美利体育登录入口官网

圆柱形弯曲薄壁拖车罐和ASME XII部分

BUCKLING OF CYLINDRICAL, THIN WALL,TRAILER TRUCK TANKS AND ASME SECTION XII

丙烯塑料在与液态或半液态化合物接触中产生的应力的标准试验方法

Standard Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds

与液体或半液体化合物接触的丙烯酸塑料应力开裂的标准试验方法

Standard Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds

建筑玻璃.玻璃弯曲强度的测定.试验玻璃的基本原则

Glass in building - Determination of the bending strength of glass - Fundamentals of testing glass

建筑玻璃.玻璃弯曲强度的测定.有大试验表面的平试样的同轴双环试验

Glass in building - Determination of the bending strength of glass - Coaxial double ring test on flat specimens with large test surface areas

建筑玻璃.玻璃弯曲强度的测定.(四点弯曲)两点支撑的试样的试验

Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)

塑料 载荷下挠曲温度的测定 一般试验方法

Plastics. Determination of temperature of deflection under load. General test method

塑料试验.扁平试样弯曲应变区域的疲劳试验

Flexural fatique testing of plastics using flat specimens

建筑物用隔热产品 弯曲性能的测定（草案）

Thermal insulating products for building applications - Determination of bending behaviour

建筑物用隔热产品 弯曲性能的测定

Thermal insulating products for building applications - Determination of bending behaviour

建筑物玻璃.玻璃弯曲强度测定.第1部分:玻璃试验基本原则

Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass; German version EN 1288-1:2000

塑料 载荷下挠曲温度的测定 第1部分：通用试验方法（草案）

Determination of deflection temperature of plastics under load Part 1: General test method (draft)

塑料-热变形温度的测定- 第1部分：通用试验方法(ISO 75-1:2004)；德文版 EN ISO 75-1:2004

Plastics – Determination of heat deflection temperature – Part 1: General test method (ISO 75-1:2004); German version EN ISO 75-1:2004

塑料.载荷下挠曲温度的测定.第1部分:通用试验方法(ISO 75-1-2013).德文版本EN ISO 75-1-2013

Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013); German version EN ISO 75-1:2013

塑料 热变形温度的测定 第2部分：塑料和硬橡胶（ISO 75-2:2004）；德文版 EN ISO 75-2:2004

Plastics – Determination of heat deflection temperature – Part 2: Plastics and hard rubber (ISO 75-2:2004); German version EN ISO 75-2:2004

塑料 载荷下挠曲温度的测定 第2部分：塑料和硬橡胶

Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite

塑料.载荷下挠曲温度的测定.第2部分:塑料和硬橡胶(ISO 75-2-2013).德文版本EN ISO 75-2-2013

Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013); German version EN ISO 75-2:2013

塑料 负载变形温度的测定 第2部分：塑料和硬橡胶

Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013); German version EN ISO 75-2:2013

塑料.蠕变性能的测定.第2部分:三点负载时弯曲蠕变

Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003); German version EN ISO 899-2:2003

建筑玻璃.玻璃弯曲强度的测定.第3部分:两点支撑样品试验(四点弯曲)

Glass in Building - Determination of the Bending Strength of Glass - Part 3: Test with Specimen Supported at Two Points (Four Point Bending)

塑料 负荷变形温度的测定 第1部分：通用试验方法

Plastics - Determination of deflection temperature under load - Part 1: General test method

塑料 负荷变形温度的测定 第2部分：塑料和硬橡胶

Plastics—Determination of temperature of deflection under load—Part 2:Plastics and ebonite

铜及铜合金弯曲应力松弛试验方法

Test method of the bending stress relaxation for copper and copper alloy

纤维金属层板弯曲性能试验方法

Test method for flexural properties of fibre metal laminates

建筑用玻璃. 玻璃抗弯强度的测定. 第1部分. 试验玻璃的基本原则

Glass in building. Determination of the bending strength of glass. Part 1. Fundamentals of testing glass

玻璃和玻璃制品. 抗弯强度的测定. 有大试验表面的平试样的同轴双环试验

Glass and glass products. Determination of the bending strength. Coaxial double ring test on flat specimens with large test surface areas

计算和强度测试 声弹法评估干线管道线性部分的弯曲应力 一般要求

Calculation and strength testing. Evaluation of flexural stresses in linear part of trunk pipelines by acoustoelastic methods. General requirements

硬质橡胶.弯曲强度的测定

Ebonite.Determination of cross breaking strength

建筑物应用隔热产品.弯曲行为测定

Thermal insulating products for building applications - Determination of bending behaviour

滑动轴承.轴承疲劳强度.第3部分:多层金属滑动轴承材料的轴瓦试验

Plain bearings - Bearing fatigue - Part 4: Test on half-bearings of a metallic multilayer bearing material

航空航天系列.液压管路安装接头及管接头.平面弯曲试验

Aerospace series - Hydraulic tubing joints and fittings - Planar flexure test

板簧 第2部分：设计方法

Leaf springs -- Part 2: Design method

碳纤维增强塑料弯曲性能的测试方法

Testing methods for flexural properties of carbon fiber reinforced plastics

负荷下的刚性塑料弯曲温度测定方法

Testing Method for Deflection Temperature of Rigid Plastics under Load

建筑玻璃 玻璃抗弯强度测定 第1部分：玻璃测试的基本原理

Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass

建筑玻璃 确定玻璃的弯曲强度 第二部分 大测试面积板状试样的双环测试

Glass in building - Determination of bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas

塑料 弯曲性能的测定 (ISO 178:2019)

Plastics - Determination of flexural properties (ISO 178:2019)

建筑玻璃 玻璃弯曲强度的测定 第1部分：玻璃测试的基本原理

Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass

建筑用玻璃 玻璃的弯曲强度试验 第3部分：两点支撑(四点弯曲)试样测试

Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)

塑料 弯曲性能的测定（ISO 178:1993）

Plastics - Determination of flexural properties (ISO 178:1993)

塑料 载荷下变形温度的测定 第2部分：塑料、硬橡胶和长纤维增强复合材料（ISO 75-2:2004）

Plastics - Determination of temperature of deflection under load - Part 2: Plastics, ebonite and long-fibre-reinforced composites (ISO 75-2:2004)

热塑性塑料 在负荷下挠曲温度的测定 第2部分：塑料和象牙黑（ISO 75-2:2013）

Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)

建筑玻璃 玻璃弯曲强度的测定 第2部分：具有大测试表面积的平面样品的同轴双环测试

Glass in building - Determination of bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas.

建筑玻璃 玻璃弯曲强度的测定 第3部分：两点支撑试样试验（四点弯曲）

Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)

建筑玻璃 玻璃抗弯强度的测定 第5部分：具有小测试表面积的平面样品的同轴双环测试

Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas.

塑料 负载变形温度的测定 第1部分：通用测试方法

Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2020)

塑料 负载变形温度的测定 第2部分：塑料和硬橡胶（ISO 75-2:2013）

Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)