美利体育登录入口官网

用于将交通标志物粘结到硬化波特兰水泥和沥青混凝土表面的环氧树脂粘合剂的标准测试方法

Standard Method of Test for Epoxy Resin Adhesives for Bonding Traffic Markers to Hardened Portland Cement and Asphalt Concrete

资格评定后安装粘结锚固件在混凝土中的应用（ACI 355.4-19）及注释

Application of Post-Qualification Bonded Anchors in Concrete (ACI 355.4-19) and Commentary

纪念 Khaled Soudki 使用纤维增强聚合物复合材料实现可持续基础设施的研讨会

A Symposium Honoring Khaled Soudki Towards Sustainable Infrastructure with Fiber Reinforced Polymer Composites

瓷砖 水泥浆和粘合剂 粘合剂的术语 定义和规范

Ceramic tiles - Grouts and adhesives - Terms, definitions and specifications for adhesives

胶合板和层压板的试验方法 层压板嵌接的结合质量和强度

Methods of test for veneer and plywood - Bond quality and strength of scarf joints in plywood

使用梁端试件比较钢筋棒和混凝土的粘结强度的标准试验方法

Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens

用于评估0.600英寸粘结强度的标准测试方法[15.24毫米]直径钢预应力绞线 270级[1860] 未涂覆 用于预应力地锚

Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors

粘合新鲜硬化混凝土的胶乳剂标准规范

Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete

砌体抗弯粘结强度测量的标准试验方法

Standard Test Methods for Measurement of Masonry Flexural Bond Strength

混凝土表面拉伸强度的标准试验方法和直接拉伸（拉拔法）混凝土修补和覆盖材料的粘结强度或拉伸强度

Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)

评定混凝土修补和覆盖灰浆的附着力（剥离）强度的标准试验方法

Standard Test Method for Evaluating the Adhesion (Pull-Off) Strength of Concrete Repair and Overlay Mortar

用直接拉伸法测量硅酸盐水泥基灰泥的拉伸强度或粘结强度的标准试验方法

Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension

用直接张力测量硅酸盐水泥基灰泥抗拉强度或粘结强度的标准试验方法

Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension

瓷砖和硅酸盐水泥粘结强度的标准试验方法

Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste

热喷涂涂层附着力或粘结强度的标准试验方法

Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings

斜切法测定混凝土用环氧树脂粘结剂的粘结强度的标准试验方法

Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear

斜切法测定混凝土用环氧树脂粘结剂的粘结强度的标准试验方法

Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear

室外灰泥面粘结剂的标准规格

Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering

金属对金属粘合剂蠕变试验的标准实施规程

Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives

用螺旋线圈试验测定电绝缘清漆粘合强度的标准试验方法

Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test

通过螺旋线圈法测定电气绝缘漆热耐受性能的标准试验方法

Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by Helical Coil Method

热塑性交通标志材料粘合强度的标准试验方法

Standard Test Method for Bond Strength of Thermoplastic Traffic Marking Materials

用双扭线圈试验进行电绝缘清漆的粘结强度的标准试验方法

Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test

用扭线圈试验测定电绝缘清漆粘合强度的标准试验方法

Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test

电绝缘清漆耐湿性能的标准试验方法

Standard Test Method for Moisture Resistance of Electrical Insulating Varnishes

电气绝缘漆化学耐受性标准测试方法

Standard Test Method for Chemical Resistance of Electrical Insulating Varnishes

测定屋顶或防水膜和系统中材料间粘合强度和粘合强度的标准试验方法

Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems

采用拔出试验的混凝土与纤维增强聚合物基复合棒材粘结强度的标准试验方法

Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing

纤维增强聚合物基复合材料棒与混凝土结合强度的标准试验方法

Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing

胶粘剂粘结抗剥落或爆皮强度的标准试验方法

Standard Test Method for Peel or Stripping Strength of Adhesive Bonds

薄板塑料和电绝缘材料粘结强度的标准试验方法

Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials

塑料薄板和电绝缘材料粘结或内聚强度的标准试验方法

Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials

结构构件上喷涂防火材料的凝聚性/粘结性的标准试验方法

Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members

应用于结构构件的喷涂耐火材料的内聚力/粘附力的标准试验方法

Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members

耐火灰浆（高温、空气凝固）的标准规范

Standard Specification for Mortar, Refractory (High-Temperature, Air-Setting)

评估外墙保温装饰系统的拉伸-粘结性能试验方法

Standard Provisional Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)

C1857-评估混凝土修补和覆盖砂浆粘附（拉脱）强度的试验方法

C1857-Test Method for Evaluating the Adhesion (Pull-Off) Strength of Concrete Repair and Overlay Mortar

D4796-热塑性路面标志材料粘合强度的测试方法

D4796-Test Method for Bond Strength of Thermoplastic Pavement Marking Materials

增大橡胶或热塑性材料的切割和与硬板粘合的设定 四切法

Rubber, vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple-shear methods

煤矿用地层加强支持系统部件.岩石锚栓规范

Strata reinforcement support system components used in coal mines – Part 1: Specification for rockbolting

圬工的试验方法.粘结扭转法测定粘结强度

Methods of test for masonry - Determination of bond strength by the bond wrench method

通过束试验测定钢筋和蒸气加气混凝土之间粘结性

Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the "beam test" - Short term test

混凝土结构的防护和修理用产品和系统.试验方法.测定有限延展性的喷射产品的粘结性和伸长能力

Products and systems for the protection and repair of concrete structures - Test methods - Adhesion and elongation capacity of injection products with limited ductility

液压固化地板修平和/或整平复合物的试验方法.粘结强度的测定

Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength

防水用柔性薄板.混凝土船桥甲板和其他可通过车辆的混凝土表面的防水性.粘结强度的测定

Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of bond strength

找平层材料的试验方法.粘结强度的测定

Methods of test for screed materials - Determination of bond strength

喷射混凝土试验 第4部分 直接拉伸法测定岩芯的粘结强度

Testing sprayed concrete - Part 4: Bond strength of cores by direct tension

指接结构实木. 性能要求和最低生产要求

Structural finger jointed solid timber. Performance requirements and minimum production requirements

用于保护和修复混凝土结构的产品和系统 测试方法 测试参考混凝土

Products and systems for the protection and repair of concrete structures. Test methods. Reference concretes for testing

圬工辅助砌块的试验方法.灰浆连接处预制基地接合处加固的粘结强度的测定

Methods of test for ancillary components for masonry - Determination of bond strength of prefabricated bed joint reinforcement in mortar joints

防水用柔性片材 用于混凝土桥面和其他人流量大的混凝土区域的防水的塑料和橡胶片材 定义和特性

Flexible sheets for waterproofing – Plastic and rubber sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete – Definitions and characteristics

建筑外墙外保温工程检验美利体育登录入口官网技术规程

Technical regulations for inspection and testing of building exterior wall insulation projects

防水用柔性片材 用于混凝土桥面和其他人流量大的混凝土区域的防水塑料和橡胶片材 定义和特性

Flexible sheets for waterproofing - Plastic and rubber sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics; German version CEN/TS 17048:2024

柔性防水板 用于混凝土桥面和其他混凝土交通区域防水的塑料和橡胶板 定义和特性

Flexible sheets for waterproofing - Plastic and rubber sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics; German version CEN/TS 17048:2024

砌体砂浆试验方法第12部分：底材上硬化抹灰和抹灰砂浆粘合强度的测定（草案）

Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates

抗弯试验测定钢筋和高压蒸气养护的加气混凝土之间的粘结特性 第2部分：长期试验（草案）

Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test - Part 2: Long term test

通过梁试验测定钢筋和蒸压加气混凝土之间的粘结性能 第2部分：长期试验

Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test - Part 2: Long term test; German version EN 12269-2:2010

用于保护和修复混凝土结构的产品和系统 测试方法 第2部分：注射产品粘附力的测定 有或没有热循环 拉伸粘合强度的粘附力（草案）

Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with or without thermal cycling - Adhesion by tensile bond strength

沥青混合料 测试方法 第48部分：层间粘合

Bituminous mixtures - Test methods - Part 48: Interlayer Bonding; German and English version prEN 12697-48:2019

瓷砖用粘合剂 水泥粘合剂用抗张粘合强度的测定

Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives

卷材涂层金属 试验方法 第7部分：抗弯曲开裂（T 型弯曲试验）

Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)

卷材涂层金属 试验方法 第7部分：抗弯曲开裂性（T 型弯曲试验）

Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German version EN 13523-7:2021

混凝土路面 第3部分：从核心处测定混凝土路面厚度的试验方法（草案）

Concrete pavements - Part 3: Test methods for the determination of the thickness of a concrete pavement from cores

喷射混凝土试验.第4部分:使用直接压力测定岩芯的粘结强度

Testing sprayed concrete - Part 4: Bond strength of cores by direct tension; German version EN 14488-4:2005+A1:2008

测试喷射混凝土 第4部分：直接拉伸芯材粘结强度

Testing sprayed concrete - Part 4: Bond strength of cores by direct tension; German version EN 14488-4:2005+A1:2008

用于隔热/隔音复合板和石膏板的石膏基粘合剂-定义、要求和测试方法

Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards - Definitions, requirements and test methods; German version EN 14496:2017

球墨铸铁管、管件和附件 管道外部水泥砂浆涂层 要求和试验方法

Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods; German version EN 15542:2008 / Note: To be replaced by DIN EN 15542 (2022-02).

防水柔性板 混凝土桥面板和其他混凝土交通区域防水用塑料和橡胶板 定义和特性

Flexible sheets for waterproofing - Plastic and rubber sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics; German and English version prEN 17048:2016

航空航天系列非金属材料发泡结构胶试验方法第2部分：压缩管剪切

Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Part 2: Compressive tube shear; German and English version EN 2667-2:2018

承重木结构用粘合剂 试验方法 第3部分：通过温度和湿度循环试验测定木纤维酸性腐蚀对横向拉伸强度的影响（草案）

Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength

砖石工程辅助部件规格 第3部分：钢丝网底层接缝加强筋（草案）

Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork

砖石工程辅助部件规格 第3部分：钢丝网底层接缝加强筋（草案）

Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork

砖石工程辅助元部件试验方法.第2部分:灰缝中预制底层接缝加筋结合强度测定

Methods of tests for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints; German version EN 846-2:2000

砌体附属构件试验方法第2部分：灰缝预制床缝加固粘结强度的测定德文版 EN 846-2:2000

Methods of tests for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints; German version EN 846-2:2000

砌筑砂浆规范 第2部分：砌筑砂浆（草案）

Specification for mortar for masonry - Part 2: Masonry mortar

砌筑砂浆规范.第2部分:砌筑砂浆;德文版本EN 998-2-2016

Specification for mortar for masonry - Part 2: Masonry mortar; German version EN 998-2:2016

牙科学 可摘义齿软衬料 第2部分：长期使用的材料（草案）

Soft linings for removable dentures in dentistry Part 2: Materials for long-term use (draft)

牙科 粘合 切口边缘剪切粘结强度试验（草案）

Dental bonding incision edge shear bond strength test (draft)

钢丝绳输送机皮带 钢丝绳和芯层间粘合试验 初始试验和热处理后试验（草案）

Adhesion test between wire rope and core layer of wire rope conveyor belts Initial test and post-heat treatment test (draft)

纸质印刷品覆膜过程控制及美利体育登录入口官网方法.第1部分：基本要求

Lamination process control and testing methods for paper prints.Part 1: General requirements

测定浸渍剂对漆包线基材粘结强度的试验方法

Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate

电子封装用环氧塑封料测试方法

Test method of epoxy molding compound for electronic packaging

建筑墙壁结构.面板与地基粘着强度试验方法

Wall masonry constructions. Test methods for bond strength of facing tiles with the base

混合干式建筑水泥粘合剂.测试方法

Dry building cement binder mixes. Test methods

混凝土钢筋用纤维增强型聚合物杆. 物理机械性能的测定

Fiber-reinforced polymer bar for concrete reinforcement. Determination of physical-mechanical properties

桥面防水用加固沥青板. 粘结强度的测定方法

Reinforced bitumen sheets for waterproofing of bridge decks. Method of determination of bond strength

瓷砖用干混水泥基粘合剂 规格

Dry-mix construction cement based adhesives. Specifications

一般用途的汽车道路 用于桥面防水的高分子材料 测试方法

Automobile roads of general use. Polymeric materials applied for waterproofing bridge deck. Test methods

半导体器件-微机电器件-第38部分：MEMS互连中金属粉末浆料粘合强度的测试方法

Semiconductor devices - Micro-electromechanical devices - Part 38: Test method for adhesion strength of metal powder paste in MEMS interconnection

混凝土的纤维增强聚合物(FRP)加固.试验方法.第2部分:FRP薄板材

Fibre-reinforced polymer (FRP) reinforcement of concrete - Test methods - Part 2: FRP sheets

热喷涂.用压痕法评定粘合强度的分类方法

Thermal spraying - Classification method of adhesive strength by indentation

牙科.牙齿结构的附着力试验

Dentistry - Testing of adhesion to tooth structure

牙科 含有粘接成分的聚合物基固位材料

Dental polymer-based retention material with adhesive component

建筑工程饰面砖粘结强度检验标准

Testing standard for adhesive strength of tapestry brick of construction engineering

柔性防水板 塑料和弹性体混凝土桥面铺装及其他混凝土交通区防水板 定义与特性

Flexible sheets for waterproofing - Plastic and rubber sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics

砂浆试验方法 第12部分：硬化抹灰砂浆在基材上的黏结强度测定

Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates

砌体试验方法 第5部分：拉拔法测定粘结强度

Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method

基于石膏的保温和隔声复合板及石膏板粘合剂 定义、要求和试验方法

Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards - Definitions, requirements and test methods

铸铁管、管件及辅件 水泥砂浆内衬技术要求与试验方法

Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods

航空航天系列 非金属材料 泡沫结构胶粘剂 试验方法 第2部分：压缩管剪切

Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Part 2: Compressive tube shear

用于防水的柔性片材 用于混凝土桥面和其他混凝土交通区域防水的塑料和橡胶板 定义和特征

Flexible sheets for waterproofing. Plastic and rubber sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete. Definitions and characteristics

硬聚氯乙烯（PVC-U）塑料管道系统用溶剂型胶粘剂

Solvent cements for unplasticized poly (vinyl chloride)(PVC-U) plastic piping system

混凝土测试 固化混凝土、喷射混凝土和抹灰的粘结强度

Concrete testing - Hardened concrete, shotcrete and plaster - Adhesion strength

砌体试验方法 第5部分：咬合力的咬合扭力法确定

Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method

沥青混合料 试验方法 第48部分：层间粘结

Bituminous mixtures - Test methods - Part 48: Interlayer Bonding

水凝地板抹平和/或找平化合物的试验方法 粘结强度的测定

Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength

柔性防水膜 混凝土桥梁板和其他可通车的混凝土表面的防水 黏结强度的确定

Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of bond strength

砂浆材料试验方法 第8部分：粘结强度的测定

Methods of test for screed materials - Part 8: Determination of bond strength

喷射混凝土试验 第4部分：通过直接拉伸法测定芯材的粘结强度

Testing sprayed concrete - Part 4: Bond strength of cores by direct tension

基于石膏的热/声绝缘复合板和石膏板粘合剂 定义、要求及试验方法

Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards - Definitions, requirements and test methods

混凝土结构保护和修复用产品和系统 试验方法 拉拔法测量粘结强度

Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off

砌体辅助部件试验方法 第2部分：砂浆接缝中预制床接缝钢筋粘结强度的测定

Methods of test for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints

橡胶、硫化或热塑性橡胶 剪切模量和与刚性板的粘附性的测定 四点剪切法（ISO 1827:2022 等同）

Rubber, vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple-shear methods (ISO 1827:2022, IDT)

卷材涂层金属 测试方法 第7部分：抗弯曲开裂性（T 形弯曲测试）

Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)

隔热/隔音复合板和石膏板用石膏基粘合剂 定义、要求和试验方法

Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards - Definitions, requirements and test methods

测定浸渍剂与漆包线基材粘合强度的测试方法（IEC 61033:1991 + A1:2006）

Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate (IEC 61033:1991 + A1:2006). (Endorsed by AENOR in April of 2007.)

防水用柔性片材 混凝土桥面和其他人流量大的混凝土区域防水用塑料和橡胶片材 定义和特性

Flexible sheets for waterproofing - Plastic and rubber sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics

卷材涂层金属 试验方法 第7部分：抗弯曲开裂性(T 型弯曲试验)

Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)

浸渍剂对涂漆导线基材粘合强度测定的试验方法

Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate

Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate (IEC 61033:1991 + A1:2006); German version EN 61033:2006

Pruefverfahren zur Bestimmung der Verbackungsfestigkeit von Impraegniermitteln auf einem Lackdraht-Substrat (IEC 61033:1991 + A1:2006); Deutsche Fassung EN 61033:2006