美利体育登录入口官网

高级工业陶瓷.陶瓷复合材料.物理性能.密度和表观孔隙率的测定

Advanced technical ceramics - Ceramic composites - Physical properties - Physical properties - Determination of density and apparent porosity

烧结金属材料(硬金属除外).渗透性烧结金属材料.密度、油含量和开口孔隙度的测定

Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity

精细陶瓷（先进陶瓷、先进技术陶瓷）密度和显气孔率的测定

Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination ofdensity and apparent porosity

垃圾填埋场用土工滤网

Geofiltration fabrics for landfills

防风抑尘网通用技术条件

General technical requirements for windproof and dust suppression nets

致密成型耐火制品试验方法.第1部分:容积密度、表观孔隙度和真气孔率的测定; 德文版本 EN 993-1:1995

Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity; German version EN 993-1:1995

致密定形耐火制品试验方法第1部分：堆积密度、显气孔率和真气孔率的测定德文版 EN 993-1:2018

Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity; German version EN 993-1:2018

印花镍网

Printed nickel mesh

工业用筛板 板厚<3mm的圆孔和方孔筛板

Industrial plate screens--Thickness below 3mm-Round and square holes

工业用筛板 板厚≥3 mm的圆孔和方孔筛板

Industrial plate screens-Thickness of 3mm and above-Round and square holes

工业用金属丝网和金属丝编织网 网孔尺寸与金属丝直径组合选择指南 金属丝编织网的优先组合选择

Industrial wire screens and woven wire cloth-Guide to the choice of aperture size and wire diameter combinations-Part 2:Preferred combination for woven wire cloth

烧结金属材料(不包括硬质合金)可渗性烧结金属材料.密度、含油率和开孔率的测定

Sintered metal materials,excluding hardmetals.Permeable sintered metal materials.Determination of density,oil content,and open porosity

未模制的粒状耐火材料 吸水、表观密度和外露孔隙的测定法

Refractories unshaped granular. Methods for determination of water absorption, apparent density and open porosity

烧结金属材料,不包括硬质金属 密度、含油量和开孔率的测定

Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity

孔板式格栅除污机

Orifice grille decontamination machine

玻璃纤维增强热固性树脂承载型格栅

Glass fiber reinforced thermosetting resin grating for supporting loads

烧结金属材料（硬质合金除外）—可渗透烧结金属材料—密度、含油量和开孔孔隙率的测定

Sintered metal materials, excluding hardmetals — Permeable sintered metal materials — Determination of density, oil content and open porosity

烧结金属材料（硬质合金除外） 透气性烧结金属材料 密度、含油量和开孔率的测定（ISO 2738:1999）

Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999)

确定含有嵌入放射性废物的水硬性材料中的气体孔隙率和气体渗透率（ISO 11599:1997 等同采用）

Determination of gas porosity and gas permeability of hydraulic binders containing embedded radioactive waste (ISO 11599:1997, IDT)

热导管铜粉

Heat pipe copper powder