重复性限(以r表示)是在同一实验室、同一操作员、同一美利体育官网首页网址、同一日期内对同一材料获得的两次测试结果之间的临界差异区间。若两次结果之差超过该值,则判定结果不等效。重复性限是评估测试方法精度的统计量,在长期正常正确操作下,仅约5%的情况下两次结果的绝对差异会超过此限值。
| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| ASTM D2961-11 Test Method |
(8号)2.36 mm顶筛煤中单级总湿度低于15%的标准试验方法 Standard Test Method for Single-Stage Total Moisture Less than 15% in Coal Reduced to 2.36-mm (No. 8 Sieve) Topsize
总水分 |
2011 美国材料与试验协会 |
| ASTM D6738-15(2023) 试验 |
Standard Test Method for Precipitated Silica—Volatile Content
挥发物含量 沉淀水合二氧化硅 |
2023-09-01 美国材料与试验协会 |
| ASTM D6740-15(2023) 试验 |
橡胶配方中使用的硅烷的标准试验方法 Standard Test Method for Silanes Used in Rubber Formulations
灼烧残渣 |
2023-11-01 美国材料与试验协会 |
| ASTM RR-C01-1016 2019 试验 |
C1891-45米(325号)空气喷射筛分水硬性水泥细度试验方法 C1891-Test Method for Fineness of Hydraulic Cement by the 45-m (No. 325) Sieve by Air Jet Sieving
水硬性水泥 |
2019 美国材料与试验协会 |
| ASTM RR-C16-1037 2011 试验 |
C0739-Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
|
2011 美国材料与试验协会 |
| ASTM RR-C24-1058 2010 试验 |
C0794-Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
|
2010 美国材料与试验协会 |
| ASTM RR-D01-1191 2019 试验方法 |
D2134-Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
再现性限 |
2019 美国材料与试验协会 |
| ASTM RR-D05-1050 2018 试验 |
D8213-Test Method for Determination of Boron in coal
再现性限 精密度声明 |
2018 美国材料与试验协会 |
| ASTM RR-D11-1107 2011 试验/规范 |
D6738-Test Method for Precipitated SilicaVolatile Content
再现性限 精密度声明 |
2011 美国材料与试验协会 |
| ASTM RR-D15-1031 2012 试验方法 |
D7736-Test Method for Determination of Acids and Glycol Esters in Glycols
再现性限 |
2012 美国材料与试验协会 |
| ASTM RR-D31-1011 2008 试验方法 |
D7477-Test Method for Determining the Area Stability of Wet Blue Submersed in Boiling Water
湿蓝 |
2008 美国材料与试验协会 |
| ASTM RR-D31-1026 2019 试验 |
D5556-加脂剂和柔软剂中使用的脂肪和油中所含水分和其他挥发性物质的测定方法 D5556-Test Method for Determination of the Moisture and Other Volatile Matter Contained in Fats and Oils Used in Fatliquors and Softening Compounds
再现性限 精密度 |
2019 美国材料与试验协会 |
| ASTM RR-E08-1005 2009 试验 |
金属材料线弹性平面应力断裂韧性KIc标准测试方法精度声明研究报告 E08-1005 Standard Test Method for Linear Elastic Plane Stress Fracture Toughness KIc of Metallic Materials Accuracy Statement Research Report E08-1005
|
2009 美国材料与试验协会 |
| ASTM RR-F06-1009 2011 试验方法标准 |
F0386-Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces
再现性限 弹性地板材料 |
2011 美国材料与试验协会 |
| ASTM RR-F08-1008 2008 试验/规范 |
F2157-Specification for Synthetic Surfaced Running Tracks
再现性限 |
2008 美国材料与试验协会 |
| ASTM RR-F17-1056 2018 试验方法 |
F3203-Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX) Pipes and Tubing
交联聚乙烯 凝胶含量 |
2018 美国材料与试验协会 |
| BS EN ISO 3325:1999(2002) 试验/规范 |
Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength
横向断裂强度 烧结金属材料 |
2002-01-01 英国标准学会 |
| DIN 10229:2000 试验 |
Analysis of spices and condiments - Determination of moisture content - Entrainment method
|
2000-08 德国标准化学会 |
| DIN 10316:2000 试验 |
Acidity test of milk and liquid milk products according to Soxhlet-Henkel
酸度 |
2000-08 德国标准化学会 |
| DIN 10316:2000-08 试验 |
Acidity test of milk and liquid milk products according to Soxhlet-Henkel
酸度 |
2000-08 德国标准化学会 |
| DIN 10318:1995 试验 |
Determination of the density of buttermilk serum
乳清 |
1995-05 德国标准化学会 |
| DIN 10477:2000-08 试验 |
Determination of total ash of milk and milk products
总灰分 灰化 |
2000-08 德国标准化学会 |
| DIN 10480:2002 试验 |
黄油和其他油脂涂抹食品中脂肪总含量的测定.使用超临界二氧化碳的萃取法 Determination of the total fat content in butter and fat spreads - Extraction method using supercritical carbon dioxide
|
2002-12 德国标准化学会 |
| DIN 10755:2001-04 试验 |
Analysis of honey - Determination of mineral content
|
2001-04 德国标准化学会 |
| DIN 879-3:1999 规范 |
几何参数验证.线性测量用刻度指示仪.第3部分:带机械指示和电气限定触点的指示仪 Verification of geometrical parameters - Dial indicator for linear measurement - Part 3: With mechanical indication and electrical limit contacts
|
1999-06 德国标准化学会 |
| DIN EN 1131:1994 试验 |
水果和蔬菜汁.相对浓度的测定; 德文版本 EN 1131:1994 Fruit and vegetable juices - Determination of the relative density; German version EN 1131:1994
|
1994-12-01 德国标准化学会 |
| DIN EN 15402:2011 试验 |
固体回收燃料.易挥发物含量的测定.德文版本EN 15402-2011 Solid recovered fuels - Determination of the content of volatile matter; German version EN 15402:2011
固体回收燃料 挥发分 |
2011-05 德国标准化学会 |
| DIN EN 15403:2011 试验 |
固体再生燃料.灰分含量的测定;德文版本EN 15403-2011 Solid recovered fuels - Determination of ash content; German version EN 15403:2011
固体二次燃料 |
2011-05 德国标准化学会 |
| DIN EN 15477 E:2015-03 试验 |
Fertilizers - Determination of the water-soluble potassium content
|
2015-03 德国标准化学会 |
| DIN EN ISO 14680-1:2006 试验 |
Paints and varnishes - Determination of pigment content - Part 1: Centrifuge method (ISO 14680-1:2000); English version of DIN EN ISO 14680-1:2006-04
离心法 颜料含量 |
2006-04 德国标准化学会 |
| DIN EN ISO 15301:2002-01 试验 |
Animal and vegetable fats and oils - Determination of sediment in crude fats and oils - Centrifuge method (ISO 15301:2001); German version EN ISO 15301:2001
沉淀物 离心管 |
2002-01 德国标准化学会 |
| DIN EN ISO 22630 E:2015-06 试验 |
Rapid extraction method for determination of oil content in oleaginous seeds (draft)
再现性限 含油量 |
2015-06 德国标准化学会 |
| DIN EN ISO 22630:2016 试验 |
含油种子.油含量的测定.快速萃取法(ISO 22630-2015).德文版本EN ISO 22630-2015 Oilseed meals - Determination of oil content - Rapid extraction method (ISO 22630:2015); German version EN ISO 22630:2015
油籽粕 |
2016-05 德国标准化学会 |
| DIN EN ISO 5529:2010-08 试验 |
Wheat - Determination of the sedimentation index - Zeleny test (ISO 5529:2007); German version EN ISO 5529:2010
|
2010-08 德国标准化学会 |
| DIN EN ISO 5983-1:2005-10 试验 |
Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Part 1: Kjeldahl method (ISO 5983-1:2005); German version EN ISO 5983-1:2005
凯氏定氮法 粗蛋白质 |
2005-10 德国标准化学会 |
| DIN EN ISO 6271-2:2005 试验 |
Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 2: Spectrophotometric method (ISO 6271-2:2004); German version EN ISO 6271-2:2004
|
2005-03 德国标准化学会 |
| DIN EN ISO 6883 E:2013-12 试验 |
动植物油脂 单位体积(在空气中的升重量)常规质量的测定(草案) Determination of routine mass per unit volume (liter weight in air) of animal and vegetable fats and oils (draft)
比重瓶 |
2013-12 德国标准化学会 |
| DIN EN ISO 6885:2007 试验 |
Animal and vegetable fats and oils - Determination of anisidine value (ISO 6885:2006); German version EN ISO 6885:2007
|
2007-10 德国标准化学会 |
| DIN ISO 11262:2012 试验 |
Soil quality - Determination of total cyanide (ISO 11262:2011)
总氰化物 |
2012-04 德国标准化学会 |
| GB/T 11064.10-2013 试验 |
碳酸锂、单水氢氧化锂、氯化锂化学分析方法 第10部分:氯量的测定 氯化银浊度法 Methods for chemical analysis of lithium carbonate,lithium hydroxide monohydrate and lithium chloride.Part 10:Determination of chloride content.Silver chloride nephelometry method
|
2013-11-27 国家市场监督管理总局 |
| GOST 31727-2012 试验 |
Meat and meat products. Determination of total ash
总灰分 灰化 |
2012 俄罗斯标准局 |
| GOST R 55800-2013 试验 |
Starch. Method of determination total ash
总灰分 淀粉 |
2013 俄罗斯标准局 |
| ISO 2811-4:2011 试验 |
Paints and varnishes - Determination of density - Part 4: Pressure cup method
|
2011-03-01 国际标准化组织 |
| ISO 4259-1:2017/Amd 2:2020 试验 |
石油和相关产品. 测量方法和结果的精度. 第1部分: 测定与试验方法有关的精度数据. 修改件2 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test; Amendment 2
|
2020-12-00 国际标准化组织 |
| ISO 6271-2:2004 试验 |
Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 2: Spectrophotometric method
|
2004-11 国际标准化组织 |
| ISO 928:1997 试验 |
Spices and condiments - Determination of total ash
总灰分 |
1997-12 国际标准化组织 |
| JIS Z 8402-6:1999 试验标准 |
Accuracy (trueness and precision) of measurement methods and results -- Part 6: Use in practice of accuracy values
再现性限 |
1999-05-20 日本工业标准调查会 |
| LST CEN/TS 16490:2013 试验 |
肥料 CEN/TC 260/WG 7 间实验室测试结果的对比与依据第(EC)号2003/2003 号条例附件 II 规定的允许偏差及结论 Fertilizers - Comparison of the CEN/TC 260/WG 7 ring test results with tolerances given in the Regulation (EC) Nr 2003/2003 Annex II and conclusions
再现性限 |
2013-05-31 立陶宛标准局 |
| PD CEN/TS 16490:2013 指南标准 |
肥料.CEN/TC 260/WG 7标准环试验结果与(EC) Nr 2003/2003附件Ⅱ和结论中给定公差的对比 Fertilizers - Comparison of the CEN/TC 260/WG 7 ring test results with tolerances given in the Regulation (EC) Nr 2003/2003 Annex II and conclusions
再现性限 |
2013-04-01 英国标准学会 |
| SIS-CEN/TS 16490:2015 指南标准 |
肥料 CEN/TC 260/WG 7 环试验结果与法规 (EC) Nr 2003/2003 附件 II 中给出的公差比较及结论 Fertilizers - Comparison of the CEN/TC 260/WG 7 ring test results with tolerances given in the Regulation (EC) Nr 2003/2003 Annex II and conclusions
矿物肥料 |
2015 瑞典标准研究所 |
| SN/T 1782-2006 试验 |
Determination of allantoin in cosmetics for import and export - Liquid chromatography method
液相色谱法 |
2006-04-25 行业标准-出入境检验检疫 |
| UNE-CEN/TS 16490:2016 试验标准 |
肥料 CEN/TC 260/WG 7 环测试结果与法规(EC)Nr 2003/2003 附录 II 中给出的容差的比较和结论 Fertilizers - Comparison of the CEN/TC 260/WG 7 ring test results with tolerances given in the Regulation (EC) Nr 2003/2003 Annex II and conclusions
|
2016-09-21 西班牙标准化协会 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号
页面更新时间: 2026-09-07 21:55