验证钢棒中合金元素含量的测试流程，包括稀土总量、杂质含量和水分的测定方法。该分析过程需采用标准化技术手段，确保材料成分数据的准确性和可靠性。
| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| AASHTO M 222M/M 222-1996 规范 |
345 MPa [50 Ksi]最低屈服点高强度低合金结构钢 High-Strength Low-Alloy Structural Steel with 345 MPa [50 Ksi] Minimum Yield Point to 100 mm (4 In] Thick
高强度低合金结构钢 |
1996 美国公路与运输员工协会 |
| ASTM A106/A106M-26 试验 |
Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
拉伸测试 无缝钢管 |
2026-02-15 美国材料与试验协会 |
| ASTM A126-04(2023) 规范 |
Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
|
2023-11-01 美国材料与试验协会 |
| ASTM A618/A618M-04(2015) Specification |
Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
|
2004 美国材料与试验协会 |
| ASTM A800/A800M-20 试验 |
Standard Practice for Estimating Ferrite Content of Stainless Steel Castings Containing Both Ferrite and Austenite
|
2020-05-01 美国材料与试验协会 |
| ASTM A834-95(2015) Specification |
Standard Specification for Common Requirements for Iron Castings for General Industrial Use
铸铁 |
1995 美国材料与试验协会 |
| ASTM A872/A872M-07a Specification |
Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
|
2007 美国材料与试验协会 |
| ASTM A968/A968M-96(2014) Specification |
耐热耐蚀美利体育官网首页网址用铬、铬镍及硅合金钢棒材及型材的标准规格 Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service
|
1996 美国材料与试验协会 |
| ASTM B1027-24 指南 |
Standard Guide for Obtaining a Representative Sample of Copper and Copper Alloy in Particulate Form for Analysis
原子发射光谱法 |
2024-07-01 美国材料与试验协会 |
| ASTM B444-23 规范/规程 |
Standard Specification for Nickel-Chromium-Molybdenum-Niobium Alloys
机械性能测试 |
2023-07-01 美国材料与试验协会 |
| ASTM B72-72 规范 |
Fire casting copper
|
1972 美国材料与试验协会 |
| ASTM B752/B752M-22 规范 |
Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application
|
2022-04-01 美国材料与试验协会 |
| ASTM B880-24 规范 |
Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
钴合金 |
2024-11-01 美国材料与试验协会 |
| ASTM B985-12(2016) Practice |
成分分析用铝锭、坯料、铸件和成品或半成品锻铝产品抽样的标准规范 Standard Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished Wrought Aluminum Products for Compositional Analysis
铝锭 |
2012 美国材料与试验协会 |
| ASTM B985-24 试验/规范 |
成分分析用铝锭、钢坯、铸件和成品或半成品锻造铝制品取样的标准规程 Standard Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished Wrought Aluminum Products for Compositional Analysis
铝材 |
2024-07-01 美国材料与试验协会 |
| ASTM D520-00(2011) Specification |
Standard Specification for Zinc Dust Pigment
筛分分析 |
2000 美国材料与试验协会 |
| ASTM E1086-22 试验 |
Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
火花原子发射光谱法 |
2022-08-15 美国材料与试验协会 |
| ASTM E1277-22 试验 |
电感耦合等离子体原子发射光谱法分析锌-5%铝混合稀土合金的标准试验方法 Standard Test Method for Analysis of Zinc-5?% Aluminum-Mischmetal Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry
锌铝合金 |
2022-11-15 美国材料与试验协会 |
| ASTM E1277-23 试验 |
电感耦合等离子体原子发射光谱法分析锌-5%铝混合稀土合金的标准试验方法 Standard Test Method for Analysis of Zinc-5?% Aluminum-Mischmetal Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry
|
2023-04-01 美国材料与试验协会 |
| ASTM E1806-18 试验规范 |
Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
|
2018-03-15 美国材料与试验协会 |
| ASTM E2823-17 试验 |
通过电感耦合等离子体质谱法分析镍合金的标准测试方法（基于性能） Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based)
|
2017-01-01 美国材料与试验协会 |
| ASTM E3047-22 试验 |
Standard Test Method for Analysis of Nickel Alloys by Spark Atomic Emission Spectrometry
火花原子发射光谱法 |
2022-12-01 美国材料与试验协会 |
| ASTM E32-21 试验 |
Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition
铁合金 |
2021-05-01 美国材料与试验协会 |
| ASTM E55-23 试验/规范 |
Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
|
2023-06-01 美国材料与试验协会 |
| BS EN 10263-2:2017 规范 |
冷镦和冷挤压用钢棒、棒材和线材 冷加工后不进行热处理的钢的交货技术条件 Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for steels not intended for heat treatment after cold working
机械性能测试 |
2017-11-17 英国标准学会 |
| DIN 17567:2004 规范 |
Ferroboron - Technical delivery conditions
颗粒尺寸 |
2004-02 德国标准化学会 |
| DIN EN 10222-2:2021-08 试验 |
压力用途钢锻件 第2部分：具有规定高温性能的铁素体和马氏体钢 Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties; German version EN 10222-2:2017+A1:2021
|
2021-08 德国标准化学会 |
| DIN EN 10277-2:2008 规范 |
Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes; English version of DIN EN 10277-2:2008-06
未合金钢 |
2008-06 德国标准化学会 |
| DIN EN 10277-3:1999 规范 |
Bright steel products – Technical delivery conditions – Part 3: Free-cutting steels
易切削钢 |
1999-01-01 德国标准化学会 |
| DIN EN 13445-2/A8:2019 规范 |
Unfired pressure vessels - Part 2: Materials; German and English version EN 13445-2:2014/prA8:2019
非受火压力容器 |
2019-12-01 德国标准化学会 |
| DIN EN ISO 14284:2003 试验 |
Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996); German version EN ISO 14284:2002
试样制备 |
2003-02 德国标准化学会 |
| DIN EN ISO 6931-1:2020-11 规范 |
Stainless steels for springs - Part 1: Wire (ISO 6931-1:2016); German version EN ISO 6931-1:2020
不锈钢弹簧钢丝 |
2020-11 德国标准化学会 |
| DIN ISO 3547-4 E:2013-08 规范 |
Plain bearings - Wrapped bushes - Part 4: Materials
硬度测试 |
2013-08 德国标准化学会 |
| GB/T 1549-2008 试验/规范 |
Chemical analysis methods of glass,glass marble and vitreous fiber
精密度 |
2008-06-30 国家市场监督管理总局 |
| GB/T 17432-2012 试验 |
Methods for sampling for analyzing the chemical composition of wrought aluminum and aluminum alloys
变形铝及铝合金 试样制备 |
2012-12-31 国家市场监督管理总局 |
| GB/T 19356-2003 CP |
Thermal spraying-Powders-Composition and technical supply conditions
|
2003-10-29 国家市场监督管理总局 |
| GB/T 24514-2009 试验/规范 |
钢表面锌基和(或)铝基镀层单位面积镀层质量和化学成分测定.重量法、电感耦合等离子体原子发射光谱法和火焰原子吸收光谱法 Zinc and/or aluminium based coatings on steel.Determination of coating mass per unit area and chemical composition.Gravimetry,inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
|
2009-10-30 国家市场监督管理总局 |
| GB/T 2526-2020 规范 |
Gadolinium oxide
|
2020-11-19 国家市场监督管理总局 |
| GB/T 28883-2012 试验 |
Composite seamless steel tubes for pressure
|
2012-11-05 国家市场监督管理总局 |
| GB/T 28898-2012 规范 |
Evaluation of uncertainty in chemical composition analysis for metallurgical materials
|
2012-11-05 国家市场监督管理总局 |
| GB/T 34640.1-2017 规范 |
Classification and recycling and utilization of wrought aluminium and aluminium alloy scraps—Part 1: Classification of scraps
变形铝 |
2017-09-29 国家市场监督管理总局 |
| GB/T 38941-2020 规范 |
Superalloy rods for powders atomized by plasma rotating electrode process
|
2020-06-02 国家市场监督管理总局 |
| GB/T 42091-2022 |
Specification of smelting and casting of vacuum ingot for heavy steel forgings
|
2022-12-30 国家市场监督管理总局 |
| GB/T 47093-2026 试验标准 |
Chemical Analysis Methods for Alumina Fiber
化学分析方法 |
2026-01-28 国家市场监督管理总局 |
| GB/T 5216-2004 CP |
Structural steels subject to end-quench hardenability requirements
淬透性 |
2004-01-19 国家市场监督管理总局 |
| GB/T 5239-2015 试验/规范 |
Praseodymium oxide
|
2015-09-11 国家市场监督管理总局 |
| GB/T 699-1999(XG1-2001) 规范 |
Relative humidity tables for environmental test
优质碳素结构钢 力学性能测试 |
2001 国家市场监督管理总局 |
| GJB 163B-2020 规范 |
Specification for high-quality carbon steel for deep drawing
|
2020-06-18 国家军用标准-总装备部 |
| GOST R 57376-2016 规范 |
Copper ingots. Specifications
|
2016 俄罗斯标准局 |
| HG/T 3554-2013 试验 |
Analytical method of chemical composition in ammonia synthesis catalyst
|
2013-10-17 行业标准-化工 |
| HG/T 4858-2015 试验 |
Analytical method of chemical composition in palladium-carbon catalyst for purified terephthalic acid
对苯二甲酸 |
2015-07-29 行业标准-化工 |
| IRAM 9406-3:2007 规范 |
外科植入物 金属材料 钴基合金 第3部分：用于锻造的钴、铬、钨和镍合金 Implants for surgery. Metallic materials. Alloys base cobalt. Part 3: Wrought cobalt, chromium, tungsten, nickel alloy.
|
2007-08-01 阿根廷标准化研究所 |
| IRAM-IAS U 500 605:2009 规范 |
Steel bars hot-rolled.
热轧钢棒 硬度测试 |
2009-11-03 阿根廷标准化研究所 |
| ISO 1927-3:2012 试验方法标准 |
Monolithic (unshaped) refractory products - Part 3: Characterization as received
|
2012-12 国际标准化组织 |
| ISO 8458-3:2002/Cor 1:2003 规范 |
Steel wire for mechanical springs — Part 3: Oil-hardened and tempered wire
弹簧钢丝 机械弹簧 |
2002-10-15 国际标准化组织 |
| ISO 9329-4:1997 规范 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Austenitic stainless steels
交货技术条件 |
1997-03 国际标准化组织 |
| ISO/TR 9769:2018 试验 |
Steel and iron — Review of available methods of analysis
原子吸收光谱 标准方法 |
2018-12-13 国际标准化组织 |
| JB/T 11030-2010 规范 |
Specification of high and low pressure combined rotor forgings for steam turbine
|
2010-02-11 行业标准-机械 |
| JB/T 11033-2010 规范 |
Specification of compressor disk alloy steel forging for gas turbine
|
2010-02-11 行业标准-机械 |
| JC/T 873-2024 试验 |
Methods of chemical analysis for feldspar
玻璃工业 长石 |
2024-10-24 行业标准-建材 |
| JIS G 3441:2021 规范 |
Alloy steel tubes for machine purposes
|
2021-02-22 日本工业标准调查会 |
| JIS R 2501:1981 AMD 1:2006 试验 |
Refractory mortars (Amendment 1)
耐火度 |
2006-03-25 日本工业标准调查会 |
| LST EN ISO 17947:2023 |
技术陶瓷（现代陶瓷 现代技术陶瓷） 氮化硅微粉化学分析方法（ISO 17947:2014） Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of fine silicon nitride powders (ISO 17947:2014)
细陶瓷 |
2023-06-15 立陶宛标准局 |
| MS ISO 4997:2015 规范 |
Cold-reduced carbon steel sheet of structural quality
|
2019-02-05 马来西亚标准 |
| SAE AMS4396G-2024 规范标准 |
镁合金焊丝 3.2 稀土 2.5Zn 0.72Zr (EZ33A) Magnesium Alloy Welding Wire, 3.2 Rare Earths - 2.5Zn - 0.72Zr (EZ33A)
镁合金焊接丝 |
2024-04-09 美国机动车工程师协会 |
| SAE AMS4490K-2017 规范标准 |
镁合金铸件 Die 9.0Al 0.70Zn（AZ91D Temper F）As Cast（UNS M11916） Magnesium Alloy Castings@ Die 9.0Al - 0.70Zn (AZ91D@ Temper F) As Cast (UNS M11916)
压铸件 镁合金 |
2017-05-01 美国机动车工程师协会 |
| SAE AMS5075G-2020 规范 |
钢管，无缝 0.22 0.28C（SAE 1025）冷拔和应力消除 Steel Tubing, Seamless 0.22 - 0.28C (SAE 1025) Cold Drawn and Stress Relieved
无缝钢管 |
2020-07-01 美国机动车工程师协会 |
| SAE AMS5373E-2017 规范 |
合金铸件 砂 耐腐蚀和耐热 16Co 29Cr 4.5W 铸态（UNS R30006） Alloy Castings@ Sand@ Corrosion and Heat Resistant 16Co - 29Cr - 4.5W As Cast (UNS R30006)
射线美利体育登录入口官网 |
2017-04-01 美国机动车工程师协会 |
| SS-EN ISO 17947:2023 试验 |
精细陶瓷（先进陶瓷、先进技术陶瓷） 细硅氮粉的化学分析方法（ISO 17947:2014） Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of fine silicon nitride powders (ISO 17947:2014)
细陶瓷 |
2023 瑞典标准研究所 |
| T/ACREI CREIS54002-2018 规范 |
稀土产品成分分析质量控制技术规范—第2部分·单一稀土金属及其氧化物成分分析 Specification of quality control for chemical analysis of rare earth products —Part 2: Chemical analysis of individual rare earth metals and oxides
稀土金属 |
2017-04-24 中国团体标准 |
| UNE-EN 1753:2020 规范/规程 |
Magnesium and magnesium alloys - Magnesium alloy ingots and castings
力学性能测试 |
2020-10-07 西班牙标准化协会 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证：京ICP证110310号
页面更新时间: 2026-06-01 06:45