美利体育登录入口官网

通用瓦楞纸板箱和纸板坯料规范

Specification for general purpose corrugated fibreboard boxes and blanks

结构钢．焊接工型钢

Structural steel - Welded I sections

拧丝锥 公制地螺纹丝锥规范：制造公差

Screwing taps. Specification for metric ground thread taps: manufacturing tolerances

丝锥 第4部分：公制磨口丝锥规范：制造公差

Screwing taps — Part 4 : Specification for metric ground thread taps : manufacturing tolerances

激光和激光相关美利体育官网首页网址.标准光学元件.紫外线,可见光和近红外光谱范围内的元件

Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges

造船. 船舶螺旋推进器. 制造公差. 直径大于2.50 m的推进器

Shipbuilding. Ship screw propellers. Manufacturing tolerances. Propellers of diameter greater than 2,50 m

造船. 船舶螺旋推进器. 制造公差. 直径在0.80至2.50 m (包含本数) 范围内的推进器

Shipbuilding. Ship screw propellers. Manufacturing tolerances. Propellers of diameter between 0,80 and 2,50 m inclusive

电力和水资源保护. 第35部分:收费标准和税收文件. 第A子部分:适用性. 第35.7节:税费及相关材料的电子文件.

Conservation of power and water resources. Part35:Filing of rate schedules and tariffs. SubpartA:Application. Section35.7:Electronic filing of tariffs and related materials.

建筑结构公差 第3部分：木材及其衍生木制品的建筑部件

Tolerances in building constructions - Part 3: Building components of wood and derived timber products

建筑结构公差 第3部分：木材和木制品的建筑构件

Tolerances in building constructions - Part 3: Building components of wood and derived timber products

圆线材及棒材制螺旋弹簧.第3部分:热成形压缩弹簧要求的信息.印样C

Helical springs made of round wire and rod - Part 3: Information to be given in order to obtain the hot formed compression spring required, printed form C

未燃烧压力容器 部分 3：设计

Unfired Pressure Vessels Part 3: Design

丝锥.螺纹制造公差

Taps. Manufacturing tolerances on the threaded portion

造船.船舶螺旋桨.制造公差.第1部分:直径大于2.5 m的螺旋桨

Shipbuilding. Ship screw propellers. Manufacturing tolerances. Part 1. Propellers of diameter greater than 2,5 m

造船.船舶螺旋桨.制造公差.第2部分:直径为0.8-2.5 m(包含)的螺旋浆

Shipbuilding. Ship screw propellers. Manufacturing tolerances. Part 2. Propellers of diameter between 0,8 and 2,5 m inclusive

粗牙和细牙惠氏螺纹 短牙头 适用于机床或手工 螺纹部分制造公差

Short male connectors for machine or hand use, with coarse and fine Whitworth threads. Manufacturing tolerances on the threaded portion.

造船 船用螺旋桨 制造公差 第1部分:螺旋桨直径>2.5m

Shipbuilding; Ship screw propellers; Manufacturing tolerances; Part 1 : Propellers of diameter greater than 2,50 m

造船 船用螺旋桨 制造公差 第2部分:螺旋桨直径0.80m～2.50m(包括2.50m)

Shipbuilding; Ship screw propellers; Manufacturing tolerances; Part 2 : Propellers of diameter between 0,80 and 2,50 m inclusive

ISO公制磨制螺纹用丝锥 公差范围从4H至8H 从4G至6G 涵盖粗牙和细牙规格 内螺纹零件制造公差（ISO 2857:1973 含A1:1984和A2:1986修订）

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches - Manufacturing tolerances on the threaded portion (ISO 2857:1973 + A1:1984 +A2:1986)

公差铜和铜合金棒材和棒材

Tolerances Copper and Copper Alloy Bars and Rods

公差铜及铜合金无缝管

Tolerances Copper and Copper Alloy Seamless Tubing

铜及铜合金无缝管材公差

Tolerances Copper and Copper Alloy Seamless Tubing

铜及铜合金线公差

Tolerances Copper and Copper Alloy Wire

公差 公制铜和铜合金棒材和棒材

Tolerances@ Metric Copper and Copper Alloy Bars and Rods

公差 公制铜和铜合金无缝管

Tolerances@ Metric Copper and Copper Alloy Seamless Tubing

公差 公制铜和铜合金线

Tolerances@ Metric Copper and Copper Alloy Wire

公差 公制耐腐蚀和耐热钢管

Tolerances@ Metric Corrosion and Heat Resistant Steel Tubing

公差 公制钛和钛合金管

Tolerances@ Metric Titanium and Titanium Alloy Tubing

公差 公制钛和钛合金管

Tolerances@ Metric Titanium and Titanium Alloy Tubing

公差 公制低合金钢棒

Tolerances@ Metric Low-Alloy Steel Bars

公差 公制碳钢和合金钢管

Tolerances@ Metric Carbon and Alloy Steel Tubing

未烧成压力容器 第4部分：制造

Unfired pressure vessels - Part 4: Fabrication

ISO 公制螺纹用磨削螺纹丝锥 公差为 4H 至 8H 和 4G 至 6G 粗螺距和细螺距 螺纹部分的制造公差

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches - Manufacturing tolerances on the threaded portion