美利体育登录入口官网

锻造眼栓

Forged Eyebolts

铸件、锻件，和模制零部件

Casting, Forgings, and Molded Parts

铸件、锻件和模制件

Castings, Forgings, and Molded Parts

高温美利体育官网首页网址用锻制或轧制合金和不锈钢管法兰、锻制管件、阀门和零件的标准规范

Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

锻造用不锈钢坯段和棒材的标准规格

Standard Specification for Stainless Steel Billets and Bars for Forging

锻造用不锈钢坯料和棒材的标准规范

Standard Specification for Stainless Steel Billets and Bars for Forging

锻造用不锈钢坯料和棒材的标准规范

Standard Specification for Stainless Steel Billets and Bars for Forging

碳钢吊环螺栓的标准规范

Standard Specification for Carbon Steel Eyebolts

压力容器部件用调质碳素钢和合金钢锻件的标准规范

Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components

飞机和航空航天锻件用优质合金钢坯料和坯料标准规范

Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings

锻铁素体、铁素体/奥氏体和马氏体不锈钢管道配件的标准规范

Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings

锻造和类似用途用碳钢板标准规格

Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications

锻造和类似应用用碳钢板材的标准规范

Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications

锻造和类似应用用碳钢板材标准规范

Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications

锻钢管道配件的一般要求用标准规范

Standard Specification for Common Requirements for Wrought Steel Piping Fittings

铜和铜合金锻造杆材, 棒材和型材的标准规格

Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes

钼及其合金锻造件规范

Specification for Molybdenum and Molybdenum Alloy Forgings

未合金化烧结钨棒、棒材、杆材和预成型件的规范

Specification for unalloyed sintered tungsten rods, bars, rods and preforms

铍铜合金(UNS编号C17000和C17200)锻件和挤压件的标准规格

Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions

铜铍合金锻件和挤压件的标准规范（UNS编号C17500、C17510和C17540）

Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions (UNS Nos. C17500, C17510, and C17540)

镁合金锻件标准规范

Standard Specification for Magnesium-Alloy Forgings

锻制焊接螺丝扣标准规范

Standard Specification for Turnbuckles, Swaged, Welded, Forged

一般工程用途的开模钢锻件 非合金优质钢和特殊钢

Open die steel forgings for general engineering purposes. Non-alloy quality and special steels

石油和天然气工业.管道运输系统的吸入管弯头、配件和法兰.法兰

Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Flanges

航空航天系列.钛合金TI-P64001(Ti-6Al-4V).未经过热处理.锻坯用于煅烧锻件.De 360 mm

Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Not heat treated. Forging stock, for annealed forgings. De 360 mm

航空航天系列 钢 X3CrNiMoAl13-8-2 (1.4534) 固溶退火和沉淀硬化 1 400≤Rm≤1 550 MPa 锻件 深度≤100毫米

Aerospace series. Steel X3CrNiMoAl13-8-2 (1.4534). Solution annealed and precipitation hardened. 1 400 ≤ Rm ≤ 1 550 MPa. Forgings. De ≤ 100 mm

铝及铝合金 锻件 尺寸和形状公差

Aluminium and aluminium alloys. Forgings. Tolerances on dimensions and form

绿色法兰锻造企业评价指南

Evaluation Guide for Green Flange Forging Enterprises

藏式传统金属加工工艺分类

Classification of Tibetan traditional metal processing technology

一般工程用自由锻钢锻件 第2部分：非合金钢和特种钢

Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels

一般工程用开模钢锻件第2部分：非合金钢和特殊钢

Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels; German version EN 10250-2:2022

铜及铜合金 锻造用材（已加工和未加工） 德文版本 EN 12165:2024

Copper and copper alloys - Wrought and unwrought forging stock; German version EN 12165:2024

航空系列 钢 FE-PL73 1230 MPa ≤ Rm ≤ 1420 MPa 锻件和铸造件 d ≤ 40 mm

Aviation series steel FE-PL73 1230 MPa ≤ Rm ≤ 1420 MPa Forgings and castings d ≤ 40 mm

航空系列 钢 FE-PL74 1100 MPa ≤ Rm ≤ 1300 MPa 锻件 直径 ≤ 100 mm

Aviation series steel FE-PL74 1100 MPa ≤ Rm ≤ 1300 MPa Forging diameter ≤ 100 mm

航空航天系列 钢30CrNiMo8(1.6580) 1100MPa≤Rm≤1300MPa 锻件 De≤100mm

Aerospace series – Steel 30CrNiMo8 (1.6580) – 1 100 MPa ≤ Rm ≤ 1 300 MPa – Forgings – De ≤ 100 mm

航空航天系列 钢 FE-PM67 溶解退火和沉淀强化 1400 Rm 1550 MPa 锻件 De 100 mm

Aerospace series steel FE-PM67 Solution annealed and precipitation hardened 1400 Rm 1550 MPa Forging De 100 mm

航空航天系列 - 耐热合金X12CrNiCoMoW21-20 - 固溶处理 - 锻件 - 直径100毫米

Aerospace series – Heat resisting alloy X12CrNiCoMoW21-20 – Solution treated – Forgings – De 100 mm

航空航天系列 X4CrNiMo16-5-1 (1.4418) 型钢 空气熔炼 淬火和回火 锻件 De ≤ 200 mm 1150 MPa ≤ Rm ≤ 1300 MPa（草案）

Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - D e <= 200 mm - 1 150 MPa <= R m <= 1 300 MPa

航空航天系列.X4CrNiMo16-5-1(1.4418)型钢.空气熔炼.淬火和回火.锻件.D<指数e>≤200mm.900MPa≤R<指数m>≤1050MPa;德文版本EN 4630-2014

Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - D e <= 200 mm - 900 MPa <= R m <= 1050 MPa; German and English version EN 4630:2014

航空航天系列 - X4CrNiMo16-5-1(1.4418)钢 - 空气熔炼 - 淬火和回火 - 锻件 - 直径≤200mm - 抗拉强度900MPa至1050MPa

Aerospace series – Steel X4CrNiMo16-5-1 (1.4418) – Air melted – Hardened and tempered – Forgings – De 200 mm – 900 MPa Rm 1 050 MPa

通用阀门碳素钢锻件技术条件

General purpose industrial valves.Specification of carbon steel forgings

钛合金等温锻造 工艺规范

Isothermal forging for titanium-alloy—Technological specification

锻压术语

Terminology of forging and stamping

起重机 锻造和冲压挂钩 技术要求

Cranes. Forged and stamped hooks. Technical requirements

主要铁路车辆的牵引用传动齿轮.原始件.技术规范

Transmission tooth gears of the traction main railway stock. Raw pieces. Technical specifications

汽车发动机.连杆.技术要求和测试方法

Automobile engines. Connecting rods. Technical requirements and test methods

锻压.词汇

Forging -- Vocabulary

U型螺栓钢丝绳夹具

U-bolt wire rope grips

耕作机具用刀

Blades for tillers

锻件用碳素钢大钢坯和坯料(修改件2)

Carbon steel blooms and billets for forgings (Amendment 2)

镁合金锻件

Magnesium alloy forgings

自由锻造工具钢锤锻件 通用技术条件 第2部分：优质非合金钢和特殊钢

Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels

纯铜与铜合金：可变形与不可变形的锻造坯料

Copper and copper alloys - Wrought and unwrought forging stock

航空航天系列 铝及铝镁合金 技术规范 第6部分：铝合金锻坯

Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 6: Aluminium alloy forging stock

阀门、法兰、管件和其他管道部件用钢铸件和锻件质量标准磁粉探伤法

Quality Standard for Steel Castings and Forgings for Valves, Flanges, Fittings, and Other Piping Components - Magnetic Particle Examination Method

一般工程用开模钢锻件 第2部分：非合金钢和特种钢

Open die steel forgings for general engineering purposes - Part 2 : non-alloy quality and special steels

一般用途钢锻件 第 2 部分：优质非合金钢和特殊钢

General purpose steel forgings - Part 2: unalloyed quality steels and specialty steels

钢棒 线材 锻件 挤压件 管材 和环磨损 磨损 和耐腐蚀 8.0Mn 4.0Si 17Cr 8.5Ni 0.13N 固溶热处理

Steel@ Corrosion-Resistant@ Bars@ Wire@ Forgings@ Extrusions@ Tubing@ and Rings Wear and Galling Resistant 8.0Mn - 4.0Si - 17Cr - 8.5Ni - 0.13N Solution Heat Treated (UNS S21800)

钢棒、锻件以及用于锻造或闪光焊接环的钢环和坯料航空级 0.50Cr 0.55Ni 0.25Mo (0.38 0.43C) (8740)

Steel Bars, Forgings, and Rings and Stock for Forging or Flash Welded Rings Aircraft-Quality 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (8740)

钛合金、棒材、线材、自由锻件、环件和拉制形状 4Al-2.5V-1.5Fe 退火 可热处理

Titanium Alloy, Bars, Wire, Forgings, Rings, and Drawn Shapes, 4Al - 2.5V -1.5 Fe, Annealed, Heat Treatable

尽量减少锻造钛合金产品中的应力腐蚀开裂

Minimizing Stress-Corrosion Cracking in Wrought Titanium Alloy Products

管件，三通，标准和异径管，37°球形，扩口

FITTING, TEE, STANDARD AND REDUCER, 37° SPHERICAL, FLARED

管件、三通、标准和异径管、扩口管对侧管、外螺纹

FITTING, TEE, STANDARD AND REDUCER, FLARELESS TUBE TO PIPE ON SIDE, EXTERNAL THREAD

不锈钢 SS钢 23 02

Stainless steel - SS steel 23 02

不锈钢 SS钢 23 03

Stainless steel - SS steel 23 03

通用工程用开式Die钢锻件 第2部分：非合金质量与特殊钢

Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels

铜及铜合金 锻造的和未锻造的坯料

Copper and copper alloys — Wrought and unwrought forging stock

航空航天系列 钢 FE-PL31 淬火和回火 手工和模锻

Aerospace series - Steel FE-PL31 - Hardened and tempered - Hand and die forgings

外科植入物 金属材料 第3部分：锻造钛6铝4钒合金（ISO 5832-3:2021）

Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:2021)

双列调心滚子轴承热锻套圈

Hot forging ring of double row self—aligning roller bearing

卡车轮毂轴承热锻套圈

Hot forging ring of bearing for truck wheel hub

一般工程用开模钢锻件第2部分：非合金钢和特殊钢

Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels

铜及铜合金 锻造用变形和未变形的坯料

Copper and copper alloys - Wrought and unwrought forging stock

航空航天系列 钢 FE-PL2108(36NiCrMo16)1100 MPa ≤ Rm ≤ 1300 MPa 锻件 De <= 100mm

Aerospace series. Steel FE-PL2108 (36NiCrMo16). 1 100 MPa <= Rm <= 1 300 MPa. Forgings. De <= 100 mm (Endorsed by AENOR in February of 2011.)

一般工程用途的开式模钢锻件 第2部分：非合金优质钢和特殊钢

Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels

铜和铜合金 锻造和未锻造锻坯

Copper and copper alloys - Wrought and unwrought forging stock