美利体育登录入口官网

自锁螺母 最高工作温度小于或等于425°C 测试方法

Nuts, self-locking, with maximum operating temperature less than or equal to 425°C. Test methods

航空航天系列 抗拉强度不超过1249 MPa的螺栓和自由运转螺母的一般要求规范

Aerospace series — Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa

铆钉 实心 100° 圆顶普通沉头 金属材料 带或不带表面处理 方面

Rivets, solid, 100° normal countersunk head with dome, metallic material, with or without surface treatment. Dimensions

六角自锁螺母 带沉孔和防松垫圈 带 MJ 螺纹 等级：1100 MPa（环境温度下）/235°C 1100 MPa（环境温度下）/315°C 1100 MPa（环境温度下） ))/425°C 方面

Nuts, hexagonal, self-locking, with counterbore and captive washer, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C, 1100 MPa (at ambient temperature)/425°C. Dimensions

NI-P100HT(铬镍铁合金 718)耐热镍基合金长螺纹减荷螺杆双六角头螺栓.等级:1275MPa(室温)/650℃

Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification:1275 MPa (at ambient temperature)/650 °C

NI-P101HT(沃斯帕洛伊)型耐热镍基合金制长螺纹安全柄十二角头螺栓.等级:1210 MPa(环境温度)/730℃

Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C

FE-PA92HT(A286)耐热钢制的长螺纹减荷螺杆的T型头螺栓.等级:900MPa(室温)/650℃

Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286). Classification: 900 MPa (at ambient temperature)/650°C

耐热镍基合金 NI - P100HT (Inconel 718) 螺栓，T 型头，卸压杆，长螺纹 — 分类：1275 MPa（环境温度下）/ 650 °C

Bolts, T - head, relieved shank, long thread, in heat resisting nickel base alloy NI - P100HT (Inconel 718) — Classification : 1275 MPa (at ambient temperature)/ 650 °C

FE-PA92HT(A286)耐热钢长螺纹减荷螺杆的六角头螺栓.等级:900 MPa(室温)/650℃

Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286). Classification: 900 MPa (at ambient temperature)/650°C

NI-P100HT(Inconel 718)型耐热镍基合金制长螺纹、减荷螺杆六角头螺栓.等级:1275 MPa(室温)/650℃

Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 °C

耐热镍基合金NI-P101HT(沃斯帕洛尹合金)薄柄长螺纹六角头螺栓.等级:1210 MPa(室温)/730℃

Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C

双六角形自锁螺母，采用耐热镍基合金 NI - P101HT (Waspaloy) — 分类：1210 MPa（环境温度）/ 730 °C

Nuts, bihexagonal, self - locking, in heat resisting nickel base alloy NI - P101HT (Waspaloy) — Classification : 1210 MPa (at ambient temperature)/ 730 °C

航空航天系列.钝化处理的耐热耐蚀钢制短螺纹紧公差标准螺杆标准六角头螺栓.分类:1100 MPa(环境温度)/425℃

Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature) / 425 °C

航空航天系列.未涂敷FE-PA2601(A286)型耐热钢制夹具自锁紧螺母.等级:1100MPa(室温)/425℃

Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), uncoated - Classification: 1 100 MPa (at ambient temperature)/425 °C

航空航天系列.FE-PM1708(FV535)型耐热钢制长螺纹、减荷螺杆、T字头螺栓.等级:1000MPa/550℃.未电镀

Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel, FE-PM1708 (FV535) - Classification: 1000 MPa/550 °C - Unplated

航空航天系列.MoS2润滑的耐腐蚀钢增量沉孔双耳浮动自锁紧固定螺母.等级:900MPa(室温)/315℃

Aerospace series - Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in corrosion resisting steel, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/315 °C

航空航天系列.梅花冲头.旋具柄

Aerospace series - Six lobe recess - Drivers, handle

航空航天系列.镀锡黄铜制螺纹接近顶部带槽平头螺丝.等级:300MPa(室温)/80℃

Aerospace series - Screws, pan head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 °C; German version EN 2651:1996

航空航天系列.耐高温镍基合金NI-P100HT(因康镍 718)制长螺纹细螺杆十二角螺丝钉.等级:1275 Mpa(室温)/650℃

Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2927:1996

航空航天系列.高温镍基合金HI-P100HT(因康镍718)长螺纹细杆T字头螺栓.等级:1275 MPa(室温)/650℃

Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2933:1996

航空航天系列 耐热镍基合金（NI-P100HT） 冷加工和软化 紧固件连续锻造或挤压用棒材和线材 3 mm D 30 mm（草案）

Aerospace series - Heat resisting nickel base alloy (NI-P100HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm D 30 mm

航空航天系列.十二角扳手和套筒.技术规范

Aerospace series - Wrenches and sockets, bi-hexagonal - Technical specification; German and English version EN 3709:2006

航空航天系列 - 螺母，锚栓，自锁，单耳，固定，缩径系列，带沉孔，耐热钢，MoS<(Index)2>润滑 - 分类：1100 MPa（环境温度）/315 °C

Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 3768:2012

航空航天系列.强度等级小于或等于1100 MPa、金属材料制的、有涂覆或未涂覆、标称杆、短和中等长度MJ螺纹、内部偏移十字形肋状或非肋状驱动的100°异径埋头螺钉.尺寸

Aerospace - Screws, 100 degrees reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensi

航空航天系列 螺栓 标准六角头 公差标准杆 短螺纹 钛合金材质 阳极氧化 MoS2润滑 米制系列 分类：1 100 MPa（环境温度下）/ 315 °C

Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C

航空航天系列 六角螺母 平形 标准高度 标准对边距 耐热钢钝化 等级：1 100 MPa/650 °C

Aerospace series - Nuts, hexagonal, plain, normal height, normal across flats, heat resisting steel passivated - Classification: 1 100 MPa/650 °C

航空航天系列 六角螺母 塑料环自锁 普通高度 普通对边距 合金钢材质 镉镀层 分类：900 MPa（环境温度下）/ 120 °C

Aerospace series - Nuts, hexagon, self-locking by plastic ring, normal height, normal across flats, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature) / 120 °C

螺栓 机花键加长垫圈 PD 柄长螺纹 AMS5731 公制

BOLT@ MACHINE-SPLINE EXTENDED WASHER@ PD SHANK LONG THREAD@ AMS5731@ METRIC

坚果 六角头 平头 正常高度 沿槽方向正常 钢 镉镀层 分类 1 100 MPa/235摄氏度

Nuts, hexagon, plain, normal height, normal across flats, steel, cadmium plated - Classification 1 100 MPa/235 degrees Celsius

航空航天系列 双六角头、削肩、长螺纹的紧固件 在耐热钢FE-PM38（FV535）中分类：1 000 MPa/550摄氏度

Aerospace series - Bolts with double hexagon head, relieved shank, long thread - In heat resisting steel FE-PM38 (FV535) Classification: 1 000 MPa/550 degrees Celsius

航空航天系列 钛合金TI-P64001、MoS2涂层、六叶槽、普通柄、长螺纹、盘头螺栓 等级：1100MPa（环境温度）

Aerospace series - Bolts, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, MoS2 coated - Classification: 1 100 MPa (at ambient temperature)

Aerospace系列 双六角头螺栓 公差小的杆部 中等长度的螺纹 在耐热镍基合金NI-PH2601（因科镍718）中 分类：屈服强度1 550 MPa（在室温下）/650摄氏度

Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 550 MPa (at ambient temperature)/650 degrees C