材料抵抗弯曲变形能力的量化指标，如要求试件平均抗弯强度不低于5.0MPa，单个单元不低于4.5MPa。
| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| AASHTO T 97-2018 试验标准 |
Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
|
2018 美国公路与运输员工协会 |
| ACI SP-226-2005 试验 |
Autoclaved Aerated Concrete - Properties and Structural Design
蒸压加气混凝土 |
2005-04-01 美国混凝土学会 |
| AS/NZS 4266.5:2004(R2006) 试验 |
Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength
重组木质板材 |
2006 澳大利亚/新西兰标准 |
| ASTM C1211-02 Test Method |
Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures
|
2002 美国材料与试验协会 |
| ASTM C1211-02(2008) Test Method |
Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures
先进陶瓷 |
2002 美国材料与试验协会 |
| ASTM C1228-96(2023) 试验 |
Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
玻璃纤维增强混凝土 |
2023-05-01 美国材料与试验协会 |
| ASTM C1525-04(2013) Test Method |
Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
先进陶瓷 热震 |
2004 美国材料与试验协会 |
| ASTM C158-23 试验方法标准 |
Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
玻璃陶瓷 |
2023-11-01 美国材料与试验协会 |
| ASTM C1609/C1609M-24 试验 |
纤维增强混凝土弯曲性能的标准试验方法（使用带有第三点载荷的梁） Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
纤维增强混凝土 |
2024-1-1 美国材料与试验协会 |
| ASTM C1684-18 Test Method |
Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature&x2014;Cylindrical Rod Strength
陶瓷材料 |
2018 美国材料与试验协会 |
| ASTM C1684-18(2023) 试验规范 |
Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength
先进陶瓷 |
2023-01-01 美国材料与试验协会 |
| ASTM C1782/C1782M-17 Specification |
Standard Specification for Utility Segmental Concrete Paving Slabs
|
2017 美国材料与试验协会 |
| ASTM C1782/C1782M-23 试验 |
Standard Specification for Segmental Concrete Paving Slabs
|
2023-06-15 美国材料与试验协会 |
| ASTM C1782/C1782M-25a 规范 |
Standard Specification for Segmental Concrete Paving Slabs
翘曲 |
2025-12-01 美国材料与试验协会 |
| ASTM C198-09 Test Method |
Standard Test Method for Cold Bonding Strength of Refractory Mortar
断裂模量 耐火砂浆 |
2009 美国材料与试验协会 |
| ASTM C198-09(2019) 试验标准 |
Standard Test Method for Cold Bonding Strength of Refractory Mortar
断裂模量 耐火砂浆 |
2019-04-01 美国材料与试验协会 |
| ASTM C221-98(2014) Specification |
Standard Specification for Corrugated Asbestos-Cement Sheets
|
1998 美国材料与试验协会 |
| ASTM C293/C293M-16 Test Method |
Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
|
2016 美国材料与试验协会 |
| ASTM C348-14 Test Method |
Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars
水硬性水泥砂浆 |
2014 美国材料与试验协会 |
| ASTM C410-08 Specification |
Standard Specification for Industrial Floor Brick
|
2008 美国材料与试验协会 |
| ASTM C459/C459M-97(2011)e1 Test Method |
Standard Test Methods for Asbestos-Cement Flat Products
挠度 |
1997 美国材料与试验协会 |
| ASTM C473-24 试验 |
Standard Test Methods for Physical Testing of Gypsum Panel Products
石膏板产品 硬度测试 |
2024-12-01 美国材料与试验协会 |
| ASTM C500/C500M-07(2011)e1 Test Method |
Standard Test Methods for Asbestos-Cement Pipe
|
2007 美国材料与试验协会 |
| ASTM C551/C551M-07(2011)e1 Specification |
Standard Specification for Asbestos-Cement Fiberboard Insulating Panels
|
2007 美国材料与试验协会 |
| ASTM C580-02(2012) Test Method |
耐化学侵蚀的灰浆、簿浆及整体面层和聚脂混凝土挠性强度和弹性模数的标准试验方法 Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
|
2002 美国材料与试验协会 |
| ASTM C583-05(2009) Test Method |
Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures
|
2005 美国材料与试验协会 |
| ASTM C67-07a Test Method |
Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
砖 |
2007 美国材料与试验协会 |
| ASTM C689-09(2014) Test Method |
Standard Test Method for Modulus of Rupture of Unfired Clays
|
2009 美国材料与试验协会 |
| ASTM C746-90(2014) Specification |
Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading
|
1990 美国材料与试验协会 |
| ASTM C880/C880M-15 Test Method |
Standard Test Method for Flexural Strength of Dimension Stone
石材 |
2015 美国材料与试验协会 |
| ASTM C880/C880M-18 试验标准 |
Standard Test Method for Flexural Strength of Dimension Stone
石材 |
2018 美国材料与试验协会 |
| ASTM C880/C880M-24 试验方法 |
Standard Test Method for Flexural Strength of Dimension Stone
|
2024-04-01 美国材料与试验协会 |
| ASTM C93-84 试验 |
Standard Test Methods for COLD CRUSHING STRENGTH AND MODULUS OF RUPTURE OF INSULATING FIREBRICK
冷压强度 |
1984-11 美国材料与试验协会 |
| ASTM D1635-00(2006) Test Method |
Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
|
2000 美国材料与试验协会 |
| ASTM D1635/D1635M-12 Test Method |
Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
|
2012 美国材料与试验协会 |
| ASTM D7972-14 Test Method |
在室温条件下采用三点负荷法的炭及石墨加工制品挠曲强度的标准试验方法 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
石墨 |
2014 美国材料与试验协会 |
| ASTM D8058-25 试验标准 |
使用三点弯曲试验确定土工合成水泥基复合垫（GCCM）弯曲强度的标准试验方法 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
三点弯曲试验 |
2025-12-01 美国材料与试验协会 |
| ASTM E855-21 试验方法 |
Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
屈服强度 |
2021-02-01 美国材料与试验协会 |
| BS 1881-118:1983(1998) 试验 |
Testing concrete — Part 118 : Method for determination of flexural strength
加载装置 测试试件 |
1998 英国标准学会 |
| BS 6319-8:1984(1999) 试验 |
Testing of resin compositions for use in construction — Part 8 : Method for the assessment of resistance to liquids
|
1999 英国标准学会 |
| BS EN 1170-4:1998 试验 |
预制混凝土制品.玻璃纤维增强水泥的测试方法.测定抗弯强度.简易弯曲试验法 Precast concrete products - Test method for glass-fibre reinforced cement - Measuring bending strength - 'Simplified bending test' method
玻璃纤维增强水泥 |
1998-03-15 英国标准学会 |
| BS EN 1170-8:2008 试验 |
Test method for glassfibre reinforced cement Part 8: Cyclic weathering type test
玻璃纤维增强水泥 |
2008-12-31 英国标准学会 |
| BS EN 12326-2:2011 试验 |
Slate and stone for discontinuous roofing and external cladding. Methods of test for slate and carbonate slate
板岩 |
2011-07-31 英国标准学会 |
| BS EN 12808-3:2008 试验 |
Grouts for tiles - Determination of flexural and compressive strength
|
2008-11-30 英国标准学会 |
| BS EN 13161:2008 试验 |
Natural stone test methods - Determination of flexural strength under constant moment
天然石材 |
2008-08-29 英国标准学会 |
| BS EN 1351:1997 试验 |
Determination of flexural strength of autoclaved aerated concrete
蒸压加气混凝土 |
1997-09-15 英国标准学会 |
| BS EN 13813:2002 规范 |
Screed material and floor screeds - Screed material - Properties and requirements
|
2002-11-11 英国标准学会 |
| BS EN 13892-2:2002 试验 |
Methods of test for screed materials - Determination of flexural and compressive strength
|
2002-11-28 英国标准学会 |
| BS EN 14066:2013 试验标准 |
Natural stone test methods. Determination of resistance to ageing by thermal shock
天然石材 热冲击 |
2013-04-30 英国标准学会 |
| BS EN 14488-3:2006 试验 |
测试喷射的混凝土.纤维钢筋梁样品的挠曲强度(首峰、终峰和残余量) Testing sprayed concrete - Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
喷射混凝土 |
2006-05-31 英国标准学会 |
| BS EN 14617-2:2016 试验标准 |
Agglomerated stone. Test methods. Determination of flexural strength (bending)
|
2016-06-30 英国标准学会 |
| BS EN 14617-5:2012 试验 |
Agglomerated stone. Test methods. Determination of freeze and thaw resistance
冻融循环 |
2012-05-31 英国标准学会 |
| BS EN 1521:1997 试验 |
Determination of flexural strength of lightweight aggregate concrete with open structure
轻骨料混凝土 |
1997-08-15 英国标准学会 |
| BS EN 15283-2:2008+A1:2009 规范 |
Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Gypsum fibre boards
抗剪强度 |
2008-04-30 英国标准学会 |
| BS EN 520:2004+A1:2009 规范 |
Gypsum plasterboards - Definitions, requirements and test methods
石膏板 |
2004-11-22 英国标准学会 |
| BS EN 520:2004+A1:2009(2010) 试验/规范标准 |
Gypsum plasterboards — Definitions, requirements and test methods
防火测试 |
2010-01-01 英国标准学会 |
| BS EN 538:1994(1999) 试验 |
Clay roofing tiles for discontinuous laying — Flexural strength test
测试载荷 粘土屋面瓦 |
1999-01-01 英国标准学会 |
| BS EN 634-2:2007 规范 |
水泥胶粘刨花板.规范.干燥、潮湿和室外条件用普通硅酸盐水泥(OPC)胶粘刨花板的要求 Cement-bonded particleboards - Specifications - Requirements for OPC bonded particleboards for use in dry, humid and external conditions
尺寸变化 |
2007-03-30 英国标准学会 |
| BS EN 846-9:2016 试验 |
Methods of test for ancillary components for masonry. Determination of flexural resistance and shear resistance of lintels
|
2016-03-31 英国标准学会 |
| BS EN 993-7:2000 试验 |
Methods of test for dense shaped refractory products. Determination of modulus of rupture at elevated temperatures
加载装置 试验温度 |
2000-09-15 英国标准学会 |
| BS EN 993-7:2000(2010)*BS 1902-4.5:2000 试验 |
方法试验测试密集型成型耐火制品 第7部分：高温抗折强度的测定 Methods of test and testing of compact shaped refractory products - Part 7: Determination of flexural strength at elevated temperatures
加载装置 试验温度 |
2000-01-01 英国标准学会 |
| BS ISO 2493-2:2020 试验标准 |
Paper and board. Determination of resistance to bending. Taber-type tester
弯曲力矩 弯曲角度 |
2020-11-12 英国标准学会 |
| CNS 13178-1993 试验 |
Method of Test for Flexural Strength of Polyester Resin Concrete
聚酯树脂混凝土 |
1993-04-21 台湾地方标准 |
| CNS 13210-1993 试验 |
Method of Test for Reinforced Concrete Gutters for Roadside
|
1993-06-25 台湾地方标准 |
| CNS 9909-2006 规范 |
Medium density fiberboards
中密度纤维板 甲醛释放量 |
2006-08-24 台湾地方标准 |
| CSA B127.1-1999(R2014) 规范标准 |
Non-asbestos cement drainage, wastewater and ventilation pipes and their accessories
|
2014 加拿大标准协会 |
| DIN 18162:2000 规范 |
Lightweight concrete wallboards - unreinforced
|
2000-10 德国标准化学会 |
| DIN 18516-4:1990 规范 |
Back-ventilated, non-loadbearing, external enclosures of buildings, made from tempered safety glass panels; requirements and testing
|
1990-02 德国标准化学会 |
| DIN 54608:2022 试验 |
Board - Buckling resistance of corrugated board
瓦楞纸板 |
2022-05-01 德国标准化学会 |
| DIN EN 1015-11 E:2018-01 试验标准 |
圬工用灰浆的试验方法 第11部分：硬化灰浆弯曲强度和耐压强度的测定（草案） Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
|
2018-01 德国标准化学会 |
| DIN EN 1052-2 E:2015-08 试验标准 |
Methods of test for masonry - Part 2: Determination of flexural strength
砌体 |
2015-08 德国标准化学会 |
| DIN EN 12372 E:2021-02 试验标准 |
Natural stone test methods - Determination of flexural strength under concentrated load
天然石材 |
2021-02 德国标准化学会 |
| DIN EN 12808-3:2009 试验 |
Grouts for tiles - Determination of flexural and compressive strength; English version of DIN EN 12808-3:2009-01
|
2009-01 德国标准化学会 |
| DIN EN 13161:2002 试验 |
Natural stone test methods - Determination of flexural strength under constant moment
天然石材 |
2002 德国标准化学会 |
| DIN EN 13161:2008-08 试验 |
Natural stone test methods - Determination of flexural strength under constant moment; German version EN 13161:2008
天然石材 |
2008-08 德国标准化学会 |
| DIN EN 1343 E:2009-04 试验 |
Kerbs of natural stone for external paving - Requirements and test methods
路缘石 |
2009-04 德国标准化学会 |
| DIN EN 13851 E:2000-06 试验 |
Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of flexural and compressive strength
|
2000-06 德国标准化学会 |
| DIN EN 14066:2013 试验标准 |
天然石料的试验方法. 通过热冲击对抗老化性的测定; 德文版本EN 14066-2013 Natural stone test methods - Determination of resistance to ageing by thermal shock; German version EN 14066:2013
天然石材 热冲击 |
2013-06 德国标准化学会 |
| DIN EN 14209:2006 规范 |
预成型灰泥板檐口.定义、要求和试验办法.德文版本EN 14209-2005 Preformed plasterboard cornices - Definitions, requirements and test methods; English version of DIN EN 14209:2006-02
|
2006-02 德国标准化学会 |
| DIN EN 14251 E:2001-11 试验 |
Structural round timber - Test methods
|
2001-11 德国标准化学会 |
| DIN EN 14251:2004 试验 |
Structural round timber - Test methods; German version EN 14251:2003
圆木 |
2004-04 德国标准化学会 |
| DIN EN 14509-5 E:2021-07 规范标准 |
工厂制造的双层金属面保温夹芯板 第5部分：设计方法 作用与跨度组合的确定标准（草案） Factory-made double skin metal faced insulating sandwich panels - Part 5: Design methods - Determination criteria for combining actions and spans
夹芯板 |
2021-07 德国标准化学会 |
| DIN EN 14617-2 E:2015-11 试验标准 |
Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
人造石 |
2015-11 德国标准化学会 |
| DIN EN 14617-2:2016-09 试验 |
Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending); German version EN 14617-2:2016
人造石 |
2016-09 德国标准化学会 |
| DIN EN 15283-2:2009 规范 |
带纤维增强的石膏板.定义、要求和试验方法.第2部分:石膏纤维板.德文版本EN 15283-2-2008+A1-2009 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards; German version EN 15283-2:2008+A1:2009
抗剪强度 |
2009-12 德国标准化学会 |
| DIN EN 15283-2:2009-12 规范 |
Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards; German version EN 15283-2:2008+A1:2009
|
2009-12 德国标准化学会 |
| DIN EN 520:2009-12 规范 |
Gypsum plasterboards - Definitions, requirements and test methods; German version EN 520:2004+A1:2009
石膏板 防火性能 |
2009-12 德国标准化学会 |
| DIN EN 572-1-2004-2 术语 |
玻璃在建筑中的基本硅酸钠钙玻璃产品 第1部分：定义及一般物理和机械性能 Glass in buildings - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties
建筑玻璃 钠钙硅酸盐玻璃 |
2004-2 德国标准化学会 |
| DIN EN 62341-5-2:2015-01 试验 |
有机发光二极管(OLED)显示器 第5-2部分：机械耐久性测试方法 Organic light emitting diode (OLED) displays - Part 5-2: Mechanical endurance testing methods (IEC 62341-5-2:2013); German version EN 62341-5-2:2013
有机发光二极管显示 |
2015-01 德国标准化学会 |
| DIN EN 845-2:2016 规范 |
砌体用附属部件规格.第2部分:过梁.德文版本EN 845-2-2013+A1-2016 Specification for ancillary components for masonry - Part 2: Lintels; German version EN 845-2:2013+A1:2016
过梁 |
2016-12 德国标准化学会 |
| DIN EN 846-9 E:2015-08 试验标准 |
砖石工程辅助元部件试验方法 第9部分：门窗过梁抗弯曲性和抗剪切性测定（草案） Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels
抗剪强度 过梁 |
2015-08 德国标准化学会 |
| DIN EN 993-6:1995 试验 |
致密成型耐火制品的试验方法.第6部分:室温下断裂模数的测定; 德文版本 EN 993-6:1995 Methods of test for dense shaped refractory products - Part 6: Determination of moduls of rupture at ambient temperature; German version EN 993-6:1995
三点弯曲 致密成型耐火制品 |
1995-04 德国标准化学会 |
| DIN EN 993-7:1998 试验 |
Methods of test for dense shaped refractory products - Part 7: Determination of modulus of rupture at elevated temperatures; German version EN 993-7:1998
致密成型耐火制品 试验温度 |
1998-12 德国标准化学会 |
| DIN EN 993-7:1998-12 试验 |
Methods of test for dense shaped refractory products - Part 7: Determination of modulus of rupture at elevated temperatures; German version EN 993-7:1998
致密成型耐火制品 试验温度 |
1998-12 德国标准化学会 |
| DIN EN ISO 3325:2002 试验 |
包括硬质合金的烧结金属材料.横向断裂强度的测定 (ISO 3325:1996 + AMD 1:2001) (包括修改件A1:2002); 德文版本 EN ISO 3325:1999 + A1:2002 Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength (ISO 3325:1996 + AMD 1:2001) (includes Amendment A1:2002); German version EN ISO 3325:1999 + A1:2002
烧结金属材料 |
2002-06 德国标准化学会 |
| GB/T 12798-2012 试验 |
Axial lead cores made of magnetic oxides or iron powder
|
2012-11-05 国家市场监督管理总局 |
| GB/T 13465.2-2014 试验 |
Test method of impermeable graphite materials.Part 2:Flexure strength
|
2014-09-03 国家市场监督管理总局 |
| GB/T 14235.2-2018 试验 |
Low temperature pattern wax materials for investment casting—Part 2: Testing methods for usability properties
表面硬度 |
2018-12-28 国家市场监督管理总局 |
| GB/T 31967.2-2015 试验 |
稀土永磁材料物理性能测试方法 第2部分:抗弯强度和断裂韧度的测定 Test method for physical property of rare earth permanent magnetic materials.Part 2:Determination of bending strength and fracture toughness
断裂韧度 |
2015-09-11 国家市场监督管理总局 |
| GB/T 4740-2024 |
Test methods for strength of ceramic materials
|
2024-11-28 国家市场监督管理总局 |
| GOST 31040-2002 试验 |
Refractory products. Determination of modulus of rupture at elevated temperatures
耐火制品 试验温度 |
2002 俄罗斯标准局 |
| GOST 32281.2-2013 试验 |
玻璃和玻璃制品. 抗弯强度的测定. 有大试验表面的平试样的同轴双环试验 Glass and glass products. Determination of the bending strength. Coaxial double ring test on flat specimens with large test surface areas
弯曲应力 有效弯曲应力 |
2013 俄罗斯标准局 |
| GOST 32281.3-2013 试验 |
玻璃和玻璃制品. 抗弯强度的测定. 两点支撑样品试验 (四点弯曲) Glass and glass products. Determination of the bending strength. Test with specimen supported at two points (four points bending)
有效弯曲应力 |
2013 俄罗斯标准局 |
| GOST ISO 2493-1996 试验 |
Paper and board. Method for determination of resistance to bending
弯曲角度 弯曲长度 |
1996 俄罗斯标准局 |
| GOST R 58527-2019 试验方法 |
Wall materials. Methods for determination of ultimate compressive and bending strength
|
2019 俄罗斯标准局 |
| GOST R 58527-2023 试验标准 |
Wall materials. Methods for determination of ultimate compressive and bending strength
|
2023-11-14 俄罗斯标准局 |
| GOST R 70228-2022 试验 |
Oriented strand wood constriction boards. Methods for determining of strength and elastic characteristics
定向刨花板 |
2022-07-29 俄罗斯标准局 |
| GOST R ISO 12986-2-2015 试验 |
铝生产用碳质材料. 预焙阳极和阴极碳块. 第2部分. 利用四点法测定弯曲强度 Carbonaceous materials used in the production of aluminium. Prebaked anodes and cathode blocks. Part 2. Determination of flexural strength by the four - point method
焙烧阳极 阴极块 |
2015 俄罗斯标准局 |
| HB 5350.3-2004 试验 |
Test method for properties of investment casting pattern materials-Part 3:Determination of bending strength
|
2004-09-01 行业标准-航空 |
| HB 5352.1-2004 试验 |
Test method for properties of investment casting shell-Part 1:Determination of bending strength
|
2004-09-01 行业标准-航空 |
| HB 5353.3-2004 试验 |
Test method for properties of investment casting ceramic core-Part 3:Determination of bending strength
试验载荷 |
2004-09-01 行业标准-航空 |
| HG/T 3194-2009 规范 |
Graphite wye
不透性石墨 |
2009-02-05 行业标准-化工 |
| HG/T 3196-2009 规范 |
Graphite external joint
不透性石墨 |
2009-02-05 行业标准-化工 |
| HG/T 3198-2009 规范 |
Graphite pipe end
不透性石墨 |
2009-02-05 行业标准-化工 |
| HG/T 3202-2009 规范 |
Annular tube for thermometer of graphite
不透性石墨 |
2009-02-05 行业标准-化工 |
| IRAM 11827:1996 试验 |
Ceramic tiles for floor and wall coverings. Determination of flexural strength.
三点弯曲试验 陶瓷制品 |
1996-06-07 阿根廷标准化研究所 |
| IRAM 12602:1986 试验 |
Refractory materials. Insulating refractory bricks. Methods of testing for compression and flexure at ambient temperature.
|
1986-10-03 阿根廷标准化研究所 |
| IRAM 165306:2001 试验 |
Raw materials for ceramics. Determination of flexural strength.
原材料 |
2001-07-26 阿根廷标准化研究所 |
| IRAM 45073:2005 试验 |
Mortars for joints (grouts). Determination of flexural and compression strength.
|
2005-11-15 阿根廷标准化研究所 |
| IRAM 9706:2001 试验 |
Wood-based panels. Determination of modulus of elasticity in bending and of bending strength.
模量 |
2001-04-10 阿根廷标准化研究所 |
| ISO 10545-4:2019 试验 |
Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength
瓷砖 |
2019-02-18 国际标准化组织 |
| ISO 12986-1:2014 试验 |
铝生产用碳素材料 预焙阳极和阴极碳块 第1部分:用三点法测定抗弯强度/剪切强度 Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Part 1: Determination of bending/shear strength by the three-point method
|
2014-06-01 国际标准化组织 |
| ISO 12986-2:2009 试验 |
铝生产用碳素材料.预焙阳极和阴极碳块.第2部分:用四点法测定抗弯强度 Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocksPart 2:Determination of flexural strength by the four-point method
|
2012-10-04 国际标准化组织 |
| ISO 17565:2003 试验 |
细陶瓷(高级陶瓷、高级工业陶瓷).高温下块体陶瓷弯曲强度的试验方法 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at elevated temperature
三点弯曲 四点弯曲 |
2003-12 国际标准化组织 |
| ISO 8336:2009 规范 |
Fibre-cement flat sheets - Product specification and test methods
纤维水泥平板 |
2009-05 国际标准化组织 |
| JB/T 10320-2002 规范 |
Household and similar silicon nitride ceramic heating elements used for electric heating appliances
工作寿命 |
2002-07-16 行业标准-机械 |
| JC/T 2224-2014 规范标准 |
Wood-plastic composite cladding panels for exterior decorate
|
2014-05-06 行业标准-建材 |
| JIS A 1106:2006 试验标准 |
Method of test for flexural strength of concrete
硬化混凝土 |
2006-06-30 日本工业标准调查会 |
| LST EN 13161:2008 试验 |
Natural stone test methods - Determination of flexural strength under constant moment
天然石材 |
2008-09-15 |
| LST EN 1340:2003 试验 |
Concrete kerb units - Requirements and test methods
混凝土路缘石 |
2003-11-01 |
| LST EN 14209:2017 规范 |
Preformed plasterboard cornices - Definitions, requirements and test methods
耐火性 |
2017-10-31 立陶宛标准局 |
| LST EN 14617-2:2016 试验 |
Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
断裂载荷 |
2016-11-10 立陶宛标准局 |
| MS EN 12390-5:2012 试验 |
Testing hardened concrete - Part 5: Flexural strength of test specimens (Second revision)
硬化混凝土 |
2019-04-06 马来西亚标准 |
| NF EN 12390-5:2019 试验标准 |
Testing hardened concrete — Part 5: Flexural strength of test specimens
加载装置 硬化混凝土 |
2019-06-01 法国标准化协会 |
| NF P61-503:1991 试验 |
Ceramic tiles. Determination of modulus of rupture.
三点弯曲试验 |
1991-11-01 法国标准化协会 |
| QB/T 2440.1-2007 规范 |
Pliers-Snipe nose pliers
尖嘴钳 |
2007-05-29 行业标准-轻工 |
| QB/T 2440.2-2007 规范标准 |
Pliers- Flat nose pliers
|
2007-05-29 行业标准-轻工 |
| QB/T 2441.1-2007 规范标准 |
Nippers- Diagonal cutting nippers
剪切性能 |
2007-05-29 行业标准-轻工 |
| QB/T 2442.1-2007 规范 |
Pliers and nippers- Engineer's pliers
剪切性能 |
2007-05-29 行业标准-轻工 |
| QB/T 2442.2-2007 规范 |
Pliers and nippers-Lineman's pliers
剪切性能 |
2007-05-29 行业标准-轻工 |
| QB/T 2442.4-2007 规范 |
Pliers and nippers- Slip joint pliers
剪切性能 |
2007-05-29 行业标准-轻工 |
| QB/T 4055.2-2011 规范 |
Cermet casings of watches.Part 2: Carbide cermet casings
|
2011-05-18 行业标准-轻工 |
| SS-EN 1015-11:2000 试验 |
砌筑砂浆试验方法 第11部分：硬化砂浆抗弯强度和抗压强度的测定 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
硬化砂浆 |
2000 瑞典标准研究所 |
| SS-EN 1052-2:2000 试验 |
Methods of test for masonry - Part 2: Determination of flexural strength
砌体 |
2000 瑞典标准研究所 |
| SS-EN 1052-2:2016 试验标准 |
Methods of test for masonry - Part 2: Determination of flexural strength
砌体 |
2016 瑞典标准研究所 |
| SS-EN 12390-5:2019 试验标准 |
Testing hardened concrete - Part 5: Flexural strength of test specimens
硬化混凝土 |
2019 瑞典标准研究所 |
| SS-EN 13161:2008 试验 |
Natural stone test methods - Determination of flexural strength under constant moment
天然石材 |
2008 瑞典标准研究所 |
| SS-EN 14209:2005 规范 |
Preformed plasterboard cornices - Definitions, requirements and test methods
|
2005 瑞典标准研究所 |
| SS-EN 14251:2003 试验 |
Structural round timber - Test methods
|
2003-12-12 瑞典标准研究所 |
| SS-EN 14566:2008+A1:2009 规范 |
Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods
机械紧固件 石膏板 |
2009 瑞典标准研究所 |
| SS-EN 14617-5:2005 试验 |
Agglomerated stone - Test methods - Part 5: Determination of freeze and thaw resistance
冻融循环 |
2005 瑞典标准研究所 |
| SS-EN 14617-5:2012 试验标准 |
Agglomerated stone - Test methods - Part 5: Determination of freeze and thaw resistance
人造石 冻融循环 |
2012 瑞典标准研究所 |
| SS-EN 1533:2010 试验标准 |
Wood flooring - Determination of bending strength under static load - Test methods
木地板 测试组件 |
2010 瑞典标准研究所 |
| SS-EN 846-9:2016 试验标准 |
砌体辅助构件试验方法 第9部分：过梁弯曲抗力和剪切抗力的确定 Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels
过梁 |
2016 瑞典标准研究所 |
| SS-ISO 2493-1:2010 试验标准 |
纸和纸板 弯曲阻力的测定 第1部分：恒定挠度率（ISO 2493-1:2010 等同） Paper and board - Determination of bending resistance - Part 1: Constant rate of deflection (ISO 2493-1:2010, IDT)
弯曲长度 纸和纸板 |
2010 瑞典标准研究所 |
| T/NAHIEM 57-2022 规范 |
Prefilter
|
2022-09-30 中国团体标准 |
| UNE-EN 12390-5:2020 试验 |
Testing hardened concrete - Part 5: Flexural strength of test specimens
|
2020-02-12 西班牙标准化协会 |
| UNE-EN 12789:2002 试验 |
先进技术陶瓷 陶瓷复合材料在大气压力下高温下的机械性能 弯曲强度的测定 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength (Endorsed by AENOR in July of 2003.)
测试温度 |
2003-07-01 西班牙标准化协会 |
| UNE-EN 1288-1:2000 试验 |
Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass.
有效弯曲应力 |
2000-11-29 西班牙标准化协会 |
| UNE-EN 1351:1997 试验 |
Determination of flexural strength of autoclaved aerated concrete
蒸压加气混凝土 预制构件 |
1997-06-20 西班牙标准化协会 |
| UNE-EN 14617-2:2016 试验标准 |
Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
断裂载荷 |
2016-09-28 西班牙标准化协会 |
| UNE-EN 846-9:2019 试验标准 |
Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels
抗剪强度 |
2019-02-13 西班牙标准化协会 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证：京ICP证110310号
页面更新时间: 2026-05-31 15:20