美利体育登录入口官网

无压力地下排水和排污塑料管道系统.聚乙烯(PE).第1部分:管、管件和系统用规范

Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE). Specifications for pipes, fittings and the system

用于改造地下供气网络的塑料管道系统 内衬紧密配合的管道

Plastics piping systems for renovation of underground gas supply networks. Lining with close-fit pipes

塑料.热塑性塑料熔体质量流动速率(MFR)和熔体熔体体积流动速率(MVR)的测定.对时间温度历程和或湿度敏感材料的方法

Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Method for materials sensitive to time-temperature history and/or moisture

塑料 聚苯乙烯（PS）模塑和挤出材料 命名系统和规格基础

Plastics. Polystyrene (PS) moulding and extrusion materials - Designation system and basis for specifications

塑料.苯乙烯/丙烯腈(SAN)共聚物的模塑和挤塑材料.名称与符号系统和规范基础

Plastics - Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials - Designation system and basis for specifications

塑料.聚碳酸酯模塑和挤塑材料.命名系统和规范基础

Plastics - Poly(methyl methacrylate)(PMMA) moulding and extrusion materials - Designation system and basis for specifications

淀粉基生物降解塑料母料

Starch-based biodegradable plastic masterbatch

塑料成型用吸水剂

Water Absorbent for Plastic Molding

多层管.聚烯烃铝多层管.一般要求和试验

Multilayer pipes - Polyolefin-Aluminium-Multilayer pipes - General requirements and testing

多层管 聚烯烃-铝-多层管 一般要求和测试

Multilayer pipes - Polyolefin-Aluminium-Multilayer pipes - General requirements and testing

聚乙烯 (PE) 管 无压设施用高密度聚乙烯 一般质量要求, 尺寸和试验

Polyethylene (PE) pipes - PE-HD for pressureless applications - General quality requirements, dimensions and testing

具有异形壁和内部光滑管的热塑性材料制成的管道和配件 地下安装用 DN 1200 以上的大型管道 第2部分：管道和配件规范

Pipes and fittings made of thermoplastic materials with profiled wall and smooth pipe inside - Large pipes over DN 1200 for underground installation - Part 2: Specifications for pipes and fittings

聚乙烯(PE)管道 PE 80,PE 100型 一般试验质量要求

Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing

聚乙烯(PE)管道.PE 80,PE 100型.一般试验质量要求.德文版和英文版

Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing; Text in German and English

聚乙烯(PE)管道. PE 80,PE 100型. 一般试验质量要求. 德文和英文文本

Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing; Text in German and English

聚乙烯（PE）管材 PE 80、PE 100 一般质量要求、测试

Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing; Text in German and English

给排水以及压力排污用塑料管道系统.聚乙烯(PE).第1部分:总则;德文版本EN 12201-1-2011

This part of EN 12201 specifies the general aspects of poyethylene (PE) - pressure piping systems (mains and service pipes)for buried or above ground applications. intended for the conveyance of water for human consumption,raw water prior to treatment, dr

供气塑料管道系统 聚乙烯 (PE) 第1部分：概述

Plastic piping systems for gas supply Polyethylene (PE) Part 1: General

塑料.热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定.第1部分:标准方法(ISO 1133-1-2011).德文版本 EN ISO 1133-1-2011

Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011); German version EN ISO 1133-1:2011

塑料 热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定 第2部分：对时间 温度历程与/或湿气敏感的材料所用的方法（草案）

Determination of melt mass flow rate (MFR) and melt volume flow rate (MVR) of plastic thermoplastics Part 2: Method for materials sensitive to time temperature history and/or moisture (draft)

塑料.热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定.第2部分:对时间-温度历程与/或湿气敏感的材料所用的方法(ISO 1133-2-2011). 德文版本EN ISO 1133-2-2011

Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011); German version EN ISO 1133-2:2011

塑料 热塑性塑料熔体质量流动速率（MFR）和熔体体积流动速率（MVR）的测定 第2部分：对时间-温度历史和/或湿度敏感材料的方法

Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011); German version EN ISO 1133-2:2011

塑料热塑性塑料熔体质量流动速率（MFR）和熔体体积流动速率（MVR）的测定

Plastics – Determination of melt mass flow rate (MFR) and melt volume flow rate (MVR) of thermoplastics

聚乙烯挤出片材(PE-HD)要求和测试方法

Extruded sheets of polyethylene (PE-HD) - Requirements and test methods (ISO 14632:2021); German version EN ISO 14632:2021

塑料.乙烯/乙烯醇(EVOH)共聚物模塑和挤塑材料.第1部分:命名系统和基本规范

Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 1 : Designation system and basis for specifications (ISO 14663-1:1999); English version of DIN EN ISO 14663-1:2006-06

塑料 聚乙烯(PE)模塑和挤出材料 第1部分：命名体系与基础规范（草案）

Plastic polyethylene (PE) molding and extrusion materials Part 1: Nomenclature system and basic specifications (draft)

塑料.聚乙烯(PE)模塑和挤出材料.第1部分:命名体系与基础规范(ISO 17855-1-2014);德文版本EN ISO 17855-1-2014

Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 17855-1:2014); German version EN ISO 17855-1:2014

塑料 聚乙烯（PE）成型和挤出材料 第1部分：命名系统和规格基础

Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 17855-1:2014); German version EN ISO 17855-1:2014

塑料 - 抗冲击聚苯乙烯 (PS-I) 成型和挤出材料 - 第 1 部分：命名系统和规格基础 (ISO 19063-1:2015)

Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19063-1:2015); German version EN ISO 19063-1:2015

塑料.苯乙烯/丙烯腈(SAN)模塑和挤塑材料.第1部分:命名体系和基本规范(ISO 19064-1-2015).德文版本EN ISO 19064-1-2015

Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19064-1:2015); German version EN ISO 19064-1:2015

塑料.聚丙烯(PP)模塑和挤塑材料.第1部分:标示系统和规范基础(ISO 19069-1-2015);德文版本EN ISO 19069-1-2015

Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19069-1:2015); German version EN ISO 19069-1:2015

塑料 聚苯硫醚（PPS）模塑和挤出材料 第2部分：试样的制备和性能测定（ISO 20558-2:2018）

Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties (ISO 20558-2:2018)

塑料 乙烯/醋酸乙烯酯（E/VAC）成型和挤出材料 第1部分：名称和规范（ISO/DIS 21301-1:2017）

Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 1: Designation and specification (ISO/DIS 21301-1:2017); German and English version prEN ISO 21301-1:2017

塑料 超高分子量聚乙烯（PE-UHMW）成型和挤出材料 第2部分：测试样品的制备和性能测定

Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021); German version EN ISO 21304-2:2021

塑料 乙烯/乙烯醇（草案）

Plastic Ethylene/Vinyl Alcohol (Draft)

塑料 乙烯/乙烯醇（EVOH）共聚物模塑和挤出材料 第1部分：命名系统和规范基。↖SO 21309-1:2019）

Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21309-1:2019)

塑料 聚酮（草案）

Plastic polyketone (draft)

塑料. 聚苯乙烯(PS)模塑和挤塑材料. 第1部分: 命名系统和规格依据(ISO 24022-1-2020); 德文版 EN ISO 24022-1-2020

Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24022-1:2020); German version EN ISO 24022-1:2020

塑料.耐冲击聚苯乙烯模塑和挤出材料.第1部分:命名体系与基础规范

Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2897-1:1997); German version EN ISO 2897-1:1999

塑料.耐冲击聚苯乙烯(PS-I)模塑和挤塑材料.第2部分:试样制备和性能测定

Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2897-2:2003); German version EN ISO 2897-2:2003

塑料.乙酸乙烯/乙烯基乙酸酯(E/VAC)模塑和挤出材料.第1部分:名称与规范（ISO 4613-1-1993)

Plastics - Ethylen/vinyl acetate (E/VAC) moulding and extrusion materials - Part 1: Designation and specification (ISO 4613-1:1993); German version EN ISO 4613-1:1999

塑料.苯乙烯/丙烯腈(SAN)共聚物的模塑和挤塑材料.第1部分:命名体系和基本规范

Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 4894-1:1997); German version EN ISO 4894-1:1999

塑料.聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料.第1部分:命名体系和基本规范

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8257-1:1998); English version of DIN EN ISO 8257-1:2006-06

加热元件摆动弯曲焊接技术

Heating Element Swivel Bending Welding of Sheets from PP and PE for Thermoplastic Plastics

塑料.丙烯腈-丁二烯-苯乙烯(ABS)模塑和挤出材料.第1部分:命名系统和分类基础

Plastics.Acrylonitrile-butadiene-styrene(ABS) moulding and extrusion materials.Part 1:Designation system and basis for specifications

塑料 聚甲醛（POM）模塑和挤出材料 第1部分：命名系统和分类基础

Plastics—Polyoxymethylene(POM) moulding and extrusion materials—Part 1:Designation system and basis for specification

塑料 热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定 第1部分：标准方法

Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 1:Standard method

塑料 再生塑料 第10部分：聚对苯二甲酸丁二醇酯（PBT）材料

Plastics - Recycled plastics - Part 10: Polybutylene terephthalate (PBT) materials

塑料 再生塑料 第4部分：聚烯烃混合物(MPO)材料

Plastics — Recycled plastics — Part 4: Polyolefin mixtures (MPO) materials

塑料 再生塑料 第7部分：聚碳酸酯(PC)材料

Plastics—Recycled plastics—Part 7: Polycarbonate(PC) materials

地下无压排水管网非开挖修复用塑料管道系统 第 3 部分：紧密贴合内衬法

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks—Part 3: Lining with close-fit pipes

塑料 乙烯-乙烯醇（EVOH）共聚物模塑和挤出材料 第1部分：命名系统和分类基础

Plastics—Ethylene-vinyl alcohol (EVOH) copolymer moulding and extrusion materials—Part 1：Designation system and basis for specifications

聚丙烯包装容器 掺杂回收塑料初筛测试方法构建指南

Guidelines for the Construction of a Preliminary Screening Test Method for Adulterated Recycled Plastics in Polypropylene Packaging Containers

塑料.测定热塑塑料的熔体质量流动速率(MFR)和熔体容积流量速率(MVR).第1部分:标准方法

Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method

塑料.测定热塑塑料的熔体质量流动速率(MFR)和熔体容积流量速率(MVR).第2部分:对时间.温度历程与/或湿气敏感的材料所用的方法

Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture

塑料 乙烯/乙烯醇(EVOH)共聚物模塑和挤塑材料 第1部分:命名系统和基本规范

Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 1: Designation system and basis for specifications

塑料.聚乙烯(PE)模塑和挤塑材料.第2部分:试样制备和性能测定

Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

塑料 - 聚苯乙烯（ps）成型和挤出材料 - 第2部分:试样的制备和性能的测定

Plastics — Polystyrene (PS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties

塑料.PPS塑料(聚苯硫醚)模制和挤压材料.第2部分:试样制备和特性测定

Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

塑料 苯乙烯/丙烯腈(SAN)模塑和挤塑材料 第1部分:命名体系和基本规范

Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications

塑料管道系统.灌溉用聚乙烯(PE)管道.规范

Plastics piping systems - Polyethylene (PE) pipes for irrigation - Specifications

电线电缆用聚全氟乙丙烯树脂

FEP-Fluorocarbon for wire and cable

塑料 聚苯硫醚（PPS）成型和挤出材料 第2部分：试验试样的制备和性能测定（ISO 20558-2:2018）

Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties (ISO 20558-2:2018)

塑料 乙烯 醋酸乙烯共聚物（EVAC）模塑和挤出材料 第1部分：标识体系和规范基础 (ISO 21301-1:2019)

Plastics - Ethylene-vinyl acetate (EVAC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21301-1:2019)

塑料 乙烯和醇乙烯（EVOH）共聚物的注塑和挤出材料 第1部分：标识系统和规范基。↖SO 21309-1:2019）

Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21309-1:2019)

塑料 聚甲基丙烯酸甲酯（PMMA）模塑和挤出材料 第1部分：命名体系和规范基。↖SO 24026-1:2020）

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24026-1:2020)

塑料 聚甲醛（POM）的模塑和挤出材料 第1部分：标识系统和规范基。↖SO 29988-1:2019）

Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 29988-1:2019)

聚丙烯树脂粉料 第2部分：连续法

Polypropylene resin powder part 2: continuous method

燃气管道系统用聚乙烯(PE)专用料

Polyethylene(PE) materials for piping systems of gaseous fuels supply

塑料.高密度聚乙烯非牛顿指数（NNI）的测定

Plastics.Determination of non-Newtonian index(NNI)for high density polyethylene

塑料 纺粘法非织造布用聚丙烯树脂

Polypropylene resin for plastic spunbond nonwovens

塑料 发泡用聚丙烯(PP)树脂

Plastics－Polypropylene(PP) resin for foaming

热塑性塑料 熔体质量流动速率（MFR）和熔体体积流动速率（MVR）的测定 第2部分：对时间 温度历史和/或水分敏感材料的方法（ISO 1133-2:2011）

Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)

塑料 热塑性塑料熔体质量流动速率（MFR）和熔体体积流动速率（MVR）的测定（ISO 1133:2005）

Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:2005)

聚乙烯（HD-PE）挤出片材 要求和试验方法（ISO 14632:2021）

Extruded sheets of polyethylene (PE-HD) - Requirements and test methods (ISO 14632:2021)

塑料 聚丙烯（PP）模塑和挤压材料 第1部分：命名体系和规范基。↖SO 1873-1:1995）

Plastics - Polypropene (PP) moulding and extrusion materials - Part 1: Designation system and basisfor specifications (ISO 1873-1:1995)

与输送气体燃料的聚乙烯管道一起使用的聚乙烯配件 公制系列 规范 第2部分：对接熔接用承插式配件、使用加热工具的承插式配件以及与电熔配件一起使用的承插式配件

Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series - Specifications - Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings

气体燃料供给用聚乙烯管道用聚乙烯配件 公制系列 规范 第3部分：电熔配件

Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series - Specifications - Part 3: Electrofusion fittings

建筑物内部土壤和废水排放（低温和高温）的塑料管道系统 聚乙烯（PE）（等同采用ISO 8770:2003）

Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE) (ISO 8770:2003, IDT)

热塑性弹性体 熔体质量流动速率和熔体体积流动速率的测定

Thermoplastic elastomer - Determination of the melt mass-flow rate and melt volume-flow rate

聚偏氟乙烯树脂

Polyvinylidene fluoride resin

可熔性聚四氟乙烯树脂

Fusible polytetrafluoroethylene resin

聚全氟乙丙烯树脂

FEP resin

乙烯-四氟乙烯共聚树脂

Ethylene-tetrafluoroethylene copolymer resin

聚三氟氯乙烯树脂

PTFE resin

防护服用聚乙烯（PE）透气膜专用料

Special material for polyethylene (PE) breathable film for protective clothing

聚全氟乙丙烯（FEP）树脂

Fluorinated ethylene-propylene(FEP) resin

塑料 聚乙烯（PE）模塑和挤出材料 第1部分：命名系统和规范基。↖SO 17855-1:2014）

Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 17855-1:2014)

塑料 耐冲击聚苯乙烯（PS-I）模塑和挤出材料 第2部分：试样的制备和性能测定（ISO 2897-2:2003）

Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2897-2:2003)

塑料 聚甲基丙烯酸甲酯（PMMA）模塑和挤出材料 第2部分：试样的制备和性能测定（ISO 8257-2:2001）

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8257-2:2001)