values for structural design. Plywood

木质板材 结构设计的特征值 胶合板

Wood-based panels. Characteristic values for structural design - Plywood

木结构.架空线用木杆

Structural timber. Wood poles for overhead lines

胶合板.一些机械特性的的计算方法

Plywood. Calculation method for some mechanical properties

建筑木材.5%特征值计算和样品的验收标准

Timber structures — Calculation of characteristic 5-percentile values and acceptance criteria for a sample

木结构 特征值的计算和验证

Timber structures. Calculation and verification of characteristic values

混凝土、灰泥和薄泥浆中用粒状喷沙炉矿渣.定义、规范和合格标准

Ground granulated blast furnace slag for use in concrete, mortar and grout - Definitions, specifications and conformity criteria

非结构用途的液压粘合料.定义,规范和合格标准

Hydraulic binder for non-structural applications. Definition, specifications and conformity criteria

结构木材 力量课程

Structural timber. Strength classes

用于混凝土加固和预应力的钢材 钢筋和线材认证计划

Steels for the reinforcement and prestressing of concrete. Certification scheme for steel bars and wires

地面气象资料基础产品技术规范

Technical Specifications for Surface Meteorological Data Basic Products

振荡和振动系统的机械振动.第3部分:带有限自由度不随时间变化的线性振动系统

(Mechanical) vibration, oscillation and vibration systems - Part 3: Linear time-invariant vibration systems with a finite number of degrees of freedom

（机械）振动、振荡和振动系统 第3部分：具有有限自由度的线性时不变振动系统

(Mechanical) vibration, oscillation and vibration systems - Part 3: Linear time-invariant vibration systems with a finite number of degrees of freedom

微缩照相用试验图表. 第2部分: 以分辨为目的的可读性试验和试验表用印刷字符的基本组合

Test charts for micrography.Part 2: Fundamental assembly of typographical characters for legibility tests and test chart for destination of resolving power

土壤.浅基础下土壤设计承载力的计算.计算实例

Soil - Calculation of design bearing capacity of soil beneath shallow foundations - Calculation examples

统计评定.第1部分:连续特征

Statistical evaluation - Part 1: Continuous characteristics

人造板机械性能和密度特征值的测定

Wood-based panels — Determination of characteristic values of mechanical properties and density

木基板材.特征5-百分位数值和特征均值的测定

Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values; German version EN 1058:2009

人造板 特征 5 百分位值和特征平均值的测定

Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values; German version EN 1058:2009

胶合板结构胶合板弯曲性能的描述

Plywood — Description of bending properties for structural plywood

黏合层板木材 强度等级和特性值的确定

Determination of strength grades and property values of glued laminated wood

木板.结构设计特征值.第1部分:OSB.碎料板和纤维板

Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards; German version EN 12369-1:2001

人造板-结构设计的特征值-第1部分：OSB、刨花板和纤维板

Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards; German version EN 12369-1:2001

人造板-结构设计的特征值-第2部分：胶合板

Wood-based panels - Characteristic values for structural design - Part 2: Plywood; German version EN 12369-2:2011 / Note: Applies in conjunction with DIN EN 636 (2003-11).

木基板材 结构设计用特征值 第3部分 紧密板材

Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels; English version of DIN EN 12369-3:2009-02

人造板 结构设计的特征值 第3部分：实木板

Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels; German and English version prEN 12369-3:2021

混凝土用硅粉 第1部分：定义、要求和合规标准；德文版 EN 13263-1:2005

Silica fume for concrete – Part 1: Definitions, requirements and compliance criteria; German version EN 13263-1:2005

木结构.矩形截面的强度等级结构木材.第2部分:机械等级.初始型号试验的附加要求.德文版本EN 14081-2-2010+A1-2012

Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for initial type testing; German version EN 14081-2:2010+A1:2012

结构木材.架空线用木杆;德文版本EN 14229-2010

Structural timber - Wood poles for overhead lines; German version EN 14229:2010

结构木材 架空线路的木杆

Structural timber - Wood poles for overhead lines; German version EN 14229:2010

胶合板.某些机械性能的计算方法

Plywood - Calculation method for some mechanical properties; German version EN 14272:2011

胶合板--某些力学性能的计算方法

Plywood - Calculation method for some mechanical properties; German version EN 14272:2011

木结构 特征值的计算和验证（草案）

Timber structures - Calculation and verification of characteristic values

木结构 特征值的计算和验证（草案）

Timber structures - Calculation and verification of characteristic values

木结构.样品用5%特征值的计算和验收标准

Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample; German version EN 14358:2006

木结构. 特征值的计算和验证; 德文版本EN 14358-2016

Timber structures - Calculation and verification of characteristic values; German version EN 14358:2016

木结构 结构层压胶合板材 要求（草案）

Timber structures - Structural laminated veneer lumber - Requirements

软焊剂 测试方法 第3部分：酸值测定、电位滴定法和目视滴定法（草案）

Soft soldering fluxes - Test methods - Part 3: Determination of acid value, potentiometric and visual titration methods

铝酸钙水泥 成分、规格和合格标准

Calcium aluminate cement - Composition, specifications and conformity criteria; German version EN 14647:2005

结构上的作用 第1-3部分：一般作用 雪荷载

National Annex National determined parameters Eurocode 1: Actions on structures Part 1-3: General actions - Snow loads

欧洲规范 1 结构作用 第3部分：一般作用、雪荷载；德文版 EN 1991-1-3:2003

Eurocode 1 — Actions on structures — Part 1-3: General actions, Snow loads; German version EN 1991-1-3:2003

支撑用建筑木材 强度等级（草案）

Structural timber - Strength classes

结构木材 强度等级

Structural timber — Strength classes

支撑用建筑木材 强度等级

Structural timber - Strength classes

结构木材 强度等级

Structural timber - Strength classes; German version EN 338:2016

建筑用木结构材料 机械性能和密度特征值的确定

Structural timber — Determination of characteristic values of mechanical properties and density

结构木材 机械性能和密度特征值的测定（草案）

Structural timber - Determination of characteristic values of mechanical properties and density

结构木材 机械性能和密度特征值的测定（草案）

Structural timber - Determination of characteristic values of mechanical properties and density

结构木材 机械性能和密度特征值的测定

Structural timber - Determination of characteristic values of mechanical properties and density; German and English version EN 384:2016+A1:2018/prA2:2019

结构木材 机械性能和密度特征值的测定

Structural timber - Determination of characteristic values of mechanical properties and density

承重木材 – 机械性能和堆积密度特征值的测定

Timber for load-bearing purposes – determination of characteristic values for mechanical properties and bulk density

木材结构.机械性能和密度特征值的测定.德文版本EN 384-2010

Structural timber - Determination of characteristic values of mechanical properties and density; German version EN 384:2010

结构木材 机械性能和密度特征值的测定（包括修正案：2018）

Structural timber - Determination of characteristic values of mechanical properties and density (includes Amendment :2018)

灯柱 第3-1部分：设计和验证 特征负载规范

Lighting columns - Part 3-1: Design and verification - Specification for characteristic loads; German version EN 40-3-1:2013

木结构 试验方法 木基板材机械特性的测定

Timber structures - Test methods - Determination of mechanical properties of wood based panels

木结构.试验方法.木基板材机械特性的测定

Timber structures - Test methods - Determination of mechanical properties of wood based panels; German version EN 789:2004

木结构 试验方法 人造板机械性能的测定

Timber structures - Test methods - Determination of mechanical properties of wood based panels; German version EN 789:2004

塑料制品 可比较的多点数据采集和表述 第3部分：环境对性能的影响（草案）

Comparable multi-point data collection and presentation of plastic products Part 3: Environmental impact on performance (draft)

油漆和清漆 使用光学成像评估涂层表面的缺陷 第2部分：多次冲击碎石测试的评估程序

Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 2: Evaluation procedure for multi-impact stone-chipping test (ISO 21227-2:2006); German version EN 21227-2:2006

塑料制品.可弯曲材料的扭曲刚度的测定.第2部分:氯乙烯的均聚物和共聚物的增塑化合物应用 (ISO 458-2:1985)

Plastics - Determination of stiffness in torsion of flexible materials - Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride (ISO 458-2:1985)

钢用于混凝土加固 焊接肋状增强钢筋 B500 钢筋、环和焊接网的技术交货条件

Steel for concrete reinforcement Welded ribbed reinforcement B500 Technical delivery conditions for bars, rings and welded mesh

液压路面粘合剂 组成、要求和符合性准则

Hydraulic pavement adhesive compositions, requirements and compliance criteria

建筑结构的设计与作用——第2-3部分：作用在建筑物上的雪荷载

Eurocode 1 - Basis of design and actions on structures — Part 2-3: Actions on structures - Snow loads

设计自由落体救生艇

Designing a free-fall lifeboat

统计土壤数据表示

Statistical soil data representation

水系灭火剂

Water-based fire extinguishing agent

结构用规格材特征值的测试方法

Standard methods for development of characteristic mechanical values for structural lumber

含工艺腔室类集成电路装备设计信息模型

Information model for containing process chamber IC equipment design

钢筋混凝土用钢筋和线材的认证方案

Certification scheme for steel bars and wires for the reinforcement of concrete structures

木结构. 特性值的测定. 第1部分: 基本要求

Timber structures - Determination of characteristic values - Part 1: Basic requirements

木结构. 特性值的测定. 第4部分: 工程化木制品

Timber structures - Determination of characteristic values - Part 4: Engineered wood products

木材结构 - 特性值的确定 - 第5部分:机械连接

Timber structures — Determination of characteristic values — Part 5: Mechanical connections

木材结构 - 特性值的确定 - 第6部分:大型部件和组件

Timber structures — Determination of characteristic values — Part 6: Large components and assemblies

滑动轴承 稳态条件下液体动压滑动止推垫轴承 第1部分：止推垫轴承的计算

Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 1: Calculation of thrust pad bearings

滑动轴承 静态条件下带有排泄槽的液压滑动轴颈轴承 第2部分：带有排泄槽的润滑油滑动轴颈轴承的计算用特性值

Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings with drainage grooves

滑动轴承. 静态条件下带有排泄槽的液压滑动轴颈轴承. 第2部分: 带有排泄槽的润滑油滑动轴颈轴承的计算用特性值

Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings with drainage grooves

滑动轴承 静态条件下不带排泄槽的液压滑动轴颈轴承 第1部分：不带排泄槽的润滑油滑动轴颈轴承的计算用特性值

Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings without drainage grooves

木材杆材.基本要求和试验方法

Timber poles - Basic requirements and test methods

竹子.结构设计

Bamboo - Structural design

滑动轴承 稳态条件下流体动力滑动径向轴承 第3部分：计算摆动垫径向轴承的特征值

Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 3: Characteristic values for calculation of tilting pad journal bearings

钢筋混凝土用钢.第1部分:光面钢筋

Steel for the reinforcement of concrete - Part 1: Plain bars

金属夏比摆锤冲击试验.仪器仪表

Charpy pendulum impact test for metal -- Instrumentation

安装粘土和混凝土互锁瓦的抗拔阻力测定 机械紧固件试验方法

Determination of the uplift resistance of installed clay and concrete interlocking tiles for roofing - Test method for mechanical fasteners

木质板材 设计结构时采用的特征值 第一部分 定向刨花板、刨花板和纤维板

Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards

木板 结构设计采用的特性值 第二部分：层压木

Wood-based panels - Characteristic values for structural design - Part 2: Plywood

木结构 特征值的计算和：

Timber structures - Calculation and verification of characteristic values

欧洲规范 1. 结构受力 第1-3部分 一般荷载 雪荷载

Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads

结构木材 强度等级

Structural timber - Strength classes

结构用集成材力学性能特征值的确定方法

Method for determining the characteristic values of mechanical properties of laminated materials for structural use

欧洲规范 1 - 结构作用 - 第 1-3 部分：一般作用 - 雪荷载

Eurocode 1 - Actions on structures - Part 1-3: general actions - Snow loads

混凝土、灰浆和薄泥浆用研磨成颗粒状的高炉碎渣 第1部分：定义、规范和合格标准

Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1 : definitions, specifications and conformity criteria.

欧洲法规7.土木技术设计 第1部分：总则

Eurocode 7 : geotechnical design - Part 1 : general rules

路面试验.行车荷载面形成的弯曲测定.第1部分:定义、测量方法、特性评估

Road testing. Measurement of a rolling load deflection. Part 1 : definitions, measurements, specific values.

气象要素特征值

Characteristic values of meteorological elements

钢筋 SS钢 13 86

Reinforcing steel - SS steel 13 86

钢筋 SS钢 13 87

Reinforcing steel - SS steel 13 87

木质面板 特征5百分位值和特征平均值的确定

Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values

木质板材 结构设计特征值 第一部分：OSB、颗粒板和纤维板

Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards

木质基板 结构设计特征值 第1部分：定向刨花板、胶合板和纤维板

Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards

木质板材 结构设计特性值 第2部分：胶合板

Wood-based panels - Characteristic values for structural design - Part 2: Plywood

木质板材 结构设计特征值 第2部分：胶合板

Wood-based panels - Characteristic values for structural design - Part 2: Plywood

木质板材 结构设计特征值 第2部分：胶合板

Wood-based panels - Characteristic values for structural design - Part 2: Plywood

临时工程美利体育官网首页网址 第2部分：材料信息

Temporary works equipment - Part 2: Information on materials

木结构 特征值的计算与验证

Timber structures - Calculation and verification of characteristic values

屋面用粘土瓦或混凝土瓦抗隆起性的测定 屋面系统法

Determination of the uplift resistance of installed clay or concrete tiles for roofing - Roof system method

用于混凝土、砂浆和水泥浆的磨细高炉矿渣 第1部分：定义、规范和合格标准

Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria

结构木材 机械性能和密度特征值的测定

Structural timber - Determination of characteristic values of mechanical properties and density

非破坏性测试 超声波美利体育登录入口官网美利体育官网首页网址的特性和验证 第3部分：组合美利体育官网首页网址（ISO 22232-3:2020）

Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020)

涂料和清漆用木油脂肪酸 试验方法和特征值（ISO 8623:2015）

Tall-oil fatty acids for paints and varnishes - Test methods and characteristic values (ISO 8623:2015)

木结构 特征值的确定 第3部分：胶合层压木（ISO 12122-3:2016 等同）

Timber structures - Determination of characteristic values - Part 3: Glued laminated timber (ISO 12122-3:2016, IDT)

木材结构 特征值的确定 第4部分：工程木制品（ISO 12122-4:2017 等同）

Timber structures - Determination of characteristic values - Part 4: Engineered wood products (ISO 12122-4:2017, IDT)

纤维增强聚合物（FRP）加固混凝土结构 纤维增强片材的规格（ISO 18319:2015 等同采用）

Fibre-reinforced polymer (FRP) reinforcement for concrete structures - Specifications of FRP sheets (ISO 18319:2015, IDT)

人造板 结构设计的特征值 第1部分：OBS、刨花板和纤维板

WOOD-BASED PANELS. CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN. PART 1: OBS, PARTICLEBOARDS AND FIBREBOARDS.

结构木材 架空线路用木杆

Structural timber - Wood poles for overhead lines

木质板材 结构设计特征值 第1部分：OSB、颗粒板和纤维板

Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards

木质板 结构设计的特征值 第2部分：胶合板

Wood-based panels - Characteristic values for structural design - Part 2: Plywood

统计方法在识别波动噪声排放中的应用

Anwendung statistischer Methoden bei der Kennzeichnung schwankender Geraeuschimmissionen

建筑物能源和水消耗的特征值 电能的特征值

Characteristic values of energy and water consumption of buildings - Characteristic values for electrical energy

测量室 分类和特点 规划和执行

Measuring rooms - Classification and characteristics - Planning and execution

光学 3D 测量系统 在多个单独视图中进行表面扫描的成像系统

Optical 3D-measuring systems - Multiple view systems based on area scanning

预应力混凝土用低合金钢丝

Low alloy steel wire for prestressed concrete