美利体育登录入口官网

铁、钢和其他黑色金属的采样和分析 分析方法 多元素方法 电感耦合等离子体原子发射光谱法测定镍、铜、钴含量 铜含量的测定

Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods. Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of copper c...

钢铁材料的化学分析.非合金和低合金钢的电感耦合等离子体光学发射光谱分析.硝酸和硫酸溶解后Si、Mn、P、Cu、Ni、Cr、Mo及Sn的测定[常规方法]

Chemical analysis of ferrous materials. Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels. Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routi

碳钢喷嘴 - PN 10 至 PN 40

Carbon steel nozzles - PN 10 to PN 40

工艺美利体育官网首页网址用半蛇形管

Half-pipe coil jackets for process equipment

旋涡状管.尺寸和材料

Swirlpipes - Dimensions and materials

有轨车辆材料.钢.第2部分:厚度<=3mm的冷轧扁平制品用非合金钢.选用标准

Materials for rail vehicles - Steels - Part 2: Unalloyed steels for cold rolled flat products 3 mm thickness; selected standard

钢的等级定义和划分

Definition and classification of grades of steel; German version EN 10020:2000

非合金钢和细晶粒钢的热成品结构空心型材 第1部分：交货技术条件

Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions; German version EN 10210-1:2006 / Note: To be replaced by DIN EN 10210-1 (2016-01), DIN EN 10210-2 (2016-02).

非合金钢和细晶粒钢冷成型焊接结构空心型材 第1部分：交货技术条件

Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions; German version EN 10219-1:2006 / Note: To be replaced by DIN EN 10219-1 (2016-01), DIN EN 10219-2 (2016-02).

对焊管管件.第1部分:一般用途和无特殊检验要求的锻造碳钢

Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements; German version EN 10253-1:1999

对焊管件 第1部分：一般用途且无特殊检验要求的锻制碳钢

Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements; German version EN 10253-1:1999

光亮钢制品.交货技术条件.第2部分:一般工程用钢

Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes; English version of DIN EN 10277-2:2008-06

机械和一般工程用无缝圆形钢管 交货技术条件 第1部分：非合金和合金钢管

Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes; German version EN 10297-1:2003

不合金钢水管配件 压接端配件

Stainless Steel Water Pipe Fittings Crimp End Fittings

石油和天然气工业 油,气生产中含硫化氢(H2S)环境下使用的材料 第2部分：耐裂化碳钢和低合金钢及铸铁的使用（草案）

Oil and gas industry Materials used in environments containing hydrogen sulfide (H2S) in oil and gas production Part 2: Use of cracking-resistant carbon and low alloy steels and cast irons (draft)

非合金钢.低碳含量的测定.第2部分:感应炉燃烧后红外线吸收法

Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:1999); German version EN ISO 15349-2:2003

焊接消耗品 非合金钢和细粒钢的钨惰性气体焊用焊条、焊丝和沉积物 分类（草案）

Welding consumables Classification of electrodes, wires and deposits for tungsten inert gas welding of non-alloy and fine-grained steels (draft)

钢 锰含量的测定 电感藕合等离子体原子发射光谱测定法

Steel - Determination of maganese content - Inductively coupled plasma atomic emission spectrometric method

钢和铁 镍、铜和钴含量的测定 电感耦合等离子体原子发射光谱分析法 第2部分:镍含量的测定

Steel and iron - Determination of nickel, copper and cobalt contents - Inductively coupled plasma atomic emission spectrometric method - Part 2: Determination of nickel content

钢和铁 镍、铜和钴含量的测定 电感耦合等离子体原子发射光谱分析法 第3部分:铜含量的测定

Steel and iron - Determination of nickel, copper and cobalt contents - Inductively coupled plasma atomic emission spectrometric method - Part 3: Determination of copper content

钢和铁 镍、铜和钴含量的测定 电感耦合等离子体原子发射光谱分析法 第4部分:钴含量的测定

Steel and iron - Determination of nickel, copper and cobalt contents - Inductively coupled plasma atomic emission spectrometric method - Part 4: Determination of cobalt content

压力用途的焊接钢管 交货技术条件 第4部分:规定高温性能的埋弧焊接非合金钢管和合金钢管

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties

压力用途的焊接钢管 交货技术条件 第5部分:规定低温性能的埋弧焊接非合金钢管和合金钢管

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties

钢 分类 第1部分：按化学成分将钢分为非合金钢和合金钢 (ISO 4948-1:1982, IDT)

STEELS – CLASSIFICATION – PART 1: CLASSIFICATION OF STEELS INTO UNALLOYED AND ALLOY STEELS BASED ON CHEMICAL COMPOSITION (ISO 4948-1:1982, IDT)

调质钢 第2部分:非合金优质钢的交货技术条件(包括修订版A1:1996)

Quenched and tempered steels - Part 2: Technical delivery conditions for unalloyed quality steels (includes amendment A1:1996)

非合金钢 低碳含量的测定 第2部分：感应炉燃烧后红外吸收法（预热）（ISO 15349-2:1999）

Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:1999)