美利体育登录入口官网

工程用岩石试验方法 岩石强度试验 单轴压缩岩石材料变形能力的测定 50 MPa 及以上的强度

Rock test methods for engineering purposes Rock strength test Determination of deformation capacity of rock materials under uniaxial compression Strength of 50 MPa and above

工程用岩石试验方法 方法 4.3.2：岩石强度试验 岩石材料变形能力和单轴抗压强度的测定 岩石强度小于 50MPa

Methods of testing rocks for engineering purposes, Method 4.3.2: Rock strength tests — Determination of the deformability of rock materials and uniaxial compressive strength — Rock strength less than 50 MPa

测量粘性物质机械动力性能共振方法

Resonance Method for Measuring the Dynamic Mechanical Properties of Viscoelastic Materials

室温下耐火材料中的声速和其在获得近似杨氏模量中应用的标准试验方法

Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young’s Modulus

室温下耐火材料声速的标准试验方法及其在获得近似杨氏模量中的应用

Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young's Modulus

室温下耐火材料声速的标准试验方法及其在获得近似杨氏模量中的应用

Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young's Modulus

室温下耐火材料中的声速及声速在测量近似杨氏模量中的应用的标准试验方法

Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young''s Modulus

动态Young和#x2019的标准试验方法；s模量、剪切模量和泊松’；用振动脉冲激励耐火材料的s比

Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio of Refractory Materials by Impulse Excitation of Vibration

纤维抗拉强度和扬氏模量的标准试验方法

Standard Test Method for Tensile Strength and Young’s Modulus of Fibers

为获得杨氏模量测量加工的炭精及石墨材料中音速的标准试验方法

Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining Young''s Modulus

采用声速法获取人造碳和石墨材料近似杨氏模量值的标准试验方法

Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Value of Young's Modulus

用于共振白瓷餐具的杨氏模量, 剪切模量和泊松比的标准试验方法

Standard Test Method for Young’s Modulus, Shear Modulus, and Poisson’s Ratio For Ceramic Whitewares by Resonance

用共振法测定陶瓷洁具的杨氏模量、剪切模量和泊松比的标准试验方法

Standard Test Method for Young’s Modulus, Shear Modulus, and Poisson’s Ratio For Ceramic Whitewares by Resonance

Young和#x2019的标准试验方法；声波共振法测定耐火材料形状的s模量

Standard Test Method for Young’s Modulus of Refractory Shapes by Sonic Resonance

用声波共振法测定耐火型材杨氏模量的标准试验方法

Standard Test Method for Young’s Modulus of Refractory Shapes by Sonic Resonance

用电动机械法测量土壤和土壤集料实体的硬挺度和表观模数的标准试验方法

Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by an Electro-Mechanical Method

用电动机械法测量土壤和土壤集料实体的硬挺度和表观模数的标准试验方法

Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method

用于获得近似弹性常数的人造碳和石墨材料中声速的标准试验方法:杨氏模量、剪切模量和泊松比

Standard Test Method for Sonic Velocity in Manufactured Carbons and Graphite Materials for use in Obtaining Approximate Elastic Constants: Young’s Modulus, Shear Modulus, and Poisson’s Ratio

杨氏模量,正切模量,和弦向模量的标准试验方法

Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus

Young和#x2019的标准试验方法；s模量、切线模量和弦模量

Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus

杨氏模量、切向模量和弦向模量的标准试验方法

Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus

室温下剪切模量的标准测试方法

Standard Test Method for Shear Modulus at Room Temperature

静态确定金属在低温和高温下的杨氏模量的方法

Method for static determination of Young's modulus of metals at low and high temperatures

测量材料减振特性的标准试验方法

Standard Test Method for Measuring Vibration-Damping Properties of Materials

测量材料减振动特性的标准试验方法

Standard Test Method for Measuring Vibration-Damping Properties of Materials

第二届太平洋区域会议论文

Second Pacific Area Meeting Papers

高级工业陶瓷.陶瓷复合材料.增强纤维的试验方法.第6部分:高温下长纤维拉伸性能的测定

Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature

高级工业陶瓷.陶瓷复合材料.2000℃共振光束法测定弹性特性

Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2000 °C

防水柔性薄板材.屋顶防水用塑料和橡胶薄板材.暴露于沥青中的方法

Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Method for exposure to bitumen

高级工业陶瓷.单片陶瓷的热机械性能.第5部分:高温下弹性模量的测定

Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5:Determination of elastic moduli at elevated temperatures

高级工业陶瓷.室温下单片陶瓷的机械特性.第2部分:杨氏模量、剪切模量和泊松比测定

Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 2: Determination of Young’s modulus, shear modulus and Poisson’s ratio

精细陶瓷（先进陶瓷、先进技术陶瓷） 增强材料的测试方法 环境温度下长丝拉伸性能的测定

Fine ceramics (advanced ceramics, advanced technical ceramics). Methods of test for reinforcements. Determination of tensile properties of filaments at ambient temperature

机械振动和冲击.粘弹性材料的动态机械特性的表征.悬臂剪切束法

Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Cantilever shear beam method

金属和其他无机涂层 用弯曲共振法测量热障涂层在高温下的杨氏模量

Metallic and other inorganic coatings. Measurement of Young's modulus of thermal barrier coatings at elevated temperature by flexural resonance method

航空航天系列-碳纤维热固性树脂-单向层压板-平行于纤维方向的压缩试验（草案）

Aerospace series - Carbon fibre thermosetting resin - Unidirectional laminates - Compression test parallel to fibre direction

航空航天系列碳纤维热固性树脂单向层压板平行于纤维方向的压缩试验

Aerospace series - Carbon fibre thermosetting resin - Unidirectional laminates - Compression test parallel to fibre direction; German and English version EN 2850:2017

航空航天系列-碳纤维热固性树脂-单向层压板-平行于纤维方向的压缩试验

Aerospace series - Carbon fibre thermosetting resin - Unidirectional laminates - Compression test parallel to fibre direction; German and English version EN 2850:2017

高级工业陶瓷.室温单块陶瓷的机械特征.第2部分:杨氏模量、剪切模量和泊松比测定

Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 2: Determination of Young's modulus, shear modulus and Poisson's ratio; English version of DIN EN 843-2:2007-03

先进技术陶瓷.整体陶瓷在室温下的机械性能.第2部分:杨氏模量、剪切模量和泊松比的测定;德文版 EN 843-2:2006

Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 2: Determination of Young's modulus, shear modulus and Poisson's ratio; German version EN 843-2:2006

高级陶瓷 单晶陶瓷 室温机械性能 第2部分：弹性模量的确定

Advanced ceramics - Room temperature mechanical properties of single crystal ceramics - Part 2: Determination of the elastic modulus

金属材料.弹性模量和泊松比试验方法

Metallic materials.Determination of modulus of elasticity and Poisson's ratio

平板显示器基板玻璃测试方法 第4部分：力学性能

Test methods for glass substrates for flat panel displays Part 4: Mechanical properties

无色光学玻璃测试方法 第6部分：杨氏模量、剪切模量及泊松比

Test methods of colourless optical glass.Part 6:Young's modulus,shear modulus and Poisson's ratio

确保测量一致性的状态系统 标准参考数据 VT Brend 的钛合金 20°~800°温度范围内的声速、相对温度膨胀、密度和杨氏模量

State system for ensuring the uniformity of measurements. Standard reference data. Titanium alloys of VT Brend. Speed of sound, relative temperature expansion, density and Young's modulus in the temperature range from 20 °С to 800 °С

机械振动和冲击. 粘弹性材料动态机械性能特征. 第3部分. 悬臂剪切梁法

Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Part 3. Cantilever shear beam method

机械振动和冲击.粘弹性材料的动态机械特性的表征.第2部分:共振法

Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 2: Resonance method

机械振动和冲击.粘弹性材料动态机械性能的特性.第5部分:基于测量和有限元分析之间比对的泊松比

Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 5: Poisson ratio based on comparison between measurements and finite element analysis

金属和其他无机涂层 杨氏和apos的测量；梁弯曲热障涂层的s模量

Metallic and other inorganic coatings - Measurement of Young's modulus of thermal barrier coatings by beam bending

金属和其他无机涂层.用弯曲共振法测量高温下热障涂层的杨氏模量

Metallic and other inorganic coatings - Measurement of Young's modulus of thermal barrier coatings at elevated temperature by flexural resonance method

天然气上游领域 页岩脆性指数的测定与计算 第2部分：基于三轴试验方法的页岩力学特性测定

Natural gas upstream area — Determination and calculation of shale brittleness index — Part 2: Determination of shale mechanical characteristics based on triaxial testing method

具有全密封垫铝合金管法兰的计算基础(修改件1)

Basis for calculation of aluminium alloy pipe flanges with full face gasket (Amendment 1)

四点弯曲法测量热障涂层杨氏模量的方法

Measurement method for Young's modulus of thermal barrier coatings by four-point bending

高温下金属材料的扬式模量试验方法

Test method for Young's modulus of metallic materials at elevated temperature

现代技术陶瓷 陶瓷复合材料 利用共振棒法测定至2000°C的弹性性能

Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2 000 °C

柔性防水板 塑料和弹性体防水材料屋面卷材 沥青法

Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Method for exposure to bitumen

超塑性 第18部分：力学性能测试 带银和（或）银合金包套的Bi-2223和Bi-2212复合材料超导体在室温下的拉伸试验（IEC 61788-18:2013）

Superconductivity -- Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors (IEC 61788-18:2013)

先进技术陶瓷 单相陶瓷的热机械性能 第5部分：高温下弹性模量的测定

Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures

现代技术陶瓷 室温下单体陶瓷的机械性能 第二部分 杨氏模量、剪切模量和泊松系数的测定

Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 2: Determination of Young's modulus, shear modulus and Poisson's ratio

超声波在钢中温度影响效应研究

Study on the Temperature Effect of Ultrasonic Wave in Steel

高温杨氏模量测试方法

High temperature Young's modulus test method

先进陶瓷 陶瓷复合材料 使用共振梁法测定弹性性质至2000摄氏度

Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2 000 degrees Celsius

柔性防水片材 用于屋面防水的塑料和橡胶片材 与沥青暴露的方法

Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Method for exposure to bitumen

先进陶瓷 室温下单晶陶瓷的力学性能 第2部分：杨氏模量、剪切模量和泊松比的测定

Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 2: Determination of Young's modulus, shear modulus and Poission's ratio

高级技术陶瓷 复合陶瓷 增强材料测试方法 第4部分：环境温度下的纤维拉伸特性测定

Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 4: Determination of tensile properties of filaments at ambient temperature

航空航天系列 碳纤维热固性树脂 单向层压板 平行于纤维方向的压缩测试

Aerospace series - Carbon fibre thermosetting resin - Unidirectional laminates - Compression test parallel to fibre direction (Endorsed by Asociación Espa?ola de Normalización in December of 2017.)

耐火制品的试验方法 第1部分：通过脉冲激励振动测定动态杨氏模量（MOE）（ISO 12680-1:2005）

Methods of test for refractory products - Part 1: Determination of dynamic Young's modulus (MOE) by impulse excitation of vibration (ISO 12680-1:2005)

铝用炭素材料美利体育登录入口官网方法 第13部分：弹性模量的测定

Test methods for carbon materials for aluminum - Part 13: Determination of elastic modulus

基于外部振动的肝组织超声弹性测量美利体育官网首页网址

Ultrasonic elasticity measurement device of liver tissue based on external vibration