美利体育登录入口官网

无粘结土-骨料基层的再生混凝土骨料标准规范

Standard Specification for Reclaimed Concrete Aggregate for Unbound Soil–Aggregate Base Course

压实土-水泥混合物干湿试验的标准试验方法

Standard Method of Test for Wetting-and-Drying Test of Compacted Soil-Cement Mixtures

压实土-水泥混合物冻融试验的标准试验方法

Standard Method of Test for Freezing-and-Thawing Tests of Compacted Soil–Cement Mixtures

使用 4.54 千克（10 磅）夯锤和 457 毫米（18 英寸）落锤测试土壤水分密度关系的标准方法

Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop

碾压混凝土的压实

Compaction of Roller-Compacted Concrete

碾压混凝土压实 报告

RCC Compaction Report

混凝土测试方法 方法 4.1：新拌混凝土空气含量的测定 测量随着气压增加混凝土体积的减少

Methods of testing concrete, Method 4.1: Determination of air content of freshly mixed concrete — Measuring reduction in concrete volume with increased air pressure

集料的取样和试验方法 成角性值

Methods for sampling and testing aggregates - Angularity number

工程用土壤测试方法 第 0 部分：定义和一般要求

Methods of testing soils for engineering purposes - Part 0: Definitions and general requirements

工程用土壤测试方法 方法 6.1.1：土壤强度和固结测试 土壤加州承载比的测定 重塑样本的标准实验室方法

Methods of testing soils for engineering purposes, Method 6.1.1: Soil strength and consolidation tests — Determination of the California Bearing Ratio of a soil — Standard laboratory method for a remoulded specimen

商业和住宅开发区用土木工程指南

Guidelines on earthworks for commercial and residential developments

商用和住宅开发土木工程指南

Guidelines on earthworks for commercial and residential developments

压实密集式和开放式沥青铺路混合料中孔隙百分比的标准试验方法

Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures

采用标准作用力 (12 400 ft-lbf/ft3 (600 kN-m/m3)) 测定土壤实验室压实特性的标准试验方法

Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft³ (600 kN-m/m³))

土木工程用土壤的试验方法.相关的压实试验

Methods of test for soils for civil engineering purposes - Compaction-related tests

土木工程用土壤试验方法 第4部分：压实相关试验

Methods of test for Soils for civil engineering purposes — Part 4 : Compaction - related tests

测试混凝土 - 第106部分：新拌混凝土空气含量的测定方法

Testing concrete — Part 106 : Methods for determination of air content of fresh concrete

松散的和液压粘合的混合料.测定湿度值试验方法

Unbound and hydraulically bound mixtures - Test method for the determination of the moisture condition value

建筑垃圾再生集料公路路基技术规范

Technical specification for highway subgrade made of recycled aggregate from construction waste

建筑土壤 研究和测试 普罗克特方法

DIN 18127-1997-рус

德国建筑包工合同程序(VOB). 第C部分: 建筑包工合同通用技术规范(ATV). 道路施工. 无胶凝材料路面层

German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Road construction - Surfacings without binder

骨料机械和物理性能试验第4部分：干压实填料空隙率的测定（草案）

Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler

新混凝土试验 第6部分：密度

Testing fresh concrete - Part 6: Density

硬化混凝土试验 第2部分：强度试验用试样的制作和养护（草案）

Testing hardened concrete - Part 2: Making and curing specimens for strength tests

沥青混合物 测试方法 第33部分：滚筒压实机制备的样本（草案）

Bituminous mixtures - Test methods - Part 33: Specimen prepared by roller compactor

沥青混合料.热混沥青用试验方法.第33部分:用碾压机制备的样本

Bituminous mixtures - Test methods for hot mix asphalt - Part 33: Specimen prepared by roller compactor (includes Amendment A1:2007); English version of DIN EN 12697-33:2007-11

沥青混合物 测试方法 第 33 部分：滚筒压实机制备的样本（包括修正案 A1:2022）

Bituminous mixtures - Test methods - Part 33: Specimen prepared by roller compactor (includes Amendment A1:2022)

沥青混合物 试验方法 第33部分：碾压机制备的试样

Bituminous mixtures - Test methods - Part 33: Specimen prepared by roller compactor; German version EN 12697-33:2019+A1:2022

沥青混合料试验方法第56部分：静态压实试样制备（草案）

Bituminous mixtures - Test methods - Part 56: Specimen preparation by static compaction

未粘合和水硬性粘合混合物 第50部分：使用 Proctor 美利体育官网首页网址或振动台压实制造水硬性粘合混合物测试样品的方法（草案）

Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction

松散的和液力粘合的混合料.第50部分:利用普氏美利体育官网首页网址或振动台击实生产液力粘合混合料的试验样本的方法

Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction; German version EN 13286-50:2004

建筑用隔热产品 原位形成的膨胀粘土轻骨料产品 第1部分：安装前松散填充产品的规范（草案）

Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation

热绝缘材料和产品.现场成形膨胀粘土轻集料产品.第1部分:松填装产品的安装前规范

Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation; German version EN 14063-1:2004

保温材料及制品 原位成型膨胀粘土轻骨料制品

Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation; German version EN 14063-1:2004 / Note: To be replaced by DIN EN 14063...

建筑用隔热产品 原位形成的膨胀粘土轻骨料产品 第1部分：安装前松散填充产品的规范

Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation; German and English version prEN 14063-1:2016

土工织物和土工织物相关产品 安装过程中的损坏 全尺寸测试（草案）

Geotextiles and geotextile-related products - Damage during installation procedure - Full scale test

一般用途的汽车道路 开展工作的规则 合格评定

Automobile roads of general use. Rules of carrying out the works. Conformity assessment

捣固后土壤的夯实试验方法

Test method for soil compaction using a rammer

砾石 用于道路建设 测试方法 第二部分 确定实验室参考密度和含水量的测试方法 普罗克托压实

Soils for use in road construction - Test methods - Part 2 - Test methods for laboratory reference density and water content - Proctor compaction

建筑隔热材料 施工现场成型的轻质陶粒制品 第1部分：未成型散装制品的技术要求

Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation

用于防水的柔性片材 车辆可通行的混凝土桥面及其他混凝土表面的防水 沥青层抗压性测定

Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the resistance to compaction of an asphalt layer

土建工程 第三部分 施工顺序

Earthworks - Part 3: Construction procedures

NF?EN?12390-2?Juin?2019

沥青混合料 — 试验方法 — 第33部分：用碾压压实机准备试件

Bituminous mixtures — Test methods — Part 33: Specimen prepared by roller compactor

路基 路面施工 结构成分 混合料成分和配方 性能和控制

Road foundations - Construction of pavement structures - Components - Mix components and formulae - Performance and control

沥青混合料 热拌沥青混合料试验方法 第33部分：用压实机制备的试样

Bituminous mixtures - Test methods for hot mix asphalt - Part 33: Specimen prepared by roller compactor

无束缚和液压结合混合物 第二部分：实验室参考密度和含水量的试验方法 配重压实法

Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction

隔热材料和制品 现场发泡轻质陶粒产品（LWA） 第一部分：安装前松散填充产品的规范

Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation

金属粉末（不含硬质合金粉末） 单轴压缩条件下可压性测定方法（ISO 3927:2017）

Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2017)

隔热材料和制品 原位形成的膨胀粘土轻骨料制品（LWA） 第1部分：安装前松散填充制品的规范

Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation

沥青混合料 试验方法 第33部分：用滚压机制备的试样

Bituminous mixtures - Test method - Part 33: Specimen prepared by roller compactor