美利体育登录入口官网

低合金钢在石油和天然气生产中的硫化物应力裂纹：镍作为合金元素的效果再评估

Sulfide stress cracking of low alloy steels in oil and gas production: re-evaluation of the effect of nickel as an alloying element

珠光体铸铁对氢诱发应力开裂的敏感性

Susceptibility of pearlitic cast iron to hydrogen-induced stress cracking

汉福德核废料储备罐建造用碳钢应力腐蚀开裂敏感性评估技术综述

Review of Techniques to Evaluate SCC Susceptibility of Carbon Steels Used in Construction of Hanford Nuclear Reservation Waste Tanks

腐蚀抑制剂的发展以减轻碱性碳酸盐应力腐蚀开裂

Development of Corrosion Inhibitors to Mitigate Stress Corrosion Cracking in Alkaline Carbonates

酸性条件下慢应变速率试验前后超级双相不锈钢管材失效分析 第2部分：局部腐蚀案例研究

Failure Analyses On A Super Duplex Stainless Steel Tube Material Before And After Slow Strain Rate Testing In Sour Conditions – Part 2: A Case Study On Local Corrosion

环境诱导裂纹评价的慢应变速率试验：研究与工程应用

Slow Strain Rate Testing for the Evaluation of Environmentally Induced Cracking: Research and Engineering Applications

金属和合金的腐蚀.应力腐蚀试验.第11部分:金属和合金耐氢脆性和氢辅助破裂性测试用指南

Corrosion of metals and alloys - Stress corrosion cracking - Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking

应力腐蚀裂纹（SCC）行为研究

Study on Stress Corrosion Cracking (SCC) Behavior

A516级70钢在近中性至高pH溶液中的氢诱发裂纹失效行为

Hydrogen Induced Cracking Failure of ASTM A 516 Grade 70 Steel in Near Neutral to High pH Solution

硫化铁膜形成对 API 5L X80 钢在 H2S 溶液中的氢脆影响

Effect of iron sulphide film formation on hydrogen embrittlement of an API 5L X80 steel in H2S solutions

高强度沉淀硬化镍合金的氢脆性

Hydrogen embrittlement of high strength precipitation hardened nickel alloys

在渗滤液环境中对埋地矿棉绝热油乳化管道应力腐蚀开裂的实验室测试研究

Laboratory test study on stress corrosion cracking of buried mineral wool insulation oil emulsion pipeline in leachate environment

裂纹扩展速率测试用于评估汉福德高放射性核废料罐的应力腐蚀开裂敏感性：生命周期测试

Crack Growth Rate Testing to Evaluate SCC Susceptibility of a High Level Nuclear Waste Tank at Hanford: Life Cycle Tests

石油天然气美利体育官网首页网址用高强度镍低合金钢：阴极充电下的 ASTM A508 4N 级

High-strength Nickel Low Alloy Steels for Oil and Gas Equipment: ASTM A508 Grade 4N under cathodic charging

金属和合金的腐蚀 应力腐蚀测试 第1部分：测试程序的一般指南（ISO 7539-1:2012）

Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures (ISO 7539-1:2012)

金属和合金的腐蚀-应力腐蚀试验-第7部分：慢应变率试验（ISO 7539-7:2005）

Corrosion of metals and alloys- Stress corrosion testing-Part 7:Slow strain rate testing (ISO 7539-7:2005)