美利体育登录入口官网

普通ISO米制螺纹 第1部分：粗牙螺纹的标称尺寸 螺纹标称直径1--68mm

ISO general purpose metric screw threads - Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mm

ISO一般用途米制螺纹.第2部分:螺距0.2mm、0.25mm和0.35mm的细牙螺纹的标称尺寸.螺纹标称直径1--50mm

ISO general purpose metric screw threads - Part 2: Nominal sizes for 0,2 mm, 0,25 mm and 0,35 mm fine pitch threads; nominal diameter from 1 mm to 50 mm

ISO 通用公制螺纹 第2部分：0.2 毫米、0.25 毫米和 0.35 毫米细牙螺纹的标称尺寸

ISO general purpose metric screw threads - Part 2: Nominal sizes for 0,2 mm, 0,25 mm and 0,35 mm fine pitch threads; nominal diameter from 1 mm to 50 mm

ISO一般用途米制螺纹.第3部分:螺距0.5mm的细牙螺纹的标称尺寸.螺纹标称直径3--90mm

ISO general purpose metric screw threads - Part 3: Nominal sizes for 0,5 mm fine pitch threads; nominal diameter from 3,5 mm to 90 mm

ISO 通用公制螺纹 第3部分：0.5mm 细牙螺纹的标称尺寸

ISO general purpose metric screw threads - Part 3: Nominal sizes for 0,5 mm fine pitch threads; nominal diameter from 3,5 mm to 90 mm

ISO一般用途米制螺纹.第50部分:成型内螺纹用公差等级

ISO general purpose metric screw threads - Part 50: Combination of tolerance classes for formed internal screw threads

ISO一般用途米制螺纹.第50部分:成型内螺纹用公差等级

ISO general purpose metric screw threads - Part 50: Combination of tolerance classes for formed internal screw threads

ISO一般用途米制螺纹 第52部分：多头螺纹用公差和齿形偏差

ISO general purpose metric screw threads - Part 52: Multi-start thread tolerances and deviation of profile

ISO一般用途米制螺纹.第6部分:螺距1.5mm的细牙螺纹的标称尺寸.螺纹标称直径12--300mm

ISO general purpose metric screw threads - Part 6: Nominal sizes for 1,5 mm fine pitch threads; nominal diameter from 12 mm to 300 mm

ISO 通用公制螺纹 第6部分：1.5mm 细牙螺纹的标称尺寸

ISO general purpose metric screw threads - Part 6: Nominal sizes for 1,5 mm fine pitch threads; nominal diameter from 12 mm to 300 mm

普通ISO米制螺纹.第8部分:螺距3mm的细牙螺纹的标称尺寸.螺纹标称直径28--300mm

ISO general purpose metric screw threads - Part 8: Nominal sizes for 3 mm fine pitch threads; nominal diameter from 28 mm to 300 mm

产品几何量技术规范(GPS).ISO米制螺纹测量仪器用螺纹量规.直径1mm～100mm标称螺纹直径的定位塞规和定位环规

Geometrical product specifications (GPS) - Thread setting gauges for measuring instruments for ISO metric screw threads; setting plug gauges and setting ring gauges from 1 mm to 100 mm nominal thread diameter

产品几何规范（GPS）- ISO 公制螺纹测量仪器用螺纹设定规

Geometrical product specifications (GPS) - Thread setting gauges for measuring instruments for ISO metric screw threads; setting plug gauges and setting ring gauges from 1 mm to 100 mm nominal thread diameter

几何产品规范(GPS).螺纹公称直径1mm至40mm的ISO通用公制螺纹的过端和不过端螺纹塞规

Geometrical Product Specifications (GPS) - "GO" and "NOT GO" screw plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter

产品几何规范(GPS)用于 ISO 公制螺纹的“GO”螺纹环规 第1部分：公称直径从 1 毫米到 200 毫米 通用

Geometrical product specifications (GPS) - "GO" screw ring gauges for ISO metric screw threads - Part 1: Nominal diameter from 1 mm up to 200 mm, general purpose

产品几何量技术规范.ISO米制螺钉螺纹不过端环规.第1部分:公称直径为1至200mm.通用

Geometrical Product Specification (GPS) - NOT GO screw ring gauges for ISO metric screw threads - Part 1: Nominal diameter from 1 mm up to 200 mm; General purposes

米制ISO普通螺纹M3至M68用螺母丝锥

Machine nut taps for coarse pitch metric ISO-threads M3 to M68

米制粗螺距ISO螺纹M1至M10和米制细螺距ISO螺纹M1×0.2至M10×1.25带加强柄的机器丝锥

Machine taps with reinforced shank for coarse pitch metric ISO-threads M1 to M10 and fine pitch metric ISO-threads M1 × 0,2 to M10 × 1,25

米制粗螺距ISO螺纹M1,6至M68机器丝锥

Machine screwing taps for coarse pitch metric ISO-threads M1,6 to M68

米制粗螺距ISO螺纹M1,6至M68机器丝锥

Machine screwing taps for coarse pitch metric ISO-threads M1,6 to M68

符合DIN 13-1的ISO米制螺纹的螺纹尾部和螺纹切槽

Thread run-outs and thread undercuts - Part 1: For ISO metric threads in accordance with DIN 13-1

螺纹尾端和螺纹退刀槽 第1部分：适用于符合 DIN 13-1 的 ISO 公制螺纹

Thread run-outs and thread undercuts - Part 1: For ISO metric threads in accordance with DIN 13-1 / Note: To be replaced by DIN 267-27 (2022-12).

螺栓尾部的凸度

Protrusions of bolt ends

螺栓尾部的凸度

Protrusions of bolt ends

低头内六角圆柱头螺钉，降低负载能力

Hexagon socket head cap screws with low head with reduced loadability

ISO米制螺纹用钢丝螺纹嵌镶件 第1部分：尺寸和技术规范

Wire thread inserts for ISO metric screw threads - Part 1: Dimensions, technical specifications

ISO米制螺纹用钢丝螺纹嵌入件 第2部分:嵌入件用螺旋线圈螺纹 螺纹公差

Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances

ISO米制螺纹.铝铸造合金的过盈配合用粗牙和细牙螺纹.标称直径5mm至16mm.内螺纹和外螺纹量规

ISO-metric screw threads; coarse pitch threads and fine pitch threads for interference fits in aluminium cast alloys; nominal diameter from 5 mm to 16 mm; gauges for internal and external threads

ISO通用米制螺纹.量规和量规检验

ISO general purpose metric screw threads - Gauges and gauging (ISO 1502:1996)

ISO一般用途米制螺纹.一般示意图（ISO 261-1998)

ISO general purpose metric screw threads - General plan (ISO 261:1998)

ISO 通用公制螺纹 总图

ISO general purpose metric screw threads - General plan (ISO 261:1998)

ISO一般用途米制螺纹.螺钉、螺栓和螺母的选用尺寸（ISO 262-

ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO 262:1998)

ISO 通用公制螺纹 螺钉、螺栓和螺母的选定尺寸

ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO 262:1998) / Note: To be replaced by DIN ISO 262 (2022-11).

ISO一般用途米制螺纹.基本牙形.第1部分:米制螺纹

ISO general purpose metric screw threads - Basic profil - Part 1: Metric screw threads (ISO 68-1:1998)

ISO一般用途米制螺纹.基本尺寸规格(ISO 724-1993 + Cor. 1-2009)

ISO general-purpose metric screw threads - Basic dimensions (ISO 724:1993 + Cor. 1:2009)

ISO 通用公制螺纹 基本尺寸

ISO general purpose metric screw threads - Basic dimensions (ISO 724:1993 + Cor. 1:2009) / Note: To be replaced by DIN ISO 724 (2022-11).

ISO 通用公制螺纹 公差 第2部分：通用外螺纹和内螺纹的尺寸限制

ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads; medium quality (ISO 965-2:1998), Corrigendum to DIN ISO 965-2:1999-11

ISO一般用途米制螺纹.公差.第2部分:一般用途的内螺纹和外螺纹的尺寸极限.中等质量

ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads; medium quality (ISO 965-2:1998)

ISO 通用公制螺纹 公差 第2部分：通用外螺纹和内螺纹的尺寸限制

ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads; medium quality (ISO 965-2:1998) / Note: To be amended by DIN ISO 965-2/A1 (2021-01).

ISO 公制螺纹用磨削螺纹丝锥 公差为 4H 至 8H 和 4G 至 6G 粗螺距和细螺距 螺纹部分的制造公差

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches - Manufacturing tolerances on the threaded portion