玻璃增强热固性塑料管是一种由玻璃纤维增强的热固性塑料制成的管材，具有高强度和耐腐蚀性能。用于输送流体的强化塑料管道，由热固性树脂基体与玻璃纤维增强材料复合而成，需具备抵抗内部循环压力的能力，适用于压力和重力排水及污水系统。
| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| DIN EN 1447 A1 E:2010-06 试验 |
塑料管道系统 玻璃纤维增强热固性塑料（GRP）管 长期内压抗压强度的测定 Plastic piping systems - Determination of the long-term compressive strength of glass-reinforced thermosetting plastic (GRP) pipes under internal pressure
|
2010-06 德国标准化学会 |
| DIN EN 1447:2011 试验 |
塑料管道系统.玻璃增强热固性塑料管(GRP)长期耐内压能力的测定;德文版本EN 1447-2009+A1-2010 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure; German version EN 1447:2009+A1:2010
失效 |
2011-01 德国标准化学会 |
| DIN EN 1447:2011-01 试验 |
塑料管道系统 玻璃增强热固性塑料（GRP）管道 长期耐内压的测定 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure; German version EN 1447:2009+A1:2010
失效 |
2011-01 德国标准化学会 |
| GOST R 57008-2016 试验 |
玻璃纤维增强热固性塑料管和管道部分. 潮湿条件下长期特定环形松弛硬度和松弛因子的试验方法 Fiberglass-reinforced thermosetting plastic pipes and parts of pipelines. Test method for long-term specific ring relaxation stiffness and relaxation factor under wet conditions
|
2016 俄罗斯标准局 |
| GOST R 57035-2016 试验标准 |
Fiberglass-reinforced thermosetting plastic pipes and parts of pipelines. Determination of resistance to cyclic internal pressure
|
2016 俄罗斯标准局 |
| ISO 10466:2021 试验 |
玻璃纤维增强热固性塑料(GRP)管材. 耐初始环状变形可能性试验方法 Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection
|
2021-04-00 国际标准化组织 |
| ISO 10468:2018 试验 |
玻璃增强热固性塑料(GRP)管.潮湿条件下长期特定环形蠕变硬度的测定和湿蠕变因子的计算 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions
|
2018-05-01 国际标准化组织 |
| ISO 10471:2003/Amd 1:2010 试验 |
玻璃纤维增强热固性塑料(GRP)管道.湿润条件下长期极限抗弯应变和长期极限相对环状挠曲的测定.修改件1 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions; Amendment 1
|
2010-09 国际标准化组织 |
| ISO 15306:2003/Amd 1:2012 试验 |
Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the resistance to cyclic internal pressure; Amendment 1
|
2012-02-01 国际标准化组织 |
| ISO 7509:2000 试验 |
塑料管道系统 玻璃纤维增强热固性塑料(GRP)管材 持续内压力下破坏时间的测定 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of time to failure under sustained internal pressure
失效 |
2000-06 国际标准化组织 |
| ISO 8513:2023 规范/规程 |
塑料管道系统 玻璃增强热固性塑料（GRP）管 测定初始纵向拉伸强度的试验方法 Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the initial longitudinal tensile strength
纵向拉伸强度 |
2023-07 国际标准化组织 |
| ISO 8533:2003/Amd 1:2012 试验 |
压力和无压力排水和排污塑料管道系统. 基于不饱和聚酯树脂的玻璃增强热固性塑料 (GRP) 系统. 胶合接头或包好的接头设计验证的试验方法; 修改件1 Plastics piping systems for pressure and non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin - Test methods to prove the design of cemented or wrapped joints; Amendment 1
|
2012-03 国际标准化组织 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证：京ICP证110310号
页面更新时间: 2026-09-15 20:58