美利体育登录入口官网

测量放射性活动 发射伽马射线和β射线的放射源 表面污染去除难易程度的测试方法

Measurement of radioactivity — Gamma ray and beta emitting radionuclides — Test method to assess the ease of decontamination of surface materials

航空航天系列.试验方法.钛和钛合金.表面污染测定

Aerospace series - Test methods - Titanium and titanium alloys - Determination of surface contamination

表面化学分析 来自X射线光电子能谱测量扫描的近实时信息 含碳化合物表面污染的识别和校正规则

Surface chemical analysis. Near real-time information from the X-ray photoelectron spectroscopy survey scan. Rules for identification of, and correction for, surface contamination by carbon-containing compounds

放射性测量 表面污染的测量和评价 第1部分：一般原则

Measurement of radioactivity — Measurement and evaluation of surface contamination Part 1 : General principles

放射性的测量. 表面污染的测量和评价. 利用擦拭试验样品的试验方法

Measurement of radioactivity. Measurement and evaluation of surface contamination. Test method using wipe-test samples

放射性测量 表面污染的测量和评价 第3部分：仪器校准

Measurement of radioactivity — Measurement and evaluation of surface contamination Part 3 : Apparatus calibration

放射性同位素实验室.第5部分:表面去污规则

Radioisotope laboratories - Part 5: Rules for the decontamination of surfaces

放射性同位素实验室 第5部分：表面净化规则

Radioisotope laboratories - Part 5: Rules for the decontamination of surfaces

放射性同位素实验室 第5部分：表面去污染规则

Radioisotope laboratories - Part 5: Rules for the decontamination of surfaces

在异常条件下要求辐射防护措施的车辆及其装载物表面污染度的测量

Measurements of surface contamination on vehicles and their loadings in exceptional situations requiring radiation protection measures

在异常条件下要求辐射防护措施的车辆及其装载物表面污染度的测量

Measurements of surface contamination on vehicles and their loadings in exceptional situations requiring radiation protection measures

航空航天系列.试验方法.钛和钛合金.第009部分:表面污染物的测定

Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination; German and English version EN 2003-009:2007

航空航天系列试验方法钛及钛合金第009部分：表面污染的测定

Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination; German and English version EN 2003-009:2007

气空系列 钛 TI-P99003 级别2 回火 锻件和模锻件 D<150 mm

Air-air Titanium TI-P99003 Grade 2 Tempered Forgings and Die Forgings D

放射性测量.表面污染的测量和评价.第1部分:通用原则(ISO 7503-1-2016)

Measurement of radioactivity - Measurement and evaluation of surface contamination - Part 1: General principles (ISO 7503-1:2016)

放射性测量 表面污染的测量和评估

Measurement of radioactivity – Measurement and evaluation of surface contamination

放射性测量.表面污染的测量和评价.第2部分:利用擦拭试验样品的试验方法(ISO 7503-2-2016)

Measurement of radioactivity - Measurement and evaluation of surface contamination - Part 2: Test method using wipe-test samples (ISO 7503-2:2016)

放射性测量 表面污染的测量和评估

Measurement of radioactivity – Measurement and evaluation of surface contamination

放射性测量 表面污染的测量和评估

Measurement of radioactivity – Measurement and evaluation of surface contamination

光学和光子学 环境试验方法 第12部分：污染

Optics and photonics - Environmental test methods - Part 12: Contamination

光学和光学仪器.环境试验方法.第12部分:污染

Optics and optical instruments - Environmental test methods - Part 12: Contamination (ISO 9022-12:1994)

光学和光子学 环境试验方法 第17部分：组合污染与太阳辐射试验

Optics and photonics - Environmental test methods - Part 17: Combined contamination, solar radiation

光学和光学仪器.环境试验方法.第17部分:组合污染与太阳辐射试验

Optics and optical instruments - Environmental test methods - Part 17: Combined contamination, solar radiation (ISO 9022-17:1994)

腐蚀防护中钢构涂层前表面美利体育登录入口官网 表面非视觉可识别污染的美利体育登录入口官网

Surface inspection of steel structures before coating in corrosion protection Detection of non-visually identifiable contamination on the surface

放射性厂房表面污染测量方法

Method for measuring surface contamination of radioactive factory buildings

航空航天系列的试验方法.钛和钛合金.第009部分:表面污染测定

Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination

表面污染测定 第1部分: β发射体(Eβmax>0.15MeV)和α发射体

Determination of Surface Contamination Part 1: Beta Emitters (Eβmax>0.15MeV) and Alpha Emitters

拟再循环、再利用或作非放射性废物处置的固体物质的放射性活度测量

Activity measurements of solid materials considered for recycling re-use,or disposal as non-radioactive waste

离子感烟火灾探测器放射防护标准

Radiological protection standards for ionization smoke fire detectors

放射性测量 发射γ射线和β射线的放射性核素 评估表面材料去污难易程度的试验方法

Measurement of radioactivity — Gamma ray and beta emitting radionuclides — Test method to assess the ease of decontamination of surface materials

拟再循环、再使用或作非放射性废物处置的固体物质放射性活度的测量

Activity measurements of solid materials considered for recycling, re-use, or disposal as non-radioactive waste

表面化学分析.样品处理前分析

Surface chemical analysis - Handling of specimens prior to analysis

放射性测量 表面污染的测量和评价 第1部分：一般原则

Measurement of radioactivity — Measurement and evaluation of surface contamination — Part 1: General principles

表面污染评价 第3部分:同质异能跃迁和电子俘获发射体、低能β发射体(最大β能量小于0.15MeV)

Evaluation of surface contamination - Part 3: Isomeric transition and electron capture emitters, low energy beta-emitters (<(Index)max> 0,15 MeV)

放射性测量. 表面污染的测量和评价. 第3部分: 仪器标定

Measurement of radioactivity - Measurement and evaluation of surface contamination - Part 3: Apparatus calibration

放射性测量 表面污染的测量和评价 第3部分：仪器校准

Measurement of radioactivity — Measurement and evaluation of surface contamination — Part 3: Apparatus calibration

放射性测量——γ射线和β发射放射性核素——评估表面材料去污难易程度的试验方法

Measurement of radioactivity — Gamma ray and beta emitting radionuclides — Test method to assess the ease of decontamination of surface materials

航空航夭系列 试验方法 钛及钛合金 第009部分：表面污染测定

Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination

放射性测量 发射伽马射线和β射线的放射性核素 评估表面材料去污难易程度的试验方法

Measurement of radioactivity - Gamma ray and beta emitting radionuclides - Test method to assess the ease of decontamination of surface materials

表面污染的评估.第3部分:同质异能跃迁和电子俘获发射器，低能量β发射器(Eβ最大值不超过0,15MEV)

Evaluation of surface contamination. Part 3 : isomeric transition and electron capture emitters, low energy beta-emitters (E beta max inferior to 0,15 MeV).

放射性测量 发射伽马射线和β射线的放射性核素 评估表面材料去污难易程度的试验方法

Measurement of radioactivity - Gamma ray and beta emitting radionuclides - Test method to assess the ease of decontamination of surface materials

奥氏体耐腐蚀钢零件热处理

Heat Treatment Austenitic Corrosion-Resistant Steel Parts

航空航天系列 试验方法 钛及钛合金 第009部分：表面污染的测定

Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination

放射性测量 表面污染的测量与评价 第2部分：使用擦拭样本的试验方法（ISO 7503-2:2016 等同）

Measurement of radioactivity - Measurement and evaluation of surface contamination - Part 2: Test method using wipe-test samples (ISO 7503-2:2016, IDT)

放射性测量 表面污染的测量与评价 第3部分：仪器校准（ISO 7503-3:2016 修正版2018-02-15 等同采用）

Measurement of radioactivity - Measurement and evaluation of surface contamination - Part 3: Apparatus calibration (ISO 7503-3:2016, Corrected version 2018-02-15, IDT)

放射性测量 发射γ射线和β射线的放射性核素 表面材料去污染难易程度的试验方法（ISO 8690:2020 等同）

Measurement of radioactivity - Gamma ray and beta emitting radionuclides - Test method to assess the ease of decontamination of surface materials (ISO 8690:2020, IDT)

放射性测量 发射伽马射线和β射线的放射性核素 表面材料去污难易程度试验方法（ISO 8690:2024 等同）

Measurement of radioactivity — Gamma ray and beta emitting radionuclides — Test method to assess the ease of decontamination of surface materials (ISO 8690:2024, IDT)

放射性测量 发射伽马射线和贝塔射线的放射性核素 评估表面材料去污难易程度的测试方法

Measurement of radioactivity - Gamma ray and beta emitting radionuclides - Test method to assess the ease of decontamination of surface materials

便携式污染监测美利体育官网首页网址的重复检验

Periodic testing of portable contamination monitoring assemblies

放射性测量 表面污染的测量和评估 第 1 部分：一般原则 (ISO 7503-1:2016)

Measurement of radioactivity - Measurement and evaluation of surface contamination - Part 1: General principles (ISO 7503-1:2016)

放射性测量 表面污染的测量和评估 第 2 部分：使用擦拭测试样品的测试方法（ISO 7503-2:2016）

Measurement of radioactivity - Measurement and evaluation of surface contamination - Part 2: Test method using wipe-test samples (ISO 7503-2:2016)

放射性测量 表面污染的测量和评估 第 3 部分：美利体育官网首页网址校准（ISO 7503-3:2016）

Measurement of radioactivity - Measurement and evaluation of surface contamination - Part 3: Apparatus calibration (ISO 7503-3:2016)