美利体育登录入口官网

ISO极限与配合制 孔和轴的标准公差等级和极限偏差表

ISO system of limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts

产品几何规范 (GPS) — 线性尺寸公差 ISO 代码系统 第2部分：孔和轴的标准公差等级和极限偏差表

Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes Part 2 : Tables of standard tolerance classes and limit deviations for holes and shafts

施工图——极限偏差的指示

Construction drawings — Indication of limit deviations

固结磨具产品 极限偏差和跳动公差

Bonded abrasive products. Limit deviations and run-out tolerances

精密超硬材料.金刚石或立方氮化硼砂轮的极限偏差和跳动误差

Precision superabrasives. Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride

涂附磨具 砂轮

Coated abrasives. Abrasive rolls

ISO 通用公制螺纹 公差 螺纹极限偏差

ISO general purpose metric screw threads. Tolerances. Limit deviations for screw threads

实验室玻璃器皿 可互换的锥形磨口接头、尺寸、公差

Laboratory glassware - Interchangeable conical ground joints, dimensions, tolerances

铁路车辆用带间隙的单头和双头爱克米螺纹 第3部分：螺纹量规 螺纹量规的螺纹尺寸和允许磨损

Single- and double-start acme thread with clearance for rail vehicles - Part 3: Thread gauges; Thread dimensions and permissible wear of thread gauge

搅拌容器的公差和极限偏差 第 1 部分：金属材料搅拌容器

Tolerances and limit deviations for agitator vessels - Part 1: Agitator vessels of metallic materials

搅拌船的公差和极限偏差.第1部分:金属材料搅拌船

Tolerances and limit deviations for agitator vessels - Part 1: Agitator vessels of metallic materials

管式热交换器制造的公差

Tolerances for tubular heat exchangers

管式热交换器制造的公差

Tolerances for tubular heat exchangers

容器和处理美利体育官网首页网址法兰连接 第2部分;法兰尺寸公差

Flanged joints for vessels and process apparatus - Part 2: Tolerances on flange dimensions

工艺容器法兰接头.第2部分:法兰的极限偏差

Flange joints for process vessels - Part 2: Limit deviations for flanges

过程容器法兰接头 - 第 2 部分：法兰的极限偏差

Flange joints for process vessels - Part 2: Limit deviations for flanges

锻镍和锻镍合金冷轧薄板.尺寸及尺寸与形状公差

Sheet of wrought nickel and wrought nickel alloys, cold rolled - Dimensions and tolerances on dimensions and form

冷轧锻制镍和锻制镍合金拉直带材截面的带材和板材 尺寸和尺寸和形状公差

Strip and sheet of straightened strip sections of wrought nickel and wrought nickel alloys, cold rolled - Dimensions and tolerances on dimensions and form

热轧的可锻镍和可锻镍合金圆棒.尺寸和形式的尺寸和公差

Round bars of wrought nickel and wrought nickel alloys, hot rolled - Dimensions and tolerances on dimensions and form

热轧锻制镍和锻制镍合金圆棒 尺寸和尺寸和形状公差

Round bars of wrought nickel and wrought nickel alloys, hot rolled - Dimensions and tolerances on dimensions and form

热轧锻制镍和锻制镍合金方棒 尺寸和尺寸和形状公差

Square bars of wrought nickel and wrought nickel alloys, hot rolled - Dimensions and tolerances on dimensions and form

热轧的可锻镍和可锻镍合金矩形棒. 尺寸规格及尺寸和形状公差

Rectangular bars of wrought nickel and nickel alloys, hot rolled - Dimensions and tolerances on dimensions and form

热轧锻制镍和镍合金矩形棒 尺寸及尺寸和形状公差

Rectangular bars of wrought nickel and nickel alloys, hot rolled - Dimensions and tolerances on dimensions and form

拉制可锻镍和镍合金方形棒材.尺寸及尺寸和形状公差

Square bars of wrought nickel and wrought nickel alloys, drawn - Dimensions and tolerances on dimensions and form

锻制镍和锻制镍合金方棒 拉制 尺寸和尺寸和形状公差

Square bars of wrought nickel and wrought nickel alloys, drawn - Dimensions and tolerances on dimensions and form

拉制可锻镍和镍合金带锐边的矩形棒.尺寸及尺寸和形状公差

Rectangular bars of wrought nickel and wrought nickel alloys, drawn with sharp edges - Dimensions and tolerances on dimensions and form

包装方法.玻璃瓶和凹形器皿.第1部分:自动化生产出的瓶子的一般公差

Means of packaging - Bottles and hollow-ware from glass - Part 1: General tolerances for automatic produced bottles

离合器衬片.尺寸和公差

Clutch facings - Dimensions and tolerances

管道用 CuNi10Fe1,6Mn 焊管 尺寸

Welded tubes made of CuNi10Fe1,6Mn for pipes - Dimensions

一般用途热轧方形钢棒.尺寸及形状和尺寸公差

Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions; German version EN 10059:2003

热轧圆钢尺寸及形状和尺寸公差

Hot rolled round steel bars - Dimensions and tolerances on shape and dimensions; German version EN 10060:2003

热轧球头扁钢.尺寸和形状、尺寸、质量公差

Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass; German version EN 10067:1996

非合金和细晶粒结构钢的热精加工空心结构型材.第2部分:公差、尺寸和截面特性

Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties; English version of DIN EN 10210-2:2006-07

热加工钢结构空心型材 第2部分：公差、尺寸和截面性能

Hot finished steel structural hollow sections - Part 2: Tolerances, dimensions and sectional properties; German version EN 10210-2:2019

非合金结构钢和细晶粒结构钢的冷成形结构空心型材 第2部分：公差、尺寸和分段性能（草案）

Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties

非合金钢和细晶粒钢冷成型焊接结构空心型材 第2部分：公差、尺寸和截面性能

Cold formed welded structural hollow sections of non-alloy and fine grain steels — Part 2: Tolerances, dimensions and sectional properties

非合金结构钢和细晶粒结构钢的冷成形结构空心型材.第2部分:公差、尺寸和分段性能

Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties; English version of DIN EN 10219-2:2006-07

冷成型焊接钢结构空心型材 第2部分：公差、尺寸和截面特性

Cold formed welded steel structural hollow sections - Part 2: Tolerances, dimensions and sectional properties

冷弯焊接钢结构空心型材第2部分：公差、尺寸和截面性能

Cold formed welded steel structural hollow sections - Part 2: Tolerances, dimensions and sectional properties; German version EN 10219-2:2019

非合金钢热轧板桩 第2部分：外形和尺寸公差（草案）

Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions

非合金钢冷成型板桩 第2部分：外形和尺寸公差（草案）

Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions

铝和铝合金.拉制钢丝.第3部分:尺寸公差.英文版本DIN EN 1301-3-2008

Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions; English version of DIN EN 1301-3:2008-12

铝和铝合金.拉制线材.第3部分:尺寸公差;德文版 EN 1301-3:2008

Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions; German version EN 1301-3:2008

铝和铝合金.箔.第3部分:尺寸公差

Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions; English version of DIN EN 546-3:2007-03

铝和铝合金.铸锻毛坯.第2部分:尺寸和形状公差

Aluminium and aluminium alloys - Cast forging stock - Part 2: Tolerances on dimensions and form; German version EN 604-2:1997

热电偶 第1部分：EMF 规格和公差

Thermocouples - Part 1: EMF specifications and tolerances (IEC 60584-1:2013); German version EN 60584-1:2013 / Note: DIN EN 60584-1 (1996-10), DIN EN 60584-1 Berichtigung 1 (1998-06) and DIN EN 60584-2 (1994-10) remain valid alongside this standard unt...

热电偶.第3部分:延长电缆和补偿电缆.公差和识别系统

Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system (IEC 60584-3:2007); German version EN 60584-3:2008

工业铂电阻温度计和铂测量电阻

Industrial platinum resistance thermometers and platinum measuring resistors

工业铂电阻温度计和铂温度传感器

Industrial platinum resistance thermometers and platinum temperature sensors (IEC 60751:2008); German version EN 60751:2008

铝和铝合金.冷拉杆材/棒材和管材.第6部分:六角形棒材的尺寸和形状公差

Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form; English version of DIN EN 754-6:2008-06

铝和铝合金.冷拉杆材/棒材和管材.第8部分:带孔管材的尺寸和形状公差.德文版本EN 754-8-2016

Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form; German version EN 754-8:2016

铝和铝合金.挤压杆材/棒材、管材和型材.第3部分:圆棒材的尺寸和形状公差

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form; English version of DIN EN 755-3:2008-06

眼科仪器.眼睛折射计(ISO 10342-2010).德文版本EN ISO 10342-2010

Ophthalmic instruments - Eye refractometers (ISO 10342:2010); German version EN ISO 10342:2010

建筑玻璃 夹层玻璃和夹层安全玻璃 第5部分：尺寸和边缘处理（草案）

Architectural glass Laminated glass and laminated safety glass Part 5: Dimensions and edge treatments (draft)

玻璃包装 瓶子的标准公差

Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013); German version EN ISO 12818:2015

眼科光学.隐形眼镜.第2部分:公差(ISO 18369-2-2012).德文版本EN ISO 18369-2-2012

Ophthalmic optics - Contact lenses - Part 2: Tolerances (ISO 18369-2:2012); German version EN ISO 18369-2:2012

几何产品特殊要求（GPS） ISO长度公差系统 第2部分：孔和轴的基本公差等级与极限尺寸表 (ISO 286-2:2010 + Cor 1:2013)

Particular requirements for geometrical products (GPS) ISO length tolerance system Part 2: Basic tolerance grades and limit size tables for holes and shafts (ISO 286-2:2010 + Cor 1:2013)

产品几何量技术规范(GPS)-ISO线性尺寸公差代码体系.第2部分:孔和轴的标准公差等级和极限偏差表(ISO 286-2-2010);德文版本EN ISO 286-2-2010

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010); German version EN ISO 286-2:2010

几何产品规范（GPS） 线性尺寸公差的 ISO 代码系统 第2部分：孔和轴的标准公差等级和极限偏差表（ISO 286-2:2010 + Cor 1:2013）（包括勘误表：2013）

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013) (includes Corrigendum :2013)

产品几何规范(GPS)线性尺寸公差的 ISO 代码系统 第2部分：孔和轴的标准公差等级和极限偏差表

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013); German version EN ISO 286-2:2010 + AC:2013

技术产品文件 施工文件 极限偏差指示（ISO 6284:2023）

Technical product documentation - Construction documentation - Indication of limit deviations (ISO 6284:2023); German and English version prEN ISO 6284:2023

技术产品文件 施工文件 极限偏差指示（ISO 6284:2023）；德语和英语版本 prEN ISO 6284:2023 / 注：发布日期 2023-09-15*旨在替代 DIN ISO 6284 (1997-09)

Technical product documentation - Construction documentation - Indication of limit deviations (ISO 6284:2023); German and English version prEN ISO 6284:2023 / Note: Date of issue 2023-09-15*Intended as replacement for DIN ISO 6284 (1997-09).

粘合磨料产品-极限偏差和跳动公差

Bonded abrasive products - Limit deviations and run-out tolerances

粘合磨料产品.限制偏差和跳动误差

Bonded abrasive products - Limit deviations and run-out tolerances (ISO 13942:2000)

粘合磨料产品-极限偏差和跳动公差(ISO 13942-2019)

Bonded abrasive products - Limit deviations and run-out tolerances (ISO 13942:2019)

固结磨料产品 极限偏差和跳动公差

Bonded abrasive products - Limit deviations and run-out tolerances (ISO 13942:2019)

纺织机械.矩形条筒.主要尺寸规格和公差(ISO 16853-2010)

Textile machinery - Sliver cans, rectangular - Main dimensions and tolerances (ISO 16853:2010)

精密超硬材料 金刚石或立方体氮化硼砂轮的极限偏差和跳动误差

Precision superabrasives - Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride

超磨料.金刚石或立方体氮化硼砂轮的极限偏差和跳动误差

Superabrasives - Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride (ISO 22917:2004)

砂带 宽度/长度组合的选择

Coated abrasives – Abrasive belts – Selection of width/length combinations

涂附磨料 带一体式法兰或分离式法兰的百叶轮

Coated abrasives - Flap wheels with incorporated flanges or separate flanges

ISO 一般用途米制螺纹.公差.第2部分:结构螺纹的偏差

ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional threads (ISO 965-3:1998)

ISO 通用公制螺纹 公差 第3部分：结构螺纹偏差

ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional threads (ISO 965-3:1998) / Note: To be replaced by DIN ISO 965-3 (2021-01).

ISO 通用公制螺纹 公差 第3部分：螺纹的极限偏差

ISO general purpose metric screw threads - Tolerances - Part 3: Limit deviations for screw threads (ISO/DIS 965-3:2020); Text in German and English / Note: Date of issue 2020-12-04*Intended as replacement for DIN ISO 965-3 (1999-11).

ISO 通用公制螺纹 公差 第4部分：热浸镀锌外螺纹与镀锌后公差位置为 H 或 G 的内螺纹配合的尺寸限制（ISO/DIS 965-4:2020）；德语文本

ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (ISO/DIS 965-4:2020); Text in German

ISO 通用公制螺纹 公差 第4部分：热浸镀锌外螺纹与镀锌后公差位置 H 或 G 攻丝的内螺纹的尺寸限制

ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (ISO/DIS 965-4:2020); Text in Germ...

纺织工业环境保护设施设计标准

Design standard for environmental protection facilities of textile industry

金属阀门 结构长度

Metal valves-Face to face,end to end,center to face and center to end dimensions

产品几何技术规范(GPS).木制件.极限与配合

Geometrical Product Specifications(GPS).Wooden part.Limit and fit

涂附磨具 砂页

Coated abrasives-Plain sheets

圆柱形轴伸

Cylindrical shaft ends

产品几何技术规范（GPS） 线性尺寸公差ISO代号体系 第1部分：公差、偏差和配合的基础

Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 1: Basis of tolerances, deviations and fits

产品几何技术规范（GPS） 线性尺寸公差ISO代号体系 第2部分：标准公差带代号和孔、轴的极限偏差表

Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

同步带传动 T型梯形齿同步带

Synchronous belt drives—Belts with T trapezoidal profile system

银基电触头基本形状、尺寸、符号及标注

Basic shapes, dimensions, symbols and notations of silver based electrical contacts

旋转电机 圆柱形轴伸

Cylindrical shaft extension for rotating electrical machines

丝锥螺纹公差

Tap Thread Tolerance

弯钢型材 C 形 等边法兰 品种

Roll-formed bent C-shaped equal flange steel profiles. Dimensions

照相排版用卷筒胶片尺寸

Photography-Film dimensions-Rolls for photocomposition

产品几何规范（GPS） ISO 线性尺寸公差编码系统 第2部分：标准化公差等级表及孔和轴极限偏差

Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes. Part 2 - Tables of standard tolerances classes and limit deviations for holes and shafts.

粘合磨料产品 极限偏差和偏转公差

Bonded abrasive products - Limit deviations and run-out tolerances

产品几何技术规范(GPS).线性尺寸的容许公差用ISO编码系统.第2部分:孔、轴的标准公差等级表和极限偏差表

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

砂布.研磨页轮

Coated abrasives - Flap wheels with shaft

建筑工程制图 公差限值表示法

Construction drawings - Indication of limit deviations

技术产品文件 施工文件 极限偏差指示

Technical product documentation — Construction documentation — Indication of limit deviations

汽车零件用一般公差技术规范

General principles of general tolerances for automotive parts

汽车切削加工零件未注公差尺寸的极限偏差

Permissible cutting parts variations in dimensions without tolerance indication

汽车冷冲压加工零件未注公差尺寸的极限偏差

Permissible automobile cold stamping variations in dimensions without tolerance indication

汽车模制塑料零件未注公差尺寸的极限偏差

Permissible automotive molded plastic parts variations in dimensions without tolerance indication

机床夹具零件及部件 Ⅰ型加长快换钻套

Machine Tool Fixture Parts and Components Type I Extended Quick Change Drill Bushing

几何产品规格(GPS) 公差用于线性尺寸的ISO代码系统 第1部分：公差、偏差和配合基础(ISO 286-1:2010)

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Bases of tolerances, deviations and fits (ISO 286-1:2010)

几何产品规格（GPS） 公差的线性尺寸国际代码系统 第2部分：孔和轴的标准公差等级及极限偏差表（ISO 286-2:2010）

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)

涂敷磨具 磨带 宽度/长度组合的选择（ISO 2976:2005, IDT）

Coated abrasives - Abrasive belts - Selection of width/length combinations (ISO 2976:2005, IDT)

涂敷磨料产品 磨砂滚筒

Coated abrasive products - Abrasive rolls

普通用途的公制螺纹 偏差 第3部分：螺纹的极限偏差（ISO 965-3:2021 等同采用）

ISO general purpose metric screw threads — Tolerances — Part 3: Limit deviations for screw threads (ISO 965-3:2021, IDT)

机车车辆用曲面卡套式管接头.第4部分:橡胶密封环

Curved-face bayonet ring couplings for rolling stock Part 4: Aubber sealing rings