| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| ASTM D6559-00A(2016)e1 试验方法标准 |
烘烤碳阳极和阴极块的热重(TGA)空气反应性测定的标准测试方法 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
焙烧阳极 |
2016-04-01 美国材料与试验协会 |
| ASTM D6559-22 试验 |
测定焙烧碳阳极和阴极块的热重(TGA)空气反应性的标准试验方法 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
|
2022-05-01 美国材料与试验协会 |
| ASTM RR-D02-1495 2000 试验 |
D6559-测定烘烤碳阳极和阴极块的热重(TGA)空气反应性的测试方法 D6559-Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
|
2000 美国材料与试验协会 |
| BS 6043-3.3:2000 试验 |
制铝工业用含碳材料的取样和试验方法.电极.用尺寸法测定阴极碳块和预焙阳极的体密度(表观密度) Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of the bulk density (apparent density) of cathode blocks and prebaked anodes using a dimensions method
|
2000-10-15 英国标准学会 |
| BS 6043-3.6:2000 试验 |
铝制造中使用的碳质材料的取样和测试方法 电极 环境温度下阴极块和预烘烤阳极电阻率的测定 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of electrical resistivity of cathode blocks and prebaked anodes at ambient temperature
电阻率 预焙阳极 |
2000-10-15 英国标准学会 |
| BS ISO 11713:2025 试验标准 |
Carbonaceous materials used in the production of aluminium. Cathode blocks and baked anodes. Determination of the specific electrical resistivity at ambient temperature
比电阻 焙烧阳极 |
2025-05-31 英国标准学会 |
| BS ISO 15379-1:2019 试验标准 |
用于生产铝的碳质材料 阴极块材料 施加压力时钠渗透引起的膨胀的测定 Carbonaceous materials for the production of aluminium. Cathode block materials - Determination of the expansion due to sodium penetration with application of pressure
|
2019-12-31 英国标准学会 |
| GOST R 54252-2010 规程 |
用于铝生产的碳素材料.抽样计划和单位的个别采样.第1部分.下模脚 Carbonaceous materials used in the production of aluminium. Sampling. General requirements. Part 1. Bottom blocks
|
2010 俄罗斯标准局 |
| GOST R 54252-2010(2019) 试验 |
用于铝生产的碳素材料.抽样计划和单位的个别采样.第1部分.下模脚 Carbonaceous materials used in the production of aluminium. Sampling. General requirements. Part 1. Bottom blocks
|
2010-01-01 俄罗斯标准局 |
| GOST R ISO 11713-2014 试验 |
铝生产用碳质材料. 阴极块和焙制阳极. 环境温度下电阻率的测定 Carbonaceous materials used in the production of aluminium. Cathode blocks and baked anodes. Determination of electrical resistivity at ambient temperature
焙烧阳极 碳素材料 |
2014 俄罗斯标准局 |
| GOST R ISO 12986-2-2015 试验 |
铝生产用碳质材料. 预焙阳极和阴极碳块. 第2部分. 利用四点法测定弯曲强度 Carbonaceous materials used in the production of aluminium. Prebaked anodes and cathode blocks. Part 2. Determination of flexural strength by the four - point method
抗弯强度 焙烧阳极 |
2015 俄罗斯标准局 |
| ISO 11713:2000 试验 |
Carbonaceous materials used in the production of aluminium - Cathode blocks and baked anodes - Determination of electrical resistivity at ambient temperature
焙烧阳极 电阻率 |
2000-05 国际标准化组织 |
| ISO 11713:2025 |
Carbonaceous materials used in the production of aluminium — Cathode blocks and baked anodes — Determination of the specific electrical resistivity at ambient temperature
比电阻 焙烧阳极 |
2025-05-23 国际标准化组织 |
| ISO 15379-2:2004 试验 |
铝生产用碳质材料.阴极块材料.第2部分:无压力作用下由于钠渗透引起的膨胀的测定 Carbonaceous materials for the production of aluminium - Cathode block materials - Part 2: Determination of the expansion due to sodium penetration without application of pressure
膨胀 |
2004-06 国际标准化组织 |
| ISO 8007-1:1999 试验 |
铝生产用碳素材料 单个材料的取样方案和取样 第1部分:阴极块 Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Part 1: Cathode blocks
抽样计划 |
1999-08 国际标准化组织 |
| ISO 9088:1997 试验 |
铝生产用碳素材料 预焙阳极和阴极块 用比重瓶法测定二甲苯密度 Carbonaceous materials used for the production of aluminium - Cathode blocks an prebacked anodes - Determination of the density in xylene by a pyknometric method
真密度 预焙阳极 |
1997-03 国际标准化组织 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号
页面更新时间: 2026-05-07 12:29