美利体育登录入口官网

粉末锻造(PF)钢材料中合金或非合金铁杂质百分比的测定用标准试验方法

Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged lpar;PFrpar; Steel Materials

金相试样制备标准指南

Standard Guide for Preparation of Metallographic Specimens

金属和合金的腐蚀 高温腐蚀环境暴露后样品的金相检验方法

Corrosion of metals and alloys. Method for metallographic examination of samples after exposure to high-temperature corrosive environments

金属和合金的腐蚀 暴露于高温腐蚀环境后样品的金相检验方法

Corrosion of Metals and Alloys – Method for Metallographic Examination of Samples After Exposure to High-Temperature Corrosive Environments

金属材料焊缝的破坏性试验 用于宏观和微观检查的蚀刻剂

Destructive tests on welds in metallic materials - Etchants for macroscopic and microscopic examination

使用标准图片对铁非金属夹杂物含量的显微图检验

Micrographic examination of the non-metallic inclusion content of steels using standard pictures; English version of DIN EN 10247:2007-07

火电厂金相检验与评定技术导则

Technical Guidelines for Metallographic Inspection and Evaluation of Thermal Power Plants

金属点焊、凸焊和滚焊焊接接头的显微检验

Microscopic examination of metal spot, projection and roll weld joints

金属填充焊接接头的美利体育登录入口官网 金相检验

Metallographic inspection of metal-filled welded joints

压水堆棒束型燃料组件辐照后检查 第25部分：燃料棒金相检验

Post-irradiation inspection of pressurized water reactor bundle fuel assemblies - Part 25: Metallographic examination of fuel rods

铸造高锰钢金相检验

Metallographic Inspection of High Manganese Steel Casting

热处理金相检验通则

General rules for metallographic examination of heat treatment

一般工程与结构用碳钢及低合金钢铸件金相检验

Metallographic examination of carbon steel and low alloy steel castings for general engineering and structural purposes

灰铸铁金相检验

Metallographic examination of gray cast iron

航空发动机叶片渗层金相检验

Metallographic examination for coatings of aero-engine blade

内燃机 铝活塞奥氏体铸铁镶圈 金相检验

Metallographic Examination of Austenitic Cast Iron Rings for Aluminum Pistons of Internal Combustion Engines

柴油机电控共轨系统 高压元件 金相检验

Metallographic inspection of high-voltage components of diesel engine electronic common rail system

钢铁零件渗金属层金相检验方法

Metallographic examination method of diffusion metallized layer of steel parts

内燃机.活塞环金相检验第1部分:单体铸造活塞环

Internal combustion engines.Piston rings.Metallographic inspections.Part 1: For singlecast cast iron

柴油机喷油泵柱塞偶件.第2部分:性能试验方法

Plunger of diesel fuel injection pump Part 2: Performance test method

内燃机 螺栓和螺母 第3部分:连杆螺栓 金相检验

Internal combustion engines.Bolts and nuts.Part 3: Connecting rod bolts.Metallographic examination

60Si2Mn钢螺旋弹簧.金相检验

60Si2Mn steel helical springs metallographic test

内燃机 轴瓦 第1部分：铸造铜铅合金轴瓦 金相检验

Internal combustion engine bearings - Part 1: Metallographic examination of cast copper-lead alloy bearings

印制电路板金属化孔金相检验方法

Metallographic inspection method for metallized holes in printed circuit boards

使用标准图片对钢中非金属夹杂物的显微检验

Micrographic examination of the non-metallic inclusion content of steels using standard pictures

金属粉末 使用粉末锻造试样测定金属粉末中非金属夹杂物的试验方法（ISO 13947:2007 IDT）

Metallic powders - Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen (ISO 13947:2007, IDT)

金属和合金的腐蚀 高温腐蚀环境暴露后样品的金相检验方法（ISO 26146:2024 IDT）

Corrosion of metals and alloys — Method for metallographic examination of samples after exposure to high-temperature corrosive environments (ISO 26146:2024, IDT)

承压特种美利体育官网首页网址现场金相检验技术导则

Technical Guide for On-site Metallographic Inspection of Special Pressure Equipment

无氧铜含氧量金相检验方法

Metallographic determination methods of oxygen content in oxygen-free copper