美利体育登录入口官网

用锥形承口连接聚氯乙烯 (PVC) 或氯化聚氯乙烯 (CPVC) 管和管道部件的一步法（仅使用溶剂胶粘剂）的标准规范

Standard Practice for the One-Step (Solvent Cement Only) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets

支撑和定位销

Support and location pins

过盈配合 第1部分：圆柱形自锁压入的计算和设计规则

Interference fits - Part 1: Calculation and design rules for cylindrical self-locking pressfits

过盈配合 第1部分：圆柱自锁压配合的计算和设计规则

Interference fits - Part 1: Calculation and design rules for cylindrical self-locking pressfits

过盈配合.计算原理和设计规则

Interference fits - Calculation and design rules

ISO 公制粗牙和细牙螺纹，用于直径为 5 毫米至 16 毫米的铝合金铸造合金中的过盈配合 标称尺寸、公差和尺寸限制

ISO metric coarse and fine pitch screw threads for interference fits in aluminium cast alloys with diameters from 5 mm to 16 mm - Nominal sizes, tolerances and limits of size

ISO米制螺纹.铝铸造合金的过盈配合用粗牙和细牙螺纹.标称直径5mm至16mm.标称尺寸、尺寸公差和极限偏差

ISO-metric screw threads; coarse pitch threads and fine pitch threads for interference fits in aluminium cast alloys; nominal diameter from 5 mm to 16 mm; nominal sizes, tolerances and limits of sizes

ISO 公制粗牙和细牙螺纹，用于直径为 5 mm 至 16 mm 的铝合金铸造合金中的过盈配合 内螺纹和外螺纹量规

ISO metric coarse and fine pitch screw threads for interference fits in aluminium cast alloys with diameters from 5 mm to 16 mm - Gauges for internal and external threads

ISO米制螺纹.铝铸造合金的过盈配合用粗牙和细牙螺纹.标称直径5mm至16mm.内螺纹和外螺纹量规

ISO-metric screw threads; coarse pitch threads and fine pitch threads for interference fits in aluminium cast alloys; nominal diameter from 5 mm to 16 mm; gauges for internal and external threads

航空航天系列.带自润滑衬料的铝合金制有法兰衬套.尺寸和负载

Aerospace series; bushes flanged, aluminium alloy, with self-lubricating liner; dimensions and loads; German version EN 2286:1989

航空航天系列 轴套 普通铝合金 带自润滑衬里 高负载 第2部分：尺寸和负载 英制系列

Aerospace series - Bushes, plain in aluminium alloy with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series; German and English version EN 4534-2:2016

铁路应用.轮组和转向架.轮组.产品要求

Railway applications - Wheelsets and bogies - Wheelsets - Product requirements

极限与配合 过盈配合的计算和选用

Limits and fits-The calculation and selection of interference fits

直径公差带z7和u8圆柱销(8297)

Diameter tolerance zone z7 and u8 cylindrical pin (8297)

带热塑密封件的旋转轴唇型密封.第1部分:标称尺寸与公差

Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 1: Nominal dimensions and tolerances

过盈配合的油压装卸

Interference fits using oil under pressure on assemblies

WGC型垂直安装鼓形齿式联轴器

Perpendicular installation of curved tooth coupling WGC

带槽销. 全长度锥槽的销钉

Grooved pins. Full-length taper grooved.

插头，扩展 CRES，303，长，STD 和 .010 超大直径，UNS S30300

PLUG, EXPANSION - CRES, 303, LONG, STD AND .010 OVERSIZE DIAMETERS, UNS S30300

阀导承信息报告

Valve Guide Information Report

阀座密封圈信息报告.信息报告代替Ford ESE-M1A106-A,ESE-M1A122–A

Valve Seat Insert Information Report

旋转轴唇形密封圈 涡轮型 密封元件 第2部分：术语（ISO 16589-2:2011 等同采用）

Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 2: Vocabulary (ISO 16589-2:2011, IDT)

旋转轴唇形密封圈包含弹性密封元件 第2部分：词汇（ISO 6194-2:2009 等同采用）

Rotary shaft lip- type seals incorporating eleastomeric sealing elements - Part 2: Vocabulary (ISO 6194-2:2009, IDT)