美利体育登录入口官网

普通剪刀

SCISSORS, GENERAL (Potts Smith design)

不锈钢零件、美利体育官网首页网址和系统的清洗、除垢、酸洗和钝化的标准实施规程

Standard Practice for Cleaning, Descaling, Pickling, and Passivation of Stainless Steel Parts, Equipment, and Systems

不锈钢零件化学钝化处理的标准规格

Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts

试验涂料和相关镀覆产品用镀锌和涂锌合金涂层钢板制备的标准操作规程

Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products

外科器械的腐蚀试验方法

Standard Test Method for Corrosion of Surgical Instruments

平耐热钢垫圈规范

Specification for Washers, flat heat resisting steel

航空航天系列.钝化耐热钢常规双边宽度标称高度开槽/槽顶六角螺母.等级:1100MPa(室温)/650℃

Aerospace series - Nuts, hexagonal, slotted/castellated, normal height, normal accross flats, in heat resisting steel, passivated - Classification: 1100 MPa (at ambient temperature) / 650 °C

钝化处理的耐热镍基合金中长度螺纹紧公差标准螺杆的大双六角头螺栓.等级:1550MPa(室温)/315℃

Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1550 MPa (at ambient temperature) /315 °C

钝化耐蚀钢制短螺纹粗公差标准螺杆标准六角头米制螺栓.分类:600MPa(室温)/425℃

Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature) / 425 °C

航空航天系列.载荷扩散的沉头垫圈.耐热钢

Aerospace series - Washers countersunk, load spreading - Heat resisting steel

航空航天系列.贴边/密封垫圈.耐热钢

Aerospace series - Washers, facing/packing - Heat resisting steel

钝化处理的耐热耐蚀钢短螺纹紧公差标准螺杆斜十字槽盘头螺钉.等级:1100 MPa(室温)/425℃

Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C

航空航天系列 钝化的耐热镍基合金中长度螺纹、紧公差标准杆、大型十二角头螺栓 等级 1250MPa(室温)/650℃

Aerospace series - Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1250 MPa (at ambient temperature) / 650 °C

航空航天系列.钝化的耐热钢制带有埋头孔的自锁双六角螺母.分类:1100 MPa(室温)/650℃

Aerospace series. Nuts, bihexagonal, self-locking, with counterbore, in heat resisting steel, passivated. Classification: 1100 MPa (at ambient temperature)/650°C

舰船用铜镍合金钝化膜层规范

Specification for copper-nickel alloy passivating layer for ships

航空航天系列 耐腐蚀钢的钝化和镍基或钴基合金的去污

Aerospace series - Passivation of corrosion resisting steels and decontamination of nickel or cobalt base alloys; German and English version ASD-STAN prEN 2516:2022

航空航天系列-耐腐蚀钢的钝化和镍基或钴基合金的净化

Aerospace series - Passivation of corrosion resisting steels and decontamination of nickel or cobalt base alloys; German and English version ASD-STAN prEN 2516:2022 / Note: Date of issue 2023-02-03*Intended as replacement for DIN EN 2516 (2020-03).

航空航天.钝化耐蚀钢螺纹长度接近顶部带槽平头螺丝.等级:600 MPa(室温)/425℃

Aerospace series - Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C ; German version EN 2650:1996

航空航天系列.钝化耐蚀钢螺纹长度接近顶部带槽100度沉头螺丝.等级:600 MPa(室温)/425℃

Aerospace series - Screws, 100° countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C; German version EN 2653:1996

航空航天系列.耐热钢制钝化标称对边高度降低的槽头/齿形头六角螺母.等级:900MPa(室温)/650℃; 德文版本 EN 2810:2001

Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2810:2001

航空航天系列 螺母 六角形 开槽/齿形 正常高度 正常对边 耐热钢 钝化 分类：1100 MPa（环境温度）/650°C

Aerospace series - Nuts, hexagonal, slotted/castellated, normal height, normal across flats, in heat resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 2869:2009

航空航天系列.钝化耐高温镍基合金中长螺纹十二角紧配合螺丝.等级 1550MPa(室温)/315℃

Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1550 MPa (at ambient temperature)/315 °C; German version EN 2874:1996

航空航天系列.钝化耐蚀钢短螺纹公称六角螺拴.等级:600MPa(室温下)/425℃; 德文版本 EN 2887:1995

Aerospace series - bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C; German version EN 2887:1995

航空航天系列.钝化耐腐蚀短螺纹标准杆粗公差普通六角头米制螺钉.等级:600MPa(室温下)/425℃

Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C; German and English version EN 2888:2006

航空航天系列 公制螺栓 普通六角头 粗公差普通杆 短螺纹 耐腐蚀钢 钝化 分类：600 MPa（环境温度）/425°C

Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C; German and English version EN 2888:2006

航空和航天.耐高温钢制钝化的大外径平垫圈

Aerospace series - Washers, flat, large diameter, in heat resisting steel, passivated; German version EN 2914:1996

航空航天系列.钝化耐高温钢有耳锁紧垫圈

Aerospace series - Washers, tab, in heat resisting steel, passivated; German version EN 2948:1996

航空航天系列.耐高温钢钝化平垫圈

Aerospace series - Washers, flat, in heat resisting steel, passivated; German version EN 2998:1996

航空航天系列.短螺纹耐热耐蚀钢制钝化粗容差标称手柄标称六角头螺栓.等级:1100 MPa(环境温度)/425°C,德文和英文版本EN 3052:2009

Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 3052:2009

航空航天系列 螺栓 普通六角头 紧公差普通杆 短螺纹 耐热耐腐蚀钢 钝化 分类：1100 MPa（环境温度）/425°C

Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 3052:2009

航空航天系列.耐腐蚀钢FE-PA2601制钝化英制100度沉头标称凸头实心铆钉; 德文版本 EN 3138:2001

Aerospace series - Rivets, solid, 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series; German version EN 3138:2001

航空航天系列.耐腐蚀钢FE-PA2601制钝化英制100度标称沉头实心铆钉; 德文版本 EN 3140:2001

Aerospace series - Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series; German version EN 3140:2001

航空航天系列.钝化处理的耐热镍基合金中长度螺纹紧公差标准螺杆的大双六角头螺栓.等级:1250MPa(室温)/650℃

Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1250 MPa (at ambient temperature)/650 °C; German and English version EN 3444:2006

航空航天系列 耐热镍基合金 NI-PH2601（Inconel 718）钝化的 MJ 螺纹螺栓 分类：1 550 MPa（在环境温度下）/650 锛烠 技术规范

Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1 550 MPa (at ambient temperature) / 650 ？C - Technical specification; German and English version EN 3833:2019

航空航天系列.钝化耐高温钢制小板手开口度平面六角螺母.等级:600MPa(室温)/650℃

Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/650 °C; German version EN 4069:1996

航空航天系列 钝化的耐腐蚀钢制螺纹至头部的斜十字槽盘头螺钉 等级:490MPa(室温)/425℃

Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated - Classification: 490 MPa (at ambient temperature) / 425 °C; German and English version EN 4075:2008

航空航天系列 螺钉 盘头 偏置十字形凹槽 螺纹头部 耐腐蚀钢 钝化 分类：490 MPa（环境温度）/425°C

Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated - Classification: 490 MPa (at ambient temperature) / 425 °C; German and English version EN 4075:2008

航空航天系列.带橡胶垫圈的钝化耐腐蚀钢环状夹具("P" 型).尺寸规格和质量.德文和英文版本EN 4113-2009

Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated, with rubber cushioning - Dimensions, masses; German and English version EN 4113:2009

航空航天系列 耐腐蚀钢制环状夹具（“P”型） 钝化处理 带橡胶缓冲垫 尺寸、质量

Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses; German and English version EN 4113:2023

航空航天系列 耐腐蚀钢环夹（“P”型） 用橡胶缓冲钝化 尺寸 质量

Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses; German and English version EN 4113:2023

用有色热镀铝法钝化镍合金耐热中长螺纹紧公差标称柄大十二头螺栓.分类:1550MPa(室温)/315℃

Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating, Classification: 1 550 MPa (at ambient temperature)/315 °C; German and

航空航天系列-规定抗拉强度<=1450MPa的钢材、铜合金、镍合金和铝合金零件和紧固件的锌镍（12%至16%Ni）镀层（草案）

Aerospace series - Zinc-Nickel (12 % to 16 % Ni) plating of steels with specified tensile strength <= 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners

航空航天系列-规定抗拉强度<=1450MPa的钢材、铜合金、镍合金和铝合金零件和紧固件的锌镍（12%至16%Ni）镀层

Aerospace series - Zinc-Nickel (12 % to 16 % Ni) plating of steels with specified tensile strength <= 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners; German and English version EN 4826:2014

航天系列 垫圈、止动器

Aerospace series - Washer, retaining; German and English version EN 6090:2016

航空航天系列-耐腐蚀钢的钝化和镍基或钴基合金的净化

Aerospace series - Passivation of corrosion resisting steels and decontamination of nickel or cobalt base alloys

金属和其它无机覆盖层 不锈钢部件平整和钝化的电抛光法

Metallic and other inorganic coatings.Electropolishing as a means of smoothing and passivating and passivating stainless steel

紧固件表面处理 耐腐蚀不锈钢钝化处理

Passivation of corrosion-resistant stainless-steel fasteners

金属镀层. 附加无Cr(VI)处理的铁或钢表面锌和锌合金电镀层

Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment

航空航天.耐蚀钢的钝化处理

Passivation treatments for corrosion-resisting steel of aerospace use

航空航天系列 六角螺母 平形 标准高度 标准对边距 耐热钢钝化 等级：1 100 MPa/650 °C

Aerospace series - Nuts, hexagonal, plain, normal height, normal across flats, heat resisting steel passivated - Classification: 1 100 MPa/650 °C

航空航天系列 六角槽型螺母 普通高度 普通对边尺寸 耐热钢材质 钝化处理 等级：1 100 MPa（环境温度）/ 650 °C

Aerospace series - Nuts, hexagonal, slotted/castellated, normal height, normal accross flats, in heat resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature) / 650 °C

航空航天系列 公制螺栓 标准六角头 粗公差正常螺纹杆 短螺纹 耐蚀钢制 钝化处理 等级：600 MPa（常温）/425 °C

Aerospace series - Metric Bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C

航空航天系列 紧固件 环形（“P”型） 耐腐蚀钢制成 带橡胶缓冲垫 尺寸、质量

Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses

航空航天系列 螺钉 100°沉头 六角花形内凹 短螺纹 耐热钢 FE-PA2601 (A286) 钝化处理 分类：900 MPa (环境温度) / 650 °C

Aerospace series - Screws, 100° countersunk head, six lobe recess, short thread, in heat resisting steel FE-PA2601 (A286), passivated - Classification: 900 MPa (at ambient temperature) / 650 °C

航空航天系列耐腐蚀钢的钝化和镍或钴基合金的去污

Aerospace series - Passivation of corrosion resisting steels and decontamination of nickel or cobalt base alloys

航空航天系列耐腐蚀钢的钝化和镍或钴基合金的去污

Aerospace series - Passivation of corrosion resisting steels and decontamination of nickel or cobalt base alloys

耐腐蚀钢的钝化处理

Passivation Treatments for Corrosion-Resistant Steel

管材 钢材 耐腐蚀 （304） 退火 无缝和焊接

Tubing@ Steel@ Corrosion-Resistant@ (304)@ Annealed@ Seamless and Welded

航空航天系列 耐热钢制钝化六角开槽/槽形、减小高度、正常对边、等级：900MPa（环境温度）/650℃

Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 MPa (at ambient temperature)/650 ?C

Aerospace系列 螺栓 正六角头 正常公差杆部 短螺纹 抗热和腐蚀钢 经钝化处理 分类: 1 100 MPa（室温）/ 425摄氏度

Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature) / 425 degrees Celsius

航空航天系列 实心铆钉 100°沉头标准头 带圆顶 采用耐腐蚀钢FE-PA2601 钝化 英制系列

Aerospace series - Rivets, solid, 100? countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series

航空航天系列 实心铆钉 100°沉头普通头 耐腐蚀钢FE-PA11 钝化 英制系列

Aerospace series - Rivets, solid, 100? countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series

航空航天系列 实心铆钉 100°沉头普通头 耐腐蚀钢FE-PA2601 钝化 英制系列

Aerospace series - Rivets, solid, 100? countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series

Aerospace系列 夹具、环（P型）在耐腐蚀钢上经过橡胶缓冲处理 尺寸、质量

Aerospace series — Clamps, loop ("P" type) in corrosion resisting steel, passivated with rubber cushioning — Dimensions, masses

Aerospace系列 螺母 六角自锁塑料环 标准高度 对边普通 腐蚀 resistant钢 钝化 分类：900 MPa（室温）/ 120 °C

Aerospace series - Nuts, hexagon, self-locking by plastic ring, normal height, normal across flats, in corrosion resisting steel, passivated - Classification: 900 MPa (at ambient temperature) / 120 °C

Aerospace系列 螺丝 100度锪孔头 六边凹槽 短螺纹 耐热钢FE-PA2601（A286） 表面钝化 分类：900 MPa（室温）/ 650摄氏度

Aerospace series - Screws, 100 degrees countersunk head, six lobe recess, short thread, in heat resisting steel FE-PA2601 (A286), passivated - Classification: 900 MPa (at ambient temperature) / 650 degrees Celsius

铁路混凝土梁配件多元合金共渗防腐技术条件

Technical specification for the railway concrete beam accessories with multi-element co-penetration

航空航天系列 耐腐蚀钢钝化和镍基合金净化

Aerospace series - Passivation of corrosion resisting steels and decontamination of nickel base alloys (Endorsed by Asociación Espa?ola de Normalización in February of 2020.)

航空航天系列 耐腐蚀钢的钝化和镍基或钴基合金的净化

Aerospace series - Passivation of corrosion resisting steels and decontamination of nickel or cobalt base alloys (Endorsed by Asociación Espa?ola de Normalización in February of 2024.)

航空航天系列 螺母 六角形 普通 正常高度 正常对边 钝化耐热钢 分类：1100 MPa/650°C

Aerospace series - Nuts, hexagonal, plain, normal height, normal across flats, heat resisting steel passivated - Classification: 1 100 MPa/650 °C (Endorsed by AENOR in May of 2010.)

航空航天系列 螺母 六角形 开槽/齿形 正常高度 正常对边 耐热钢 钝化 分类：1100 MPa（环境温度）/650°C

Aerospace series - Nuts, hexagonal, slotted/castellated, normal height, normal accross flats, in heat resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature) / 650 °C (Endorsed by AENOR in January of 2010.)

航空航天系列 公制螺栓 普通六角头 粗公差普通杆 短螺纹 耐腐蚀钢 钝化 分类：600 MPa（环境温度）/425°C

Aerospace series - Metric Bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C (Endorsed by AENOR in January of 2007.)

航空航天系列 埋头垫圈 负载分散 耐热钢

Aerospace series - Washers countersunk, load spreading - Heat resisting steel (Endorsed by AENOR in July of 2008.)

航空航天系列 垫圈 表面/填料 耐热钢

Aerospace series - Washers, facing/packing - Heat resisting steel (Endorsed by AENOR in July of 2008.)

航空航天系列 套管 管状 凸头 耐腐蚀钢制成 钝化（壁厚 0.25 毫米）

Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness) (Endorsed by Asociación Espa?ola de Normalización in December of 2019.)

航空航天系列 耐热钢垫圈

Aerospace series. Washers in heat resisting steel. (Endorsed by AENOR in December of 2001.)

航空航天系列 螺母 双六角形 自锁 带沉孔 耐热钢 钝化 分类：1100 MPa（环境温度）/650°C

Aerospace series - Nuts, bihexagonal, self-locking, with counterbore, in heat resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature) / 650 °C (Endorsed by AENOR in December of 2010.)

航空航天系列 润滑轴向型接头 采用耐腐蚀钢制成 已钝化

Aerospace series - Nipples, lubricating, axial type, in corrosion resisting steel, passivated (Endorsed by Asociación Espa?ola de Normalización in March of 2017.)

航空航天系列 耐腐蚀钢环夹（“P”型） 用橡胶缓冲钝化 尺寸 质量

Aerospace series - Clamps, loop (''P'' type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses (Endorsed by AENOR in December of 2009.)

航空航天系列 耐腐蚀钢制环状夹具（“P”型） 带橡胶缓冲垫 尺寸、质量

Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses