美利体育登录入口官网

塑料的标准试验方法:动态机械性能:弯曲(三点弯曲)

Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)

塑料的标准试验方法: 动态机械性能: 承弯 (三点弯曲)

Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)

采用热机械分析对三点弯曲上变形温度的的标准试验

Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis

采用三点弯曲和控制装载率进行热机械分析弹性模量的标准试验方法

Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading

高技术陶瓷.室温下陶瓷成份的机械特性.弯曲强度的测定

Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of flexural strength

高级工业陶瓷.室温下单片陶瓷的机械特性.第1部分:弯曲强度的测定

Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength

高级工业陶瓷.室温下单片陶瓷的机械特征.第3部分:通过固定应力率挠曲强度测定快速裂痕增长参数

Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 3: Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests

纸板-瓦楞纸板的抗屈曲性能

Board - Buckling resistance of corrugated board

先进技术陶瓷 陶瓷复合材料在惰性气氛下高温下的机械性能 弯曲强度的测定

Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength; German version EN 12788:2005

高级工业陶瓷.大气压力下陶瓷复合物高温机械特性.挠曲强度测定

Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength; German version EN 12789:2002

环境温度下的机械特征

Mechanical properties at room temperature

先进技术陶瓷.单片陶瓷在室温下的机械性能.第1部分：弯曲强度的测定

Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength; German version EN 843-1:2006

致密成型耐火制品的试验方法 第6部分：室温下断裂模数的测定（草案）

Methods of test for dense shaped refractory products - Part 6: Determination of moduls of rupture at ambient temperature

致密成型耐火制品的试验方法.第6部分:室温下断裂模数的测定; 德文版本 EN 993-6:1995

Methods of test for dense shaped refractory products - Part 6: Determination of moduls of rupture at ambient temperature; German version EN 993-6:1995

塑料 确定蠕变行为 第2部分：三点弯曲加载下的时间稳定蠕变试验 (ISO 899-2:2003/DAM 1:2012)

Plastics - Determination of creep behaviour - Part 2: Time-dependent creep test under three-point bending loading (ISO 899-2:2003/DAM 1:2012)

高分子复合材料. 弯曲平板样品的试验方法

Polymer composites. Test method for flexural flat samples

光缆 第 1-117 部分：通用规范 - 基本光缆测试程序 机械测试方法 - 弯曲刚度，方法 E17

Optical fibre cables - Part 1-117: Generic specification - Basic optical cable test methods - Mechanical tests - Bending stiffness, Method E17

硬质泡沫塑料.弯曲特性测定.第1部分:基本弯曲试验

Rigid cellular plastics - Determination of flexural properties - Part 1: Basic bending test

细陶瓷(高级陶瓷、高级工业陶瓷).高温下块体陶瓷弯曲强度的试验方法

Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at elevated temperature

致密隔热成型耐火制品——环境温度下断裂模量的测定

Dense and insulating shaped refractory products — Determination of modulus of rupture at ambient temperature

现代技术陶瓷 室温下单体陶瓷的机械性能 第1部分 抗弯强度的测定

Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength

预应力钢筋混凝土构件用钢筋鞘管 试验方法 第2部分：挠性测定（欧洲标准EN 524-2）

Steel strip sheaths for prestressing tendons. Test methods. Part 2 : determination of flexural behaviour.

晶体硅光伏电池弯曲强度测试方法

Test Method for Flexural Strength of Crystalline Silicon Photovoltaic Cells

先进技术陶瓷 单片陶瓷 室温下的机械性能 第1部分:抗弯强度的测定

Advanced technical ceramics - Monolithic ceramics- Mechanical properties at room temperature - Part 1: Determination of flexural strenght

先进陶瓷 室温下整体陶瓷的力学性能 第一部分：弯曲强度的测定

Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength

先进陶瓷材料 单晶陶瓷 室温下的机械性能 第三部分：恒定加荷速率弯曲强度试验中亚临界裂纹扩展参数的确定

Advanced technical ceramics - Monolithic ceramics, mechanical properties at room temperature - Part 3: Determination of subcritical crack growth parameters from constant stressing rate flexural strength test

密度耐火制品试验方法 第6部分：常温抗弯模量的测定

Methods of test for (dense) shaped refractory products - Part 6: Determination of modulus of rupture at ambient temperature

塑料 负载下变形温度的测定 第1部分：通用试验方法（ISO 75-1:2013）

Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013)

塑性材料 受载挠曲温度的测定 第1部分：通用试验方法（ISO 75-1:2020）

Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2020)

刚性泡沫塑料 弯曲性能的测定 第1部分：基本弯曲试验（ISO 1209-1:2007 等同）

Rigid cellular plastics - Determination of flexural properties - Part 1: Basic bending test (ISO 1209-1:2007, IDT)