美利体育登录入口官网

UNS N08935 适用于石油和天然气的新型多功能等级

UNS N08935

在役3D分析管线钢氢诱发裂纹行为以探究酸性环境严苛度

In-service 3D analysis of hydrogen-induced cracking behavior of pipeline steel to explore the severity of sour environment

基于渗透氢和HIC/SSC敏感性的腐蚀环境严重程度

Severity of corrosive environments based on hydrogen penetration and HIC/SSC susceptibility

在氢环境下典型管道和站内管的敏感性研究

Sensitivity Study Of Typical Pipelines And Station Pipes In Hydrogen Environment

在线观察管线钢氢致裂纹起始位置的技术

Technology for online observation of the starting position of hydrogen-induced cracks in pipeline steel

材料性能对厚壁X65 TMCP钢板酸性服役性能的影响

Impact of material properties on the performance of thick-wall X65 TMCP plate steel for sour service

关于地上管线断裂分析中裂纹含义的潜在角色 氢的作用

Implication of Fractographic Analysis of the Crack in an Above Ground Pipeline – Potential Role of Hydrogen

HLP 溶液具有广泛的缓冲能力 适合在弱酸性条件下进行长期 HIC 测试

Wide range buffering capacity of HLP solution for long-term HIC testing under mildly sour conditions

商品级管线管在不太严重酸性条件下的氢致裂纹测试准则

Test Criteria for Hydrogen-induced Cracking of Commodity-grade Line Pipe in Less Severe Sour Conditions

氢脆对高压氢服务厚壁Cr-Mo钢反应器最低加压温度的影响 RP 934-F初稿技术基础

Effect of Hydrogen Embrittlement on Minimum Pressurization Temperature of Thick-Walled Cr-Mo Steel Reactors for High-Pressure Hydrogen Service RP 934-F Preliminary Technical Foundation

现代2?Cr-1Mo ?V钢在溶解内氢和H2环境下的亚临界裂纹

Subcritical cracking of modern 2?Cr-1Mo ?V steel in dissolved hydrogen and H2 environments

环境辅助裂纹：风险评估和评价的预测方法

Environmentally Assisted Cracking: A Predictive Approach for Risk Assessment and Evaluation

钢产品耐氢诱发断裂(HIC)的评估

Evaluation of resistance of steel products to hydrogen induced cracking (HIC)

石油和天然气工业. 油、气生产中含硫化氢(H2S)环境下使用的材料. 耐裂化材料选择的一般原则

Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. General principles for selection of cracking-resistant materials

石油、石化和天然气工业. 油、气生产中含硫化氢(H2S)环境下使用的材料. 耐裂化碳和低合金钢及铸铁的使用

Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Cracking-resistant carbon and low-alloy steels, and the use of cast irons

高强度钢建筑构件氢致脆性断裂的预防第2部分：试验方法

Prevention of hydrogen-induced brittle fracture of high-strength steel building elements - Part 2: Test methods

承压钢扁平轧材.第2部分:具有规定的耐高温性能的非合金钢和合金钢.英文版本EN 10028-2-2009

Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties; English version of DIN EN 10028-2:2009-09

压力用钢制成的扁平产品 第2部分：具有特定高温性能的非合金钢和合金钢

Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties

钢制品抗氢脆裂性能(HIC)性能的评估

Evaluation of resistance of steel products to hydrogen induced cracking (HIC); German version EN 10229:1998

钢材抗氢致开裂（HIC）性能评价

Evaluation of resistance of steel products to hydrogen induced cracking (HIC); German version EN 10229:1998

石油与天然气工业 油气产品含H2S的条件下使用的原料 第2部分：抗裂材料(ISO 15156-1) 选择一般性原则

Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials

石油与天然气工业.油气产品含H2S的条件下使用的原料.第2部分: 抗裂材料选择一般性原则(ISO 15156-1-2015).德文版本EN ISO 15156-1-2015

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials; (ISO 15156-1:2015) German version EN ISO 15156-1:2015

石油和天然气工业 油,气生产中含硫化氢(H2S)环境下使用的材料 第2部分：耐裂化碳钢和低合金钢及铸铁的使用（草案）

Oil and gas industry Materials used in environments containing hydrogen sulfide (H2S) in oil and gas production Part 2: Use of cracking-resistant carbon and low alloy steels and cast irons (draft)

碳钢美利体育官网首页网址在湿H?S服务中的使用指南

A Working Guide for Carbon Steel Equipment in Wet H2S Service

金属和合金的腐蚀 应力腐蚀试验 第11部分:金属和合金氢脆和氢致开裂试验指南

Corrosion of metals and alloys—Stress corrosion cracking—Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking

石油天然气工业 油气开采中用于含硫化氢环境的材料 第1部分:选择抗裂纹材料的一般原则

Petroleum and natural gas industries- Material for use in HS-containing environments in oil and gas production- Part 1: General principles for selection of cracking-resistant materials

管线钢和压力容器钢抗氢致开裂评定方法

Evaluation of pipeline and pressure vessel steels for resistance to hydrogen-induced cracking

石油与天然气行业.石油与天然气生产中H2S环境下使用的材料.第1部分:选择抗裂材料的一般原则

Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Part 1. General principles for selection of cracking-resistant materials

石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第1部分:耐裂化材料选择的一般原则

Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials

石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第2部分:耐裂化碳钢和低合金钢及铸铁的使用

Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons

承压用扁钢制品.技术交付条件.第2部分:具有指定升温属性的非合金钢与合金钢

Steel flat products for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steels with specified elevated temperature properties

承压用扁钢制品.技术交付条件.第3部分:正火可焊细晶粒结构钢

Steel flat products for pressure purposes - Technical delivery conditions - Part 3: Weldable fine grain steels, normalized

平板钢制压力容器 第3部分：细晶粒细化焊接钢板

Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized

金属和合金的腐蚀 应力腐蚀试验 第11部分：金属和合金抗氢脆和氢致开裂的试验指南（ISO 7539-11:2013）

Corrosion of metals and alloys - Stress corrosion testing - Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking (ISO 7539-11:2013)

2013版NACE国际出版物8X294关于湿态H?S中钢铁腐蚀的研究报告

Review of Published Literature on Wet H2S Cracking of Steels Through 1989 (2013 Edition)

回顾 1989 年关于钢湿 H2S 裂解的已发表文献（货号 24185）

Review of Published Literature on Wet H2S Cracking of Steels Through 1989 (Item No. 24185)

CO₂和H₂S对API 5L-B及X52级钢材的腐蚀行为

Corrosion Behavior of API 5L-B and X52 Grade Steels in CO2 and H2S

材料在 sour 气体服务环境中的适用性评估

Evaluation of materials suitability for sour gas service environments

氢化硫（HzS）在工程合金行为中的角色

The role of hydrogen sulfide (HzS) in the behavior of engineering alloys

湿H2S环境下的现有石油炼制装置用压力容器裂纹美利体育登录入口官网、修复和减轻指南

Guidelines for the Detection, Repair, and Mitigation of Cracking of Existing Petroleum Refinery Pressure Vessels in Wet H2S Environments

湿硫化氢裂纹

Wet hydrogen sulfide cracks

NACE Paper 00434-1999

SOHIC - SO WHAT?

高压氟化氢裂解装置中合金性能调查

Investigation of alloy properties in high pressure hydrogen fluoride cracking unit

压力容器用硫化物应力腐蚀裂纹抗性钢的应用

Application of sulfide stress corrosion cracking resistant steel for pressure vessels

压力容器钢在酸性环境中的微观结构对氢诱发裂纹和硫化物应力腐蚀开裂性能的影响

Effect of Microstructure of Pressure Vessel Steel on Hydrogen Induced Cracking and Sulfide Stress Corrosion Cracking in Sour Environment

SA 516 70 级钢在近中性至高 PH 值溶液中的氢致开裂失效：第1部分现场调查

HYDROGEN INDUCED CRACKING FAILURE OF SA 516 GRADE 70 STEEL IN NEAR NEUTRAL TO HIGH PH SOLUTION: PART 1 FIELD INVESTIGATION

利用MFL硬点技术管理HIC影响管道

Managing HIC-impacted pipelines with MFL hardpoint technology

ASTM A516 压力容器钢板的氢致开裂和微观带状的明显影响

Hydrogen Induced Cracking of ASTM A516 Pressure Vessel Plate Steels and the Apparent Effect of Microscopic Banding

长期评估HLP溶液在轻度酸性环境中的HIC性能

Long-term evaluation of HIC performance of HLP solutions in mildly acidic environments

在位氢诱发裂纹观察方法用于分析氢诱导裂纹

In-situ hydrogen-induced crack observation method for analyzing hydrogen-induced cracks

高频率感应焊接管(HFI)残余应力对HIC抗性的效应

Effect of residual stress in high frequency induction welded pipe (HFI) on HIC resistance

氧污染对低合金钢H2S脆化测试环境的影响及其测试结果的影响

Effect of oxygen contamination on the H2S embrittlement test environment of low alloy steel and its influence on the test results

高强钢的氢渗透和结合能研究

Study on Hydrogen Permeation and Binding Energy of High Strength Steel

水中溶解H₂S对低碳钢腐蚀的影响：氧气污染的作用

Effect of dissolved H2S in water on corrosion of mild steel: the role of oxygen contamination

柔性铠装钢丝在H₂S环境中的氢诱发裂纹（HIC）研究

Study on Hydrogen Induced Cracking (HIC) of Flexible Armor Steel Wire in H2S Environment

石油炼厂湿H?S环境中的腐蚀与应力开裂

Detection, Repair, and Mitigation of Cracking in Refinery Equipment in Wet H?S Environments

管道和压力容器钢的抗氢致开裂性能评估（货号 21215）

Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking (Item No. 21215)

酸性环境可燃流体输送管道焊接规程

Welding specification of combustible medium piping in acid service condition

石油和天然气工业 石油和天然气生产中含 H2S 环境使用的材料 第1部分：抗开裂材料选择的一般原则（ISO 15156-1:2009）

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2009)

石油和天然气工业 含H2S环境用材料 第1部分：裂变抗性材料的选择一般原则（ISO 15156-1:2020）

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2020)

高含硫化氢气田集输管道安全规程

Safety regulations for gathering and transmission pipelines in high hydrogen sulphide gas field

内覆或衬里耐蚀合金复合管道环焊缝焊接工艺评定

Welding procedure qualification of girth welds of corrosion resistant alloy clad or lined steel pipeline

压力用钢制成的扁平产品 第2部分：具有特定高温性能的非合金钢和合金钢

Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties

压力用钢制成的扁平产品 第3部分：可焊接细晶粒钢，正火

Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized

充氢环境下钢材的性能

Performance of Steels in Hydrogen Charging Environments

氢致开裂的试验方法

Test Methods for Hydrogen Induced Cracking

酸性环境下钢材的冶金研究

Metallurgical Studies of Steels for Sour Service Environments

氢气服务的韧性、断裂和适用性

Toughness, Fracture and Fitness for Hydrogen Service

工艺美利体育官网首页网址和钢材在充氢环境下的开裂敏感性

The Susceptibility of Process Equipment and Steels to Cracking in Aqueous Hydrogen Charging Environments

Progress Reports Volume 62 No. 01-02 2007

Progress Reports Volume 62 No. 01-02 2007

抗湿硫化氢腐蚀钢板

Wet hydrogen sulfide corrosion resistant steel plate