美利体育登录入口官网

螺纹：尺寸计算和舍入的标准规范

Screw Threads: Standard Practice for Calculating and Rounding Dimensions

螺纹:术语、定义和字母符号

Screw Threads: Nomenclature, Definitions, and Letter Symbols Revision of ANSI B1.7M-1984

螺纹:术语、定义和字母符号

Screw Threads: Nomenclature, Definitions, and Letter Symbols Revision of ANSI B1.7M-1984

通用梯形螺纹规范

Specification for General purpose acme screw threads

造船. 船舶螺旋推进器. 制造公差. 直径在0.80至2.50 m (包含本数) 范围内的推进器

Shipbuilding. Ship screw propellers. Manufacturing tolerances. Propellers of diameter between 0,80 and 2,50 m inclusive

螺纹.词汇表

Screw threads - Vocabulary

ISO一般用途米制螺纹.第52部分:多头螺纹用公差和齿形偏差

ISO general purpose metric screw threads - Part 52: Multi-start thread tolerances and deviation of profile

ISO 通用公制螺纹 第5部分：1 毫米和 1.25 毫米细牙螺纹的标称尺寸

ISO general purpose metric screw threads - Part 5: Nominal sizes for 1 mm and 1,25 mm fine pitch threads; nominal diameter from 7,5 mm to 200 mm

攻螺纹内径用钻头直经

Diameters of drills for minor diameters of tapped threads

公制偏梯形螺纹 第2部分：总体规划

Metric buttress threads - Part 2: General plan

公制偏梯形螺纹 第2部分：总体规划

Metric buttress threads - Part 2: General plan

方形焊接螺母

Square weld nuts

ISO一般用途米制螺纹.基本牙形.第1部分:米制螺纹

ISO general purpose metric screw threads - Basic profil - Part 1: Metric screw threads (ISO 68-1:1998)

ISO 通用螺纹 基本轮廓 第1部分：公制螺纹

ISO general purpose screw threads - Basic profile - Part 1: Metric screw threads (ISO 68-1:1998 + Amd.1:2020)

船用金属螺旋桨技术条件

Marine metal propeller technical conditions

锯齿形(3°、30°)螺纹.第3部分:基本尺寸

Buttress threads with the flank angles of 3 and 30 degrees.Part 3:Basic dimensions

小螺纹 第2部分:公差和极限尺寸

Miniature screw threads.Part 2:Tolerances and limits of size

统一螺纹 牙型

Unified screw threads-Profiles

圆柱螺纹美利体育登录入口官网方法

Test methods for parallel screw threads

梯形和锯齿形螺纹收尾、肩距、退刀槽和倒角

Runouts, undercuts and chamfers for trapezoidal and buttress threads

粮油机械 螺旋输送机

Grain and oil machinery—Screw conveyer

普通螺纹量规 技术条件

Specification of gauges for general purpose screw threads

造船 船用螺旋桨 制造公差 第1部分：直径大于2.5m的螺旋桨

Shipbuilding—Ship screw propellers—Manufacturing tolerances—Part 1:Propellers of diameter greater than 2.5m

造船 船用螺旋桨 制造公差 第2部分：直径在0.8m至2.5m的螺旋桨

Shipbuilding—Ship screw propellers—Manufacturing tolerances—Part 2:Propellers of diameter between 0.8m and 2.5m inclusive

梯形螺纹 第2部分：直径与螺距系列

Trapezoidal screw threads—Part 2: General plan

普通螺纹 优选系列

General purpose metric screw threads--Preferable plan

MJ螺纹 第1部分：通用要求

MJ threads Part 1: General requirements

互换性基本规范.公制螺纹.直径及螺距

Basic norms of interchangeability. Metric screw threads. General plan

互换性基本规范.公制螺纹.牙型

Basic norms of interchangeability. Metric screw threads. Profile

造船.船舶螺旋桨.制造公差.第1部分:直径大于2.5 m的螺旋桨

Shipbuilding. Ship screw propellers. Manufacturing tolerances. Part 1. Propellers of diameter greater than 2,5 m

国家测量统一性保证体系.圆柱螺纹规.鉴定程序

State system for ensuring the uniformity of measurements. Cylindric thread gauges. Verification procedure

Roscas en pulgadas ISO. Plan general, medidas básicas, juegos y tolerancias.

ISO Inch Threads. General plan, basic dimensions, sets, and tolerances.

造船 船用螺旋桨 制造公差 第1部分:螺旋桨直径>2.5m

Shipbuilding; Ship screw propellers; Manufacturing tolerances; Part 1 : Propellers of diameter greater than 2,50 m

螺纹.词汇

Screw threads - Vocabulary

ISO通用螺纹-基本轮廓-第2部分：英制螺纹

ISO general purpose screw threads - Basic profile - Part 2: Inch screw threads

ISO通用公制螺纹-基本尺寸；技术勘误表1

ISO general-purpose metric screw threads - Basic dimensions; Technical Corrigendum 1

ISO 通用公制螺纹 公差 第4部分：热镀锌外螺纹与镀锌后达到公差位置 H 或 G 的内螺纹配合的尺寸极限

ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot-dip galvanized external threads to mate with internal threads made to tolerance position H or G after galvanizing

螺纹测量线

Wires for measuring screw threads

插入 CRES 螺旋线圈细螺纹 直螺柱锁定 2.5 直径标称长度

Insert - CRES Helical Coil Fine Thread@ Straight Stud Locking@ 2.5 Dia Nom Length

龙头编号系统

Numbering System for Taps

ISO公制梯形螺纹 总体图（ISO 2902:2016 等同采用）

ISO metric trapezoidal screw threads - General plan (ISO 2902:2016, IDT)

ISO 通用螺纹 基本轮廓 第1部分：米制螺纹

ISO general purpose screw threads - Basic profile - Part 1: Metric screw threads