美利体育登录入口官网

钢铸件标准规范 不锈钢 沉淀硬化

Standard Specification for Steel Castings, Stainless, Precipitation Hardening

焊接沉淀硬化或冷加工镍合金管标准规范

Standard Specification for Welded Precipitation Hardenable or Cold Worked, Nickel Alloy Tube

中高温用沉淀硬化和冷加工镍合金棒材、锻件和锻坯的标准规范

Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

沉淀硬化或冷加工的无缝镍合金管和管的标准规范

Standard Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube

铬镍铜钼耐腐蚀钢（沉淀硬化）钢坯、棒材、锻件和零件规范（1270 MPa 至 1470 MPa）

Specification for Chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1270 MPa to 1470 MPa)

淬火、回火或沉淀硬化条件下的高屈服强度结构钢板材和宽平板——第1部分：一般交货条件

Plates and Wide Flats Made of High Yield Strength Structural Steels in the Quenched and Tempered or Precipitation Hardened Conditions - Part 1: General Delivery Conditions

航空航天系列.FE-PM3801(X5CrNiCu17-4)型钢.空气熔炼、溶解处理和沉淀处理的棒材.a/D≤200mm、Rm≤1310MPa

Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, bar a or D 200 mm, Rm 1310 MPa

航空航天系列.FE-PM3801(X5CrNiCu17-4)型钢.空气熔炼、溶解处理和沉淀处理的棒材.a/D≤200mm.Rm≥930MPa

Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, bar a or D 200 mm, Rm 930 MPa

航空航天系列.FE-CM3801(X5CrNiCuNb16-4)型钢.均匀溶解处理和沉淀淬火.熔模铸造.De≤50mm.Rm≥1030MPa

Aerospace series - Steel FE-CM3801 (X5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened - Investment casting - De ≤ 50 mm - Rm ≥ 1 030 MPa

航空航天系列.FE-CM3801(GX5CrNiCuNb16-4)型钢.均匀分布的、溶解处理和沉淀淬火的熔模铸件.De≤50mm.Rm≥900MPa

Aerospace series - Steel FE-CM3801 (GX5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened, investment casting De 50 mm, Rm 900 MPa

航空航天系列 钢GX5CrNiCuNb16-4 (1.4525) 均质化、固溶处理并沉淀硬化 精密铸造 直径≤50毫米 抗拉强度≥900兆帕

Aerospace series. Steel GX5CrNiCuNb16-4 (1.4525). Homogenized, solution treated and precipitation hardened. Investment casting. De ≤ 50 mm. Rm ≥ 900 MPa

航空航天系列 钢FE-PL1502 (25CrMo4) 退火的棒材和线材 De≤40 mm 普通扭矩螺母用（草案）

Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Bar and Wire - D<(Index)e> 40 mm - For prevailing torque nuts

航空航天系列 FE-PM3801(X5CrNiCu17-4)钢 空气熔炼、固溶处理和沉淀硬化处理棒材 直径≤200mm、抗拉强度≥1310MPa

Aerospace series – Steel FE-PM3801 (X5CrNiCu17-4) – Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 1 310 MPa

航空航天系列.FE-PM3801(X5CrNiCu17-4)型钢.空气熔炼、溶解处理和沉淀处理.棒材.a或D≤200mm.R<(指数)m>≥930MPa

Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, bar a or D 200 mm, R<(Index)m> 930 MPa; German and English version EN 3161:2007

航空航天系列.FE-CM3801(X5CrNiCuNb16-4)型钢.均匀分布、溶解处理和沉淀淬火.熔模铸造.D<(指数)e>≤50mm.R<(指数)m>≥1030MPa

Aerospace series - Steel FE-CM3801 (X5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened - Investment casting - D<(Index)e> 50 mm - R<(Index)m> 1030 MPa; German and English version EN 3973:2006

航空航天系列 - 钢 FE-CM3801（X5CrNiCuNb16-4） - 均匀化、固溶处理和沉淀硬化 - 精密铸造件 - 直径≤50毫米 - 抗拉强度≥1,030 MPa

Aerospace series – Steel FE-CM3801 (X5CrNiCuNb16-4) – Homogenized, solution treated and precipitation hardened – Investment casting – De ≤ 50 mm – Rm ≥ 1 030 MPa

航空航天系列.FE-CM3801 (GX5CrNiCuNb16-4)型钢.分布均一的、溶液处理的和沉淀硬化的熔模铸件.D<指数e>≤50 mm.R<指数m>≤900 MPa

Aerospace series - Steel FE-CM3801 (GX5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened, investment casting D<(Index)e> 50 mm, R<(Index)m> 900 MPa; German and English version EN 4216:2007

航空航天系列 - FE-CM3801钢（GX5CrNiCuNb16-4） - 扩散退火、固溶处理和沉淀硬化精密铸件，直径≤50mm，抗拉强度≥900MPa

Aerospace series – Steel FE-CM3801 (GX5CrNiCuNb16-4) – Homogenized, solution treated and precipitation hardened, investment casting De ≤ 50 mm, Rm ≥ 900 MPa

航空航天系列 耐热合金 NI-PH1301（NiCr19Co18Mo4Ti3Al3） 固溶处理和沉淀处理 棒材和型材 D 200 mm

Aerospace series - Heat-resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3) - Solution treated and precipitation treated - Bars and sections - D 200 mm; German and English version EN 4374:2022

航空航天系列 - X3CrNiMoAl（1.4534）钢 - 真空感应熔炼和自耗电极重熔 - 固溶处理和沉淀硬化 - 机加工用棒材 - ≤200mm - 1200MPa～1350MPa

Aerospace series – Steel X3CrNiMoAl (1.4534) – Vacuum induction melted and consumable electrode remelted – Solution treated and precipitation treated – Bars for machining – ≤200 mm – 1 200 MPa 1 350 MPa

航空用沉淀硬化不锈钢棒规范

Specification for precipitation-hardening stainless steel bars for aviation

热加工温度下沉淀硬化铁素体-珠光体工程用钢

Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures

航空系列 钢 FE-CM3801 (GX5CrNiCuNb16-4) 均匀化、固溶处理及沉淀硬化 投资铸造 De ≤ 50 mm Rm ≥ 900 MPa

Aerospace series - Steel FE-CM3801 (GX5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened, investment casting De ≤ 50 mm, Rm ≥ 900 MPa

航空航天系列-NiCr19Fe19Nb5Mo3（2.4668）耐热合金 固溶处理和沉淀处理 棒材和型材 De≤200 mm

Aerospace series - Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) solution treated and precipitation treated - Bar and section, De ≤ 200 mm

锻造铍铜合金的热处理工艺(铜合金:编号为C17000、C17200、C17300、C17500及C17510)

Heat Treatment of Wrought Copper-Beryllium Alloys, Process for (Copper Alloys: Numbers C17000, C17200, C17300, C17500, and C17510)

66.5Ni 3.0Al 0.62Ti 28Cu经沉淀硬化处理的热轧耐腐蚀镍铜合金棒材和锻件

Nickel-Copper Alloy, Corrosion-Resistant, Bars and Forgings 66.5Ni - 3.0Al - 0.62Ti - 28Cu Hot-Finished, Precipitation Hardenable UNS N05500

钢，耐腐蚀和耐热，焊管 12Cr 8.5Ni 0.30Cb 1.1Ti 2.0Cu 真空感应加自耗电极真空熔化固溶热处理，可沉淀硬化

Steel, Corrosion and Heat-Resistant, Welded Tubing 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu Vacuum Induction Plus Consumable Electrode Vacuum Melted Solution Heat Treated, Precipitation Hardenable

钢板和钢带 耐腐蚀和中等耐热 15Cr 8.4Ni 2.2Mo 1.1Al 真空感应熔炼 固溶热处理

Steel Sheet and Strip@ Corrosion and Moderate Heat Resistant 15Cr - 8.4Ni - 2.2Mo - 1.1Al Vacuum Induction Melted@ Solution Heat Treated

钢耐腐蚀棒材锻件管材和环 16Cr - 4.0Ni - 0.30Cb - 4.0Cu 固溶热处理沉淀硬化 (H1025) 自耗电极重熔 (UNS S17400)

Steel@ Corrosion-Resistant@ Bars@ Wire@ Forgings@ Tubing@ and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution Heat Treated@ Precipitation Hardened (H1025) Consumable Electrode Remelted (UNS S17400)

不锈钢 耐腐蚀 棒材 线材 锻件 机械管 环形件 以及用于锻造、环形件和冲头的原材料 16Cr 4.0Ni 0.30Cb 4.0Cu（17-4 PH?） 固溶热处理 可沉淀硬化 优质航空级材料 可消耗电极...

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forging, Rings and Heading, 16Cr - 4.0Ni - 0.30Cb - 4.0Cu (17-4 PH?), Solution Heat Treated, Precipitation Hardenable, Premium Aircraft Quality, Consumable Electrode

耐腐蚀钢、棒材、线材、锻件、环和挤压件 13Cr 8.0Ni 2.2Mo 1.1Al 真空感应加自耗电极熔化溶液热处理，沉淀硬化（H1025）

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardened (H1025)

耐腐蚀钢、棒材、线材、锻件、环和挤压件 13Cr 8.0Ni 2.2Mo 1.1Al 真空感应加自耗电极熔化溶液热处理，可沉淀硬化（UNS S13800）

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable (UNS S13800)

耐腐蚀钢、棒材、线材、锻件、机械管材和环 16Cr 4.0Ni 0.30Cb（Nb） 4.0Cu 固溶和沉淀热处理（H1150）

Steel, Corrosion Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb (Nb) - 4.0Cu Solution and Precipitation Heat Treated (H1150)

耐腐蚀钢、棒材、线材、锻件、机械管材和环 16Cr 4.0Ni 0.30Cb（Nb） 4.0Cu 固溶和沉淀热处理（H900）

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 16Cr- 4.0Ni - 0.30Cb (Nb) - 4.0Cu Solution and Precipitation Heat Treated (H900)

耐腐蚀钢、棒材、线材、锻件、机械管材和环 16Cr 4.0Ni 0.30Cb（Nb） 4.0Cu 固溶和沉淀热处理（H925）

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 16Cr- 4.0Ni - 0.30Cb (Nb) - 4.0Cu Solution and Precipitation Heat Treated (H925)

耐腐蚀钢、棒材、线材、锻件、环和挤压件 15Cr 4.5Ni 0.30Cb（Nb） 3.5Cu 消耗品重熔、固溶和沉淀热处理（H1025）

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu Consumable Remelted, Solution and Precipitation Heat Treated (H1025)

耐腐蚀钢、棒材、线材、锻件、环和挤压件 15Cr 4.5Ni 0.30Cb（Nb） 3.5Cu 固溶和沉淀热处理（H925）

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu Solution and Precipitation Heat Treated (H925)

耐腐蚀钢、棒材、线材、锻件、环和挤压件 15Cr 4.5Ni 0.30Cb（Nb） 3.5Cu 自耗电极 重熔固溶热处理，可沉淀硬化

Steel, Corrosion Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu Consumable Electrode Remelted Solution Heat Treated, Precipitation Hardenable

钢丝 耐腐蚀 11.8Cr 8.5Ni 0.30（Cb + Ta） 1.1Ti 2.0Cu 沉淀硬化 弹簧回火（UNS45500）

Steel Wire@ Corrosion Resistant 11.8Cr - 8.5Ni - 0.30(Cb + Ta) - 1.1Ti - 2.0Cu Precipitation Hardenable@ Spring Temper (UNS45500)

钢 耐腐蚀 线材 17Cr 7.1Ni 1.1Al 冷拔 沉淀硬化（UNS S17700）

Steel@ Corrosion Resistant@ Wire 17Cr - 7.1Ni - 1.1Al Cold Drawn@ Precipitation-Hardenable (UNS S17700)

耐腐蚀钢板、带材和钢板12Cr-8.5Ni-0.30Cb-1.1Ti-2.0Cr多次熔化 固溶热处理 沉淀硬化

Steel, Corrosion-Resistant, Sheet, Strip, and Plate 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu Multiple Melted, Solution Heat Treated, Precipitation Hardenable

耐腐蚀钢 板、带、板坯 15Cr 4.5Ni 0.30Cb (Nb) 3.5Cu (15-5PH?) 可熔消耗电极 优质航空级 固溶热处理和时效硬化（H1025）

Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu (15-5PH?), Consumable Electrode Remelted, Premium Aircraft Quality, Solution Heat Treated and Precipitation Hardened (H1025)

镍合金 耐腐蚀和耐热 板材 带材 和板材 72Ni 15.5Cr 0.95（Cb + Ta） 2.5Ti 0.70Al 7.0Fe 自耗电极或真空感应熔化溶液热处理 沉淀硬化（UNS N07750）

Nickel Alloy@ Corrosion and Heat Resistant@ Sheet@ Strip@ and Plate 72Ni - 15.5Cr - 0.95 (Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted Solution Heat Treated@ Precipitation Hardenable (UNS N07750)

用于热加工温度下沉淀硬化的铁素体 珠光体钢

Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures

Aerospace系列 耐热镍基合金NI-P96-HT 冷拉并时效处理 钢丝 直径≤10毫米

Aerospace series - Heat resisting nickel base alloy NI-P96-HT - Cold drawn and precipitation treated - Wire - D ≤ 10 mm

航空系列 钢FE-PM1503 (X3CrNiMoAl 13-8-2) 真空感应熔炼并用可熔电极重熔 解析处理和时效处理 切削加工用棒材 a或D = 150 mm 屈服强度Rm = 1 400 MPa

Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D = 150 mm - 1 200 MPa = Rm = 1 400 MPa

航空系列 耐热合金FE-PA2602（X4NiCrTiMoV26-15） 解析处理和时效处理 杆材和锻件 直径 = 100 mm

Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Bars and sections - De = 100 mm

航空系列 钢FE-CM3801 (X5CrNiCuNb16-4) 等温处理、固溶处理和沉淀强化 投资铸造 De ≤ 50 mm Rm ≥ 1 030 MPa

Aerospace series - Steel FE-CM3801 (X5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened - Investment casting - De ≤ 50 mm - Rm ≥ 1 030 MPa

航空系列 钢FE-CM3801（GX5CrNiCuNb16-4） 等温处理、固溶处理和沉淀强化 投资铸造 De ≤ 50 mm, Rm ≥ 900 MPa

Aerospace series - Steel FE-CM3801 (GX5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened, investment casting De ≤ 50 mm, Rm ≥ 900 MPa