不饱和聚酯树脂是交联型树脂材料，具有良好耐化学性和机械性能，主要用于制造玻璃增强热固性塑料等复合材料，是常见的高分子基体材料。
| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| AS 3571.2:2009 试验 |
塑料管道系统 基于不饱和聚酯 (UP) 树脂的玻璃增强热塑性塑料 (GRP) 系统 压力和非压力供水（ISO 10639：2004 MOD） Plastic piping systems Glass-reinforced thermoplastic (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure water supply (ISO 10639: 2004 MOD)
柔性接头 玻璃纤维增强热固性塑料管道 |
2009-1-1 澳大利亚标准协会 |
| ASTM D7029-17 试验方法 |
用于测定180.0度F（82.2℃）的不饱和聚酯和乙烯基酯的反应性的标准测试方法 Standard Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0°F (82.2°C)
乙烯基酯树脂 |
2017-07-15 美国材料与试验协会 |
| ASTM D7029/D7029M-24 试验标准 |
在180.0°F[82.2°C]下测定不饱和聚酯和乙烯基酯反应性的标准试验方法 Standard Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0°F [82.2°C]
乙烯基酯树脂 |
2024-12-01 美国材料与试验协会 |
| BS 2782-4 Method 432D:1995 试验 |
塑料试验方法.第4部分:化学性能.试验方法432D:不饱和聚酯树脂蒸发苯值测定 Methods of testing plastics - Chemical properties - Determination of styrene evaporation from unsaturated polyester resins
苯乙烯 |
1995-08-15 英国标准学会 |
| BS EN ISO 23856:2021 规范标准 |
压力和非压力供水、排水或污水处理用塑料管道系统 基于不饱和聚酯（UP）树脂的玻璃增强热固性塑料（GRP）系统 Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
玻璃纤维增强热固性塑料管道系统 |
2021-07-09 英国标准学会 |
| BS EN ISO 2535:2002 试验 |
Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature
凝胶时间 |
2002-11-22 英国标准学会 |
| BS EN ISO 2554:1999 试验 |
Plastics. Unsaturated polyester resins. Determination of hydroxyl value
羟值 |
1997-08-15 英国标准学会 |
| BS EN ISO 3521:2000(2004) 试验 |
Plastics — Unsaturated polyester and epoxy resins — Determination of overall volume shrinkage
|
2004-01-01 英国标准学会 |
| BS EN ISO 584:1998 试验 |
Plastics - Unsaturated polyester resins - Determination of reactivity at 80 °C (conventional method)
反应性 过氧化苯甲酰 |
1998-01-15 英国标准学会 |
| BS ISO 10467:2018 规范标准 |
用于压力和非压力排水和污水处理的塑料管道系统 — 基于不饱和聚酯（UP）树脂的玻璃增强热固性塑料（GRP）系统 Plastics piping systems for pressure and non - pressure drainage and sewerage — Glass - reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
玻璃纤维增强热固性塑料管道系统 |
2018 英国标准学会 |
| BS ISO 16611:2017 规范标准 |
用于无压排水和污水处理的塑料管道系统 由基于不饱和聚酯树脂(UP)的玻璃增强热固性塑料(GRP)制成的非圆形管道和接头 尺寸、要求和测试 Plastics piping systems for drainage and sewerage without pressure. Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP). Dimensions, requirements and tests
|
2017-06-22 英国标准学会 |
| BS ISO 4901:2011 试验标准 |
不饱和聚酯树脂增强塑料.用气相色谱分析法测定残留苯乙烯单体含量以及其他挥发性芳香烃含量 Reinforced plastics based on unsaturated-polyester resins. Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography
苯乙烯单体 |
2012-01-31 英国标准学会 |
| BS PL 4:2005(2011) 规范标准 |
航空航天系列 高强度纤维增强复合材料低压层压用不饱和聚酯树脂的性能 — 规范 AEROSPACE SERIES Properties of unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites — Specification
固化剂 |
2011 英国标准学会 |
| BS PL 6:2005(2011) 规范 |
Properties of unsaturated polyester resins for low pressure laminating of glass fibre reinforced composites — Specification
固化剂 |
2005-06-08 英国标准学会 |
| CB 180-1998 试验 |
Hand lay-up molding process of marine fiberglass reinforced plastic products
|
1998-1-1 行业标准-船舶 |
| CB/T 180-1998 试验 |
Technology of marine GFRP products hand lay up method
|
1998-12-29 行业标准-船舶 |
| CECS 133-2002 规程 |
Technical specification for protective project of steel structure covered with unsaturated polyester composite materials
|
2002-06-25 行业标准-工程建设推荐性标准 |
| CJ/T 409-2012 试验规范 |
Technical requirement of fiber-glass reinforced plastic septic tank
玻璃纤维 |
2012-11-01 行业标准-城建 |
| DB35/T 1826-2019 规范 |
General technical specification of unsaturated polyester resin for artificial stone
人造石材 |
2019-04-18 福建省地方标准 |
| DIN 16869-2 E:2014-03 试验标准 |
离心铸造填充玻璃纤维增强不饱和聚酯树脂（UP-GF）管道 第2部分：一般质量要求、测试 Centrifugally cast filled glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 2: General quality requirements, testing
玻璃纤维 |
2014-03 德国标准化学会 |
| DIN EN ISO 2535:2003 试验 |
Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature (ISO 2535:2001); German version EN ISO 2535:2002
凝胶时间 |
2003-02 德国标准化学会 |
| DIN EN ISO 2535:2003-02 试验 |
Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature (ISO 2535:2001); German version EN ISO 2535:2002
凝胶时间 |
2003-02 德国标准化学会 |
| DIN EN ISO 2554:1998 试验 |
Plastics - Unsaturated polyester resins - Determination of hydroxyl value (ISO 2554:1997); German version EN ISO 2554:1998
羟值 |
1998-10 德国标准化学会 |
| DIN EN ISO 2554:1998-10 试验 |
Plastics - Unsaturated polyester resins - Determination of hydroxyl value (ISO 2554:1997); German version EN ISO 2554:1998
羟值 |
1998-10 德国标准化学会 |
| DIN EN ISO 3672-1:2002 规范 |
塑料制品.不饱和的聚酯树脂.第1部分:标识体系 (ISO 3672-1:2000); 德文版本 EN ISO 3672-1:2001 Plastics - Unsaturated-polyester resins (UP-R) - Part 1: Designation system (ISO 3672-1:2000); German version EN ISO 3672-1:2001
凝胶时间 数据块系统 |
2002-07 德国标准化学会 |
| DIN EN ISO 3672-1:2002-07 规范 |
塑料 - 不饱和聚酯树脂 (UP-R) - 第 1 部分：名称系统 (ISO 3672-1:2000) Plastics - Unsaturated-polyester resins (UP-R) - Part 1: Designation system (ISO 3672-1:2000); German version EN ISO 3672-1:2001
数据块系统 特征特性 |
2002-07 德国标准化学会 |
| DIN EN ISO 3672-2:2002 试验 |
塑料制品.不饱和的聚酯树脂.第2部分:试样制备和性能测定 (ISO 3672-2:2000); 德文版本 EN ISO 3672-2:2001 Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties (ISO 3672-2:2000); German version EN ISO 3672-2:2001
交联 |
2002-07 德国标准化学会 |
| DIN EN ISO 3672-2:2002-07 试验 |
塑料 不饱和聚酯树脂(UP-R)第2部分：测试样品的制备和性能测定 Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties (ISO 3672-2:2000); German version EN ISO 3672-2:2001
凝胶时间 |
2002-07 德国标准化学会 |
| DIN EN ISO 584:1998 试验 |
Plastics - Unsaturated polyester resins - Determination of reactivity at 80 °C (conventional method) (ISO 584:1982); German version EN ISO 584:1997
反应性 过氧化苯甲酰 |
1998-03 德国标准化学会 |
| EN ISO 3521:1999 试验 |
塑料.不饱和聚酯和环氧树脂.总体积收缩率的测定 ISO 3521-1997 Plastics - Unsaturated Polyester and Epoxy Resins - Determination of Overall Volume Shrinkage ISO 3521: 1997
|
1999-06-01 欧洲标准化委员会 |
| GB/T 1303.7-2009 规范 |
电气用热固性树脂工业硬质层压板.第7部分:聚酯树脂硬质层压板 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 7:Requirements for rigid laminated sheets based on polyester resins
玻璃毡 |
2009-06-10 国家市场监督管理总局 |
| GB/T 14206-2015 规范 |
Glass fiber reinforced polyester continuous sheet
|
2016-11-01 国家市场监督管理总局 |
| GB/T 15928-2008 试验方法 |
Reinforced plastics based on unsaturated polyester resins.Determination of residual styrene monomer content
苯乙烯单体 |
2008-06-30 国家市场监督管理总局 |
| GB/T 24148.1-2009 试验/规范 |
Plastics.Unsaturated-polyester resins(UP-R).Part 1:Designation system
黏度 |
2009-06-15 国家市场监督管理总局 |
| GB/T 24148.2-2009 试验 |
塑料.不饱和聚酯树脂(UP-R).第2部分:试样制备和性能测定 Plastics.Unsaturated-polyester resins(UP-R).Part 2:Preparation of test specimens and determination of properties
试样制备 |
2009-06-15 国家市场监督管理总局 |
| GB/T 24148.4-2009 |
Plastics.Unsaturated polyester resin.Part 4:Determination of viscosity
|
2009-06-15 国家市场监督管理总局 |
| GB/T 24148.7-2014 试验 |
塑料不饱和聚酯树脂(UP-R) 第7部分: 室温条件下凝胶时间的测定 Plastics.Unsaturated polyester resins.Part 7: Measurement of gel time at ambient temperature
凝胶时间 |
2014-07-08 国家市场监督管理总局 |
| GB/T 24148.9-2014 试验 |
塑料 不饱和聚酯树脂(UP-R) 第9部分:总体积收缩率测定 Plastics.Unsaturated polyester resins (UP-R).Part 9:Determination of overall volume shrinkage
|
2014-07-08 国家市场监督管理总局 |
| GB/T 27799-2011 术语 |
Fabric reinforce plastic cover panel of trucks
玻璃纤维 |
2011-12-30 国家市场监督管理总局 |
| GB/T 7193-2008 试验 |
Test methods for unsaturated polyester resins
羟值 |
2008-06-30 国家市场监督管理总局 |
| GOST 22304-1977 试验 |
Unsaturated polyester resins. Methods for determination of asid value
|
1977 俄罗斯标准局 |
| GOST R 57593-2017 试验 |
Plastics. Unsaturated polyester and epoxy resins. Determination of overall volume shrinkage
|
2017-00-00 俄罗斯标准局 |
| ISO 10467:2004/Amd 1:2012 试验/规范 |
压力和无压力排水和排污塑料管道系统.基于不饱和聚酯树脂的玻璃增强热固性塑料(GRP)系统.修改件1 Plastics piping systems for pressure and non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin; Amendment 1
玻璃增强热固性塑料 |
2012-03-01 国际标准化组织 |
| ISO 2535:2001 试验 |
Plastics - Unsaturated-polyester resins - Measurement of gel time at ambient temperature
凝胶时间 |
2001-07 国际标准化组织 |
| ISO 2554:1997 试验 |
Plastics - Unsaturated polyester resins - Determination of hydroxyl value
羟值 |
1997-03 国际标准化组织 |
| ISO 3521:1997 试验 |
Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage
|
1997-03 国际标准化组织 |
| ISO 3521:1997/cor 1:2003 试验 |
塑料.不饱和聚酯树脂和环氧树脂.总体积收缩量的测定.技术勘误1 Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage - Technical Corrigendum 1
|
2003-02 国际标准化组织 |
| ISO 3672-1 术语标准 |
Plastics - Unsaturated-polyester resins (UP-R) - Part 1: Designation system
命名系统 数据块 |
国际标准化组织 |
| ISO 3672-1:2000 规范 |
Plastics - Unsaturated-polyester resins (UP-R) - Part 1: Designation system
数据块 标识系统 |
2000-07 国际标准化组织 |
| ISO 3672-2:2000 试验 |
Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties
交联 |
2000-07 国际标准化组织 |
| ISO 4901:2011 试验 |
不饱和聚酯树脂增强塑料.用气相色谱分析法测定残留苯乙烯单体含量以及其它挥发性芳香烃含量 Reinforced plastics based on unsaturated-polyester resins - Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography
苯乙烯单体 |
2011-08 国际标准化组织 |
| MS 1390-1:2023 规范 |
玻璃纤维增强聚酯板材和面板水箱 第1部分：规范（第二次修订） Glass-fibre reinforced polyester panels and panel water tanks - Part 1: Specification (Second revision)
|
2023-04-10 马来西亚标准 |
| SC/T 8063-2001 规范 |
Unsaturated polyester resin and fiberglass products for glass fiber reinforced plastics fishing vessels
|
2001-06-01 行业标准-水产 |
| SC/T 8121-2001 规范 |
Requirements of execution in the oil water module of fiberglass reinforced plastics fishing vessel
玻璃纤维 |
2001-06-01 行业标准-水产 |
| SC/T 8123-2001 规范 |
Procedures requirements for construction of fiberglass reinforced plastics coated wooden fishing vessel
|
2001-06-01 行业标准-水产 |
| SS-EN 14364:2006+A1:2008 规范 |
有压或无压排水和污水处理用塑料管道系统 基于不饱和聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP） 管道、配件和接头规范 Plastics piping system for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints
玻璃增强热固性塑料 |
2008 瑞典标准研究所 |
| SS-EN 1796:2013 规范标准 |
有压或无压供水用塑料管道系统 基于不饱和聚酯树脂（UP）的玻璃增强热固性塑料（GRP） Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
玻璃纤维增强热固性塑料管道系统 |
2013 瑞典标准研究所 |
| SS-EN ISO 23856:2021 规范标准 |
压力和非压力供水、排水或污水处理用塑料管道系统 基于不饱和聚酯（UP）树脂的玻璃增强热固性塑料（GRP）系统（ISO 23856:2021） Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (ISO 23856:2021)
乙烯基酯树脂 玻璃纤维增强热固性塑料管道系统 |
2021-07-07 瑞典标准研究所 |
| SS-EN ISO 3672-1:2001 规范 |
塑料 不饱和聚酯树脂（UP-R） 第1部分：命名体系（ISO 3672-1:2000） Plastics - Unsaturated polyester resins (UP-R) - Part 1: Designation system (ISO 3672-1:2000)
命名系统 数据块 |
2001 瑞典标准研究所 |
| SS-EN ISO 3672-2:2001 试验 |
塑料 不饱和聚酯树脂（UP-R） 第2部分：试样制备和性能测定（ISO 3672-2:2000） Platics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties (ISO 3672-2:2000)
性能测定 |
2001 瑞典标准研究所 |
| SS-ISO 10467:2018 规范标准 |
压力和非压力排水和排污用塑料管道系统 基于不饱和聚酯（UP）树脂的玻璃增强热固性塑料（GRP）系统（ISO 10467:2018 IDT） Plastics piping systems for pressure and non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (ISO 10467:2018, IDT)
玻璃纤维增强热固性塑料管道系统 |
2018 瑞典标准研究所 |
| SS-ISO 4901:2011 试验标准 |
基于不饱和聚酯树脂的增强塑料 气相色谱法测定残留苯乙烯单体含量以及其它挥发性芳香烃含量（ISO 4901:2011 等同） Reinforced plastics based on unsaturated-polyester resins - Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography (ISO 4901:2011, IDT)
苯乙烯单体 |
2011 瑞典标准研究所 |
| UNE-CEN/TS 14578:2013 规范标准 |
供水或排水和污水处理用塑料管道系统 基于不饱和聚酯树脂(UP)的玻璃增强热固性塑料(GRP)推荐安装实践 Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Recommended practice for installation (Endorsed by AENOR in May of 2014.)
玻璃纤维增强热固性塑料管道系统 |
2014-05-01 西班牙标准化协会 |
| UNE-EN ISO 3672-2:2002 试验 |
塑料 不饱和聚酯树脂（UP-R） 第2部分：试样的制备和性能测定（ISO 3672-2:2000） Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties. (ISO 3672-2:2000)
凝胶时间 |
2002-05-29 西班牙标准化协会 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证：京ICP证110310号
页面更新时间: 2026-06-05 19:10