美利体育登录入口官网

金属材料 布氏硬度试验 硬度值表

Metallic materials - Brinell hardness test - Table of hardness values

有机涂层抗快速形变(冲击)作用的标准测试方法

Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)

仪器压痕试验的标准实施规程

Standard Practice for Instrumented Indentation Testing

弹性地板短期压痕和残余压痕的标准试验方法

Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering

弹性地板覆盖层的短期压痕和残余压痕的标准试验方法

Standard Test Method for Short-Term Indentation and Residual Indentation of Resilient Floor Covering

金属材料焊缝破坏性试验.硬度试验.电弧焊接头硬度试验

Destructive tests on welds in metallic materials. Hardness testing. Hardness test on arc welded joints

弹性和层压地板覆盖物 压痕和残余压痕的测定 弹性地板覆盖物的短期压痕和残余压痕

Resilient and laminate floor coverings. Determination of indentation and residual indentation - Short-term indentation and residual indentation of resilient floor covering

瓦楞纸板测试 折痕

Testing of corrugated board - Creasings

结构管（凹点管）用于工艺美利体育官网首页网址的热传导 尺寸与材料

Structural tubes (dimpled tubes) for heat transfer dimensions and materials of process equipment

金属材料.UCI法的硬度试验.第1部分:试验方法

Metallic materials - Hardness testing with the UCI method - Part 1: Test method

纸板检验.折皱.第1部分:折皱试样的试验室制备

Testing of board - Creasings - Part 1: Laboratory producing of test creasings

纸板检验.折皱.第2部分:通过对折皱目测评定测定折皱范围

Testing of board - Creasings - Part 2: Determination of creasing range by visual assessment of creasings

折叠纸板的测试 折痕 第2部分：折痕的视觉评估

Testing of folding cartonboard - Creasings - Part 2: Visual assessment of creasings

折叠纸板测试 折痕 第2部分：折痕的目视评估

Testing of folding cartonboard - Creasings - Part 2: Visual assessment of creasings

折叠纸板的检验 压痕 第3部分：压痕技术质量的测定

Testing of folding cartonboard - Creasings - Part 3: Determination of the technical quality of creasings

折叠纸板的测试 折痕 第3部分：折痕技术质量的测定

Testing of folding cartonboard - Creasings - Part 3: Determination of the technical quality of creasings

卷材覆层金属 试验方法 第24部分：耐粘结性和压力标记（草案）

Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking

卷材覆层金属.试验方法.第24部分:耐粘结性和压力标记

Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking; German version EN 13523-24:2004

卷材涂层金属 试验方法 第24部分：抗粘连和压力标记

Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking

卷材涂层金属-测试方法-第24部分：抗粘连和压力标记

Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking; German version EN 13523-24:2017

卷材涂层金属 试验方法 第6部分：压痕后的粘合力 (深拉试验) （草案）

Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)

天然石材的试验方法根据努氏硬度测定

Test method for natural stone – determination of hardness according to Knoop

木质地板 耐刻痕性测定 试验方法（草案）

Wood flooring - Determination of resistance to indentation - Test method

木质地板 耐刻痕性测定 试验方法（草案）

Wood flooring - Determination of resistance to indentation - Test method

木质地板 耐刻痕性测定 试验方法

Wood flooring - Determination of resistance to indentation - Test method

木质地板.耐刻痕性测定.试验方法;德文版本EN 1534-2010

Wood flooring - Determination of resistance to indentation - Test method; German version EN 1534:2010

木地板和镶木地板 抗压痕性的测定 测试方法

Wood flooring and parquet - Determination of resistance to indentation - Test method; German version EN 1534:2020

高级工业陶瓷 室温下整体陶瓷的机械特征 第4部分：维氏、努氏和洛氏表面硬度（草案）

Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 4: Vickers, Knoop and Rockwell superficial hardness

弹性和叠层地板覆盖物.压痕和残留压痕测定.第1部分:残留压痕(ISO 24343-1-2007).德文版本EN ISO 24343-1-2012

Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation (ISO 24343-1:2007); German version EN ISO 24343-1:2012

弹性和强化地板覆盖物 压痕和残余压痕的测定 第1部分：残余压痕

Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation (ISO 24343-1:2007); German version EN ISO 24343-1:2012

金属材料.硬度试验.第1部分:试验方法(ISO 4545-1-2005).德文版本EN ISO 4545-1-2005

Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2005); English version of DIN EN ISO 4545-1:2006-03

金属材料 布氏硬度试验 第1部分：试验方法（草案）

Brinell hardness test of metallic materials Part 1: Test method (draft)

硬质合金.维氏硬度试验

Hardmetals; Vickers hardness test; identical with ISO 3878:1983

硫化或热塑性橡胶 硬度测定 第4部分：用硬度计法测定压痕硬度(肖氏硬度)

Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)

美利体育登录入口官网、评估、处理和预防天然气高压管道中的凹陷的方法

Methods for detecting, evaluating, treating and preventing dents in natural gas high pressure pipelines

硬质合金.维氏硬度试验(ISO 3878-1983)

Hardmetals; Vickers hardness test (ISO 3878:1983)

硬质合金以外的烧结金属材料.表观硬度的测定.大体沿截面硬度均匀的材料

Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Materials of essentially uniform section hardness

布氏硬度的测定法

Sponge titanium. Method for determination of Brinell hardness

国家计量基准体系 金属和合金 布氏硬度试验 第1部分：试验方法

State system for ensuring the uniformity of measurements. Metals and alloys. Brinell hardness test. Part 1. Test method

国家测量一致性保证体系.金属和合金.维氏硬度试验.标准块的校准

State system for ensuring the uniformity of measurements. Metals and alloys. Vickers hardness test. Part 3. Salibration of reference block

金属和合金.威克斯硬度试验.第1部分:测试方法

Metals and alloys. Vickers hardness test. Part 1. Test method

金属维氏硬度试验方法

Metal Vickers Hardness Test Method

金属材料 布氏硬度试验 第3部分:标准量块的校准 (ISO 6506-3:2014,IDT)

Metallic materials - Brinell hardness test. Part 3: Calibration of reference blocks.

色漆和清漆.杯吸试验

Paints and varnishes - Cupping test

硬金属.努氏硬度试验

Hardmetals - Knoop hardness test

弹性分层地板覆盖物.压痕和残留压痕的测定.第2部分:弹性地板覆盖物的短期残留压痕

Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 2: Short-term indentation and residual indentation of resilient floor covering

金属和其他无机覆盖层.维氏和努氏显微硬度检验

Metallic and other inorganic coatings - Vickers and Knoop microhardness tests

金属材料.努氏硬度试验.第3部分:参考块的校正

Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks

金属材料.维氏硬度试验.第3部分:标准块的校准

Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks

电阻焊. 凸焊. 电阻焊用凸焊

Resistance welding - Embossed projection welding - Projections for resistance welding

铆钉型触头用线材机械物理性能试验方法.第2部分:硬度测量

Methods for measuring mechanical and physical properies of wires for rivet contacts.Part 2:Determination of hardness

洛氏硬度试验 第1部分：试验方法

Rockwell Hardness Test - Part 1: Test Method

金属材料布氏硬度试验方法

Metallic materials - Test method of brinell hardness

油漆和清漆 外墙用木材的涂料和涂料系统 通过压入木基材上的涂层评估膜延展性

Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of film extensibility by indentation of a coating on a wooden substrate

金属卷材 试验方法 第24部分 压痕和粘着抗力

Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking

镀金属带卷 试验方法 第6部分：压痕试验后粘附性测定

Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)

运动场地表面 抗冲击性能测定

Surfaces for sports areas - Determination of resistance to impact

木地板和拼花地板 压痕阻力测定 试验方法

Wood flooring and parquet - Determination of resistance to indentation - Test method

金属材料 纽扣硬度测定 第3部分：校准基板（ISO 4545-3:2017）

Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks (ISO 4545-3:2017)

金属材料 布氏硬度测定 第4部分 硬度值表 (ISO 4545-4:2017)

Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO 4545-4:2017)

金属材料 布氏硬度试验 第1部分：试验方法（ISO 6506-1:2014）

Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)

金属材料 布氏硬度试验 第3部分：试验机的校准 (ISO 6506-3:2014)

Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2014)

金属材料 维氏硬度试验 第3部分：标准硬度块的校准（ISO 6507-3:2018）

Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2018)

光伏发电站柔性薄膜光伏组件机械性能测试 第4部分 压痕

Test method for mechanical properties of flexible thin-film photovoltaic modules of photovoltaic power station Part 4: Indentation test

油漆和清漆 室外木材用涂料和涂层系统 通过压痕评估木质基材上的涂层膜的延展性

Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of film extensibility by indentation of a coating on a wooden substrate

预应力钢 束

Prestressing steels - Strand

金属材料 硬度试验 布氏硬度试验机用标准块的校准

Metallic materials - Hardness testing - Calibration of standardised blocks to be used for Brinell hardness testing machines

金属材料 硬度试验 第3部分:洛氏硬度试验机用标准块的校准(A、B、C、D、E、F、G、H、K、N、T标度)

Metallic materials - Hardness test - Part 3: Calibration of standardised blocks to be used for Rockwell hardness testing machines (scales A,B,C,D,E,F,G,H,K,N,T)

卷材涂层金属 试验方法 第24部分：抗粘连和压力标记

Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking

金属涂箔 试验方法 第24部分：阻塞和压力标记的抵抗力

Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking

运动场地表面抗压痕的测定

Surfaces for sports areas - Determination of resistance to indentation

木地板抗压痕性测定试验方法

Wood flooring - Determination of resistance to indentation - Test method

木地板和条板地板 压痕抵抗力的测定 试验方法

Wood flooring and parquet - Determination of resistance to indentation - Test method

硬质合金 维氏硬度测试 (ISO 3878:1983)

Hardmetals - Vickers hardness test (ISO 3878:1983)

金属材料 硬度和材料参数的载荷显微压入试验 第2部分：试验机的验证与校准（ISO 14577-2:2015）

Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015)

金属材料 带有测量仪器的压入试验硬度和材料参数 第4部分：金属和非金属涂层的测试方法（ISO 14577-4:2016）

Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016)

金属和其他无机涂层 维氏和努氏显微硬度试验（ISO 4516:2002）

Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002)

金属材料 努氏硬度试验 第1部分:试验方法(ISO 4545-1:2005)

Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2005)

金属材料 科诺普硬度试验 第3部分：参考块的校准（ISO 4545-3:2017）

Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks (ISO 4545-3:2017)

金属材料 布氏硬度试验 第3部分:标准块的校准(ISO 6506-3:1999)

Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:1999)

硫化橡胶或热塑性橡胶 使用极低橡胶硬度（VLRH）标度测定静载硬度（ISO 27588:2012 IDT）

Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 27588:2012, IDT)

印刷智能工厂 纸盒折痕挺度与开合力控制及美利体育登录入口官网方法

Smart factory of printing—The method of control and test methods of crease stiffness and opening force in carton

金属材料-硬度和材料参数的仪器化压痕试验-第4部分：金属和非金属涂层的试验方法（ISO 14577-4:2016）

Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016)

金属材料 维氏硬度测试 第3部分：参考块的校准

Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2018)

金属材料焊缝的破坏性试验 硬度试验 第1部分：电弧焊接头的硬度试验（ISO 9015-1:2001）

Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001)

塑料和橡胶硬度测试

Hardness testing of plastics and rubber

金属材料硬度美利体育登录入口官网

Hardness testing of metallic materials

塑料 橡胶硬度测试

Hardness testing of plastics and rubber