美利体育登录入口官网

液压流体动力 16 MPa（160 bar）中型和 25 MPa（250 bar）系列单杆缸附件的安装尺寸

Hydraulic fluid power — Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series

商用车和客车 1 型、2 型和 3 型交流发电机安装尺寸规范

Specification for mounting dimensions of alternators, types 1, 2 and 3 for commercial vehicles and buses

液压传动. 10 MPa (100 bar) 系列汽缸的安装尺寸

Hydraulic fluid power. Mounting dimensions for cylinders, 10 MPa (100 bar) series

液压传动.10MPa(100 bar)下使用的缸径在32mm到100mm的单杆、短冲程气缸.安装尺寸

Hydraulic fluid power. Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar). Mounting dimensions

液压流体动力.16MPa(160bar)系列单杆汽缸用安装尺寸.小型系列

Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series. Compact series

液压流体动力 16 MPa(160bar)系列单杆气缸的安装尺寸 孔径为 250mm 至 500mm 的紧凑型系列

Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series. Compact series with bores from 250 mm to 500 mm

液压传动.25M Pa (250巴)系列单杆汽缸安装尺寸

Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25M Pa (250 bar) series

流体动力系统和组件 气缸 安装尺寸和安装类型的识别码

Fluid power systems and components. Cylinders. Identification code for mounting dimensions and mounting types

液压流体动力 单杆气缸附件安装尺寸 16 MPa(160bar)中型和 25 MPa(250bar)系列

Hydraulic fluid power. Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series

液压流体动力 单杆气缸附件安装尺寸 16 MPa(160bar)紧凑型系列

Hydraulic fluid power. Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series

气动流体动力 气缸 1000kPa(10bar)系列 杆端U型夹安装尺寸

Pneumatic fluid power. Cylinders, 1 000 kPa (10 bar) series. Mounting dimensions of rod-end clevises

流体动力.160巴紧密式液压缸.安装尺寸

Fluidpower; hydraulic cylinder 160 bar compact; mounting dimensions

带攻丝螺纹的薄弹簧螺母

Sheet spring nuts with tappping screw thread

敏感开关.类型和安装尺寸、连接方式.开关原理

Sensitiv switches; types, mounting dimensions, connection types; switches principle

封闭式风扇冷却三相异步电动机（类型IMB5/10/14）

Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IMB 5, IMB 10, IMB 14, with rolling bearings; mounting dimensions and output ratings

安装美利体育官网首页网址 外形尺寸和相关安装尺寸

Installation equipment dimensions and related installation dimensions

铁路车辆用压缩空气装置.双止回阀.安装和连接尺寸

Compressed air equipment for rail vehicles - Double check valves - Installation and companion dimensions

滚动轴承.径向球形滚柱轴承.第1部分:圆柱形和圆锥孔的单排(鼓形滚柱轴承)

Rolling bearings - Radial spherical roller bearings - Part 1: Single row with cylindrical and tapered bore (Barrel roller bearing)

直线运动滚动轴承 平保持架导轨 尺寸和公差

Linear motion rolling bearings - Flat cage rail guide - Dimensions and tolerances

道路车辆.抗干拢－抑制滤波器.安装和连接尺寸

Road vehicles; interference-suppression filters; dimensions for mounting and connecting

造船用门锁.第3部分:安装尺寸和安装

Door locks used in shipbuilding - Part 3: Fitting dimensions and installation

建筑五金件.控制门的关闭装置.固定尺寸和安装

Building hardware - Controlled door closing devices - Fixing dimensions and installation

锁和建筑配件具有受控关闭过程的门锁装置要求和测试程序

Locks and building fittings – Door locking devices with a controlled closing process – Requirements and testing procedures

建筑五金件.受控门关闭装置.固定尺寸和安装

Building hardware - Controlled door closing devices - Fixing dimensions and installation

国际标准ISO 3661：1977

International Standard ISO 3661:1977

工业阀门——法兰连接管路用金属阀门面到面及中心到中心距离 第2部分：按Class标志的阀门

Industrial valves — Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems — Part 2: Class-designated valves

端吸式离心泵.底板和安装尺寸(ISO 3661-1977).德文版 EN ISO 3661-2010

End-suction centrifugal pumps - Baseplate and installation dimensions (ISO 3661:1977); German version EN ISO 3661:2010

液压动力. 16 MPa（160 bar）系列单活塞杆油缸的安装尺寸. 第1部分: 中型系列（ISO 6020-1: 2007）

Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 1: Medium series (ISO 6020-1:2007)

液压传动 单杆缸安装尺寸, 16 MPa（160 bar）系列 第2部分：紧凑型系列

Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 2: Compact series

液压流体动力 单杆气缸的安装尺寸 16 MPa (160 bar)系列 第2部分:紧凑系列

Hydraulic fluid power – Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series – Part 2: Compact series

液压传动.25MPa(250巴)系列单杆汽缸的安装尺寸

Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series (ISO 6022:2006);English version of DIN ISO 6022:2008-06

液压流体动力 单杆油缸的安装尺寸 25 MPa(250bar)系列

Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series (ISO 6022:2006)

商用车辆和公共汽车.1、2、3 和 4型起动电机的安装尺寸

Commercial vehicles and buses; mounting dimensions for starter motors of types 1, 2, 3 and 4; identical with ISO 7650:1987

液压传动.16MPa(160bar)中型和25MPa(250bar)系列单杆汽缸.附件的安装尺寸

Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Mounting dimensions for accessories (ISO 8132:2006);English version of DIN ISO 8132:2008-06

液压流体动力系统 单杆液压缸附件安装尺寸 16 MPa（160 bar）中等系列和25 MPa（250 bar）系列

Hydraulic fluid power – Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series

液压流体动力 单杆液压缸附件的安装尺寸，16 MPa（160 巴）介质和 25 MPa（250 巴）系列（ISO 8132:2022）

Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series (ISO 8132:2022); Text in German and English

液压流体动力 - 单杆油缸附件安装尺寸，16 MPa (160 bar) 介质和 25 MPa (250 bar) 系列 (ISO 8132:2022)

Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series (ISO 8132:2022); Text in German and English / Note: Date of issue 2023-02-10*Intended as replacement for DIN ISO 8...

液压流体动力 单杆油缸附件安装尺寸 16 MPa (160 bar) 介质和 25 MPa (250 bar) 系列 (ISO 8132:2022)

Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series (ISO 8132:2022)

液压传动.16MP(160bar)紧凑式系列单杆汽缸.附件的安装尺寸

Hydraulic fluid power - Single rod cylinders, 16 MP (160 bar) compact series - Mounting dimensions for accessories (ISO 8133:2006);English version of DIN ISO 8133:2008-06

液压流体动力 单杆液压缸附件的安装尺寸，16 MPa（160 巴）紧凑型系列（ISO 8133:2022）

Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series (ISO 8133:2022); Text in German and English

液压流体动力 - 单杆油缸附件的安装尺寸，16 MPa (160 bar) 紧凑型系列 (ISO 8133:2022)

Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series (ISO 8133:2022); Text in German and English / Note: Date of issue 2023-02-10*Intended as replacement for DIN ISO 8133 (2017-11).

液压流体动力 16 MPa（160 bar）紧凑系列单杆气缸附件安装尺寸（ISO 8133:2022）

Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series (ISO 8133:2022)

液压流体动力 单杆油缸附件的安装尺寸 16 MPa (160 bar) 紧凑型系列 (ISO 8133:2022)

Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series (ISO 8133:2022)

流体技术 压缩空气缸 1000 kPa（10 bar）系列 连接头 接口尺寸

Fluid Technology Compressed Air Cylinders 1000 kPa (10 bar) Series Connector Dimensions

安装式指示和记录电测量仪表的尺寸

Dimensions for panel mounted indicating and recording electrical measuring instruments

电子美利体育官网首页网址机械结构 户外机壳 第2-1部分;机柜尺寸

Mechanical structures for electronic equipment--Outdoor enclosures--Part 2-1:Dimensions for cabinets

土壤耕作机械 旋转式中耕机刀片 安装尺寸

Equipment for working the soil-Rotary cultivator blades-Fixing dimensions

摩托车和轻便摩托车轮毂安装尺寸系列

Series of mounting dimensions for wheel hub of motorcycles and mopeds

气动 缸内径20mm至100mm的紧凑型气缸 基本尺寸、安装尺寸

Pneumatic fluid power.Compact cylinders, bores from 20 mm to 100 mm.Basic dimensions and mounting dimensions

智能电能表外形结构和安装尺寸 第11部分：通用要求

Space and fixing dimensions for smart electricity meter—Part 11: General requirements

液压传动 单杆缸附件的安装尺寸 第1部分：16MPa中型系列和25MPa系列

Hydraulic fluid power—Mounting dimensions for accessories of single rod cylinder—Part 1:16 MPa medium and 25 MPa series

液压传动 单杆缸附件的安装尺寸 第3部分：16 MPa缸径250 mm～500 mm紧凑型系列

Hydraulic fluid power—Mounting dimensions for accessories of single rod cylinder—Part 3: 16 MPa compact series with bores from 250mm to 500mm

商用汽车辐板式车轮在轮毂上的安装尺寸

Disc wheels for trucks.Dimensional characteristics of attachment on hub

旋转电机尺寸和输出功率等级 第1部分;机座号56～400和凸缘号55～1080

Dimensions and output series for rotating electrical machines. Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080

叉车 货叉 尺寸

Forklift Fork Dimensions

滚动轴承 安装尺寸

Rolling bearings-Mounting dimensions

滚动轴承 安装尺寸

Rolling Bearing Installation Dimensions

农林拖拉机和机械 车轮在轮毂上安装尺寸

Tractors and machinery for agriculture and forestry—Wheel-to-hub fixing dimensions

气动 缸径8mm至25mm的单杆气缸 安装尺寸

Pneumatic fluid power—Single rod cylinders,bores from 8 mm to 25 mm—Mounting dimensions

活塞压缩机的单独自动的圆形阀.型式和嵌装尺寸

Selfacting individual values of circular form for piston compressors. Types and fitting dimensions

配水混合器 型式、基本尺寸

Water supply mixing valves and taps. Types and principal dimensions

射灯.类型和安装尺寸

Spotlights. Types and mounting dimensions

液压腔的容量 组成部件尺寸单杆缸附件 系列16兆帕（160巴）中等和25兆帕（250巴）

Hydraulic fluid power — Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series

液压传动. 10 MPa (100 bar) 系列汽缸的安装尺寸

Hydraulic fluid power - Mounting dimensions for cylinders, 10 MPa (100 bar) series

液压传动.10MPa(100 bar)下用的缸径在32 mm 到 100 mm的单杆、短冲程气缸.安装尺寸

Hydraulic fluid power - Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) - Mounting dimensions

液压传动.10MPa(100 bar)下用的缸径在32 mm 到 100 mm的单杆、短冲程气缸.安装尺寸

Hydraulic fluid power - Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) - Mounting dimensions

真空技术.直角阀.气动执行机构的尺寸和接口

Vacuum technology — Right-angle valve — Dimensions and interfaces for pneumatic actuator

液压传动.单杆缸安装尺寸,16 MPa(160 bar)系列.第2部分:小型系列

Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 2: Compact series

液压传动.单杆缸安装尺寸,16 MPa(160 bar)系列.第2部分:小型系列

Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 2: Compact series

液压传动 单杆缸安装尺寸,16 MPa(160 bar)系列 第3部分:缸内径250mm～500mm的小型系列

Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 3: Compact series with bores from 250 mm to 500 mm

液压传动.25 MPa (250 bar)系列单杆缸的安装尺寸

Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series

道路车辆 压燃式发动机的两级燃油滤清器 装配和连接尺寸

Road vehicles; two-stage fuel filters for compression-ignition engines; mounting and connecting dimensions

商用车辆和公共汽车 1、2、3型交流发电机安装尺寸

Commercial vehicles and buses; mounting dimensions for alternators of types 1, 2 and 3

液压传动.16 MPa（160 bar）介质和25 MPa（250 bar）系列单杆液压缸附件的安装尺寸

Hydraulic fluid power — Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series

气压流体动力.1000kPa(10bar)系列汽缸.杆端球眼的安装尺寸

Pneumatic fluid power - Cylinders, 1000 kPa (10 bar) series - Mounting dimensions of rod-end spherical eyes

气压流体动力.1000kPa(10bar)系列汽缸.杆端Ｕ形夹的安装尺寸

Pneumatic fluid power - Cylinders, 1000 kPa (10 bar) series - Mounting dimensions of rod-end clevises

气动传动.10巴(1000kPa)系列气缸.活塞杆U形叉.装配尺寸

Pneumatic fluid power - Cylinders, 1000 kPa (10 bar) series - Mounting dimensions of rod-end clevises

真空技术.管道配件的安装尺寸.第1部分:非刀口法兰型

Vacuum technology - Mounting dimensions of pipeline fittings - Part 1: Non knife-edge flange type

真空技术.管道配件的安装尺寸.第2部分:刀口法兰型

Vacuum technology - Mounting dimensions of pipeline fittings - Part 2: Knife-edge flange type

柴油机 直列式喷油泵 平底托架安装尺寸

Diesel engines Base-mounted in-line fuel injection pumps Mounting dimensions

柴油机 直列式喷油泵 弧形底安装尺寸

Diesel engines Cradle-mounted in-line fuel injection pumps Mounting dimensions

机动车及内燃机用交流发电机 安装尺寸

Installation dimensions of AC generators applied for motor vehicles and interna-combustion engine

颗粒饲料压制机??第3部分:压模安装型式与尺寸

Pellet mill.Part 3: Ring-type die types and dimensions for installation

活塞式和叶片式气动马达 安装尺寸

The dimensions of install pneumatic piston and vane motors

柱塞偶件主要尺寸和安装尺寸

Dimensions for mounting and connection of plunger valve

缸内径32～250mm整体式安装单杆气缸 安装尺寸

Single rod cylinders with integral mountings, bores form 32mm to 250mm. Mounting dimensions

避雷器安装尺寸与接线端子尺寸

Mounting dimensions and terminal dimensions for surge arresters

装配式整体卫生间应用技术标准

Applied Technical Standards for Prefabricated Overall Toilets

滚动轴承.安装尺寸和配合

Rolling bearings -- Mounting dimensions and fits

真空技术.管道配件.装配尺寸

Vacuum technology -- Pipeline fittings -- Mounting dimensions

液压汽缸的安装尺寸.第4部分:单杆.25MPa系列、焊接或螺纹法兰的圆盖型液压气缸(气缸内径50mm～320mm)

Mounting dimensions for hydraulic cylinders -- Part 4 : Single rod -- 25 MPa series, round cover types with welded or threaded flange (Bores from 50 mm to 320 mm)

柴油机 燃油喷射泵的安装尺寸 第2部分：底座安装式直列泵和共轨燃油喷射系统用高压供油泵

Diesel engines -- Mounting dimensions of fuel injection pumps -- Part 2: Base-mounted in-line pumps and high-pressure supply pumps for common rail fuel injection systems

柴油发动机.夹具安装的燃油喷射器的安装尺寸规格

Diesel engines -- Mounting dimensions of clamp mounted CR fuel injectors

汽车零件.商业车辆和公共汽车的交流发电机.安装尺寸

Automotive parts -- Alternators for commercial vehicles and buses -- Mounting dimension

叉车.钩挂型货叉及叉架.安装尺寸规格和结构

Fork lift trucks -- Hook-on type fork arms and fork arm carriages -- Mounting dimensions and construction

液压流体动力 单杆液压缸附件的安装尺寸，16 MPa（160 bar）介质和 25 MPa（250 bar）系列

Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series

液压流体动力.16MPa(160bar)紧凑系列单杆气缸附件安装尺寸

Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series

液压流体动力.16 MPa（160 bar）中型和25 MPa（250 bar）系列单杆气缸附件的安装尺寸

Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series

液压传动装置 - 气缸附件的互换性尺寸，16 Mpa（160 bar）单杆，紧凑型系列

Hydraulic Transmissions - Interchangeability Dimensions of Cylinder Accessories, 16 Mpa (160 bar) Single Rod, Compact Series

汽车变速器总成安装尺寸

Automobile transmission assembly installation dimensions

乘用车辐板式车轮在轮毂上的安装尺寸

Disc wheels for passenger car. Dimensional of attachment on hub

乘用车辐板式车轮在轮毂上的安装尺寸

Installation dimensions of spoked wheels on the hub for passenger cars

端吸离心泵 底板和安装尺寸（ISO 3661:1977）

End-suction centrifugal pumps - Baseplate and installation dimensions (ISO 3661:1977)

液压流体动力 10 MPa

Hydraulic fluid power - Mounting dimensions for cylinders, 10 MPa (100 bar) series (ISO 10762:2015, IDT)

液压功率 单杆缸 16 MPa（160 bar）紧凑系列 孔径从250毫米到500毫米 附件安装尺寸（ISO 13726:2008 等同采用）

Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm - Accessory mounting dimensions (ISO 13726:2008, IDT)

叉车 钩式叉臂和叉臂架 安装尺寸（ISO 2328:2006 IDT）

Fork-lift trucks - Hook-on type fork arms and fork arm carriages - Mounting dimensions (ISO 2328:2006, IDT)

液压功率 单杆缸的安装尺寸 16 MPa（160 bar）系列 第一部分：中系列（等同采用ISO 6020-1:2007）

Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 1: Medium series (ISO 6020-1:2007, IDT)

液压功率 单杆缸安装尺寸 16 MPa（160巴）系列 第2部分：紧凑型系列（等同采用ISO 6020-2:2015）

Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 2: Compact series (ISO 6020-2:2015, IDT)

液压功率 单杆缸安装尺寸 16 MPa（160 bar）系列 第3部分：紧凑系列 孔径从250毫米到500毫米（ISO 6020-3:2015, IDT）

Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 3: Compact series with bores from 250 mm to 500 mm (ISO 6020-3:2015, IDT)

液压传动功率 单杆缸的安装尺寸 25 MPa（250 bar）系列（等同采用ISO 6022:2006）

Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series (ISO 6022:2006, IDT)

气动流体动力 单活塞杆缸 1000 kPa（10 bar）系列 孔径从8毫米到25毫米 基本和安装尺寸（ISO 6432:2015, IDT）

Pneumatic fluid power - Single rod cylinders, 1 000 kPa (10 bar) series, bores from 8 mm to 25 mm - Basic and mounting dimensions (ISO 6432:2015, IDT)

柴油发动机 基座安装直列式燃油喷射泵和共轨燃油喷射系统的高压供给泵 安装尺寸（ISO 7612:2006 IDT）

Diesel engines - Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems - Mounting dimensions (ISO 7612:2006, IDT)

液压油动力 单杆缸附件的安装尺寸 16 MPa（160 bar）介质和25 MPa（250 bar）系列（ISO 8132:2022 等同采用）

Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series (ISO 8132:2022, IDT)

液压功率 单杆缸附件的安装尺寸 16 MPa（160 bar）紧凑系列（ISO 8133:2022 等同采用）

Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series (ISO 8133:2022, IDT)

气动流体动力 缸系列 1000 kPa（10巴） 活塞杆端球形眼的安装尺寸（ISO 8139:2018 等同采用）

Pneumatic fluid power - Cylinders, 1 000 kPa (10 bar) series - Mounting dimensions of rod-end spherical eyes (ISO 8139:2018, IDT)

气动流体动力 缸体 1000 kPa（10巴）系列 活塞杆末端转轴的安装尺寸（ISO 8140:2018 等同采用）

Pneumatic fluid power - Cylinders, 1 000 kPa (10 bar) series - Mounting dimensions of rod-end clevises (ISO 8140:2018, IDT)

YX系列高效高压三相异步电动机（机座号 355~630）

YX series 3-phase asynchronous high-efficiency high voltage motors（Frame size355~630）

端吸式离心泵 底板和安装尺寸（ISO 3661:1977）

End-suction centrifugal pumps - Baseplate and installation dimensions (ISO 3661:1977)

液压流体动力 单杆油缸附件安装尺寸 16 MPa (160 bar) 中型和 25 MPa (250 bar) 系列

Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series

液压流体动力 单杆油缸附件的安装尺寸 16 MPa (160 bar) 紧凑型系列

Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series