美利体育登录入口官网

AMPP Paper 16573-2021

AMPP Paper 17747-2022

铁碳酸盐腐蚀保护层性能评估

Evaluation of the performance of iron carbonate corrosion protection layer

传导循环恒电流器极化的标准试验方法

Standard Test Method for Conducting Cyclic Galvanostaircase Polarization

金属实验室浸蚀试验的标准实施规程

Standard Practice for Laboratory Immersion Corrosion Testing of Metals

实施铁, 镍或钴基合金的局部腐蚀敏感性的循环动电势极化测量的标准试验方法

Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys

铁、镍或钴基合金局部腐蚀敏感性的循环电位极化测量的标准试验方法

Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys

局部腐蚀 金属失效原因

Causes of metal failure due to local corrosion

金属和合金的腐蚀.电化学试验方法.恒电势和动电位极化测量的实施指南

Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements

金属和合金的腐蚀 增材制造金属和合金的局部腐蚀和环境辅助裂纹测试要求

Corrosion of metals and alloys. Requirements for localised corrosion and environmentally assisted cracking testing of additively manufactured metals and alloys

水面舰艇壳板修换技术要求

Technical requirements for repairing or renewing hull of surface ships

金属和合金的腐蚀 增材制造金属和合金的局部腐蚀和环境辅助开裂试验要求

Corrosion of metals and alloys – Requirements for localized corrosion and environmentally assisted cracking testing of additively manufactured metals and alloys

腐蚀的金属 在水中内部管路、容器和美利体育官网首页网址中的金属材料腐蚀评估 热镀锌铁材腐蚀可能性评价

Corroded metals Evaluation of metal material corrosion in internal pipes, containers and equipment in water Evaluation of the corrosion potential of hot-dip galvanized iron

金属材料防腐蚀保护 配水和储存系统腐蚀可能性评估指南 第1部分：概述（草案）

Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 1: General

金属和合金的腐蚀用添加剂制造法制造的钛合金的电化学临界局部腐蚀温度（E-CLCT）的测量

Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion temperature (E-CLCT) for Ti alloys fabricated via the additive manufacturing method

金属和合金的腐蚀.腐蚀测量用多电极阵列

Corrosion of metals and alloys — Multielectrode arrays for corrosion measurement

金属和合金的腐蚀.添加制造的金属和合金局部腐蚀和环境辅助开裂试验的要求

Corrosion of metals and alloys — Requirements for localised corrosion and environmentally assisted cracking testing of additively manufactured metals and alloys

通过新的化学处理和基于性能的处理优化和控制最大限度地减少局部腐蚀

MINIMIZING LOCALIZED CORROSION VIA NEW CHEMICAL TREATMENTS AND PERFORMANCE BASED TREATMENT OPTIMIZATION AND CONTROL

CO2-H2S环境及有机酸中CRAs的腐蚀行为研究

Study on the Corrosion Behavior of CRAs in CO2-H2S Environment and Organic Acids

局部腐蚀机理在H2S/CO2环境中的研究

Study on localized corrosion mechanism in H2S/CO2 environment

H₂S / CO₂环境下的局部腐蚀

Localized corrosion in H2S/CO2 environments

Cl 和乙酸对湿气中局部二氧化碳腐蚀的影响

Effects of Cl and acetic acid on localized carbon dioxide corrosion in wet atmosphere

氯化物对二氧化碳水环境中国碳钢局部腐蚀启动的影响

Effect of Chloride on the Initiation of Localized Corrosion of Chinese Carbon Steel in CO2 Water Environment

应用电化学石英晶体微平衡（EQCM）研究二氧化碳腐蚀

Study of Carbon Dioxide Corrosion Using Electrochemical Quartz Crystal Microbalance (EQCM)

局部 CO2 腐蚀的随机预测模型

A Stochastic Prediction Model of Localized CO2 Corrosion

氢硫化物环境中耐蚀合金局部腐蚀机理模型

Localized Corrosion Mechanism Model of Corrosion Resistant Alloys in Hydrosulfide Environment

CO₂/H₂S 腐蚀研究在过饱和结垢条件下

CO2/H2S corrosion study under supersaturated fouling conditions

新“绿色”防腐剂的选择与实施

Selection and Implementation of New "Green" Preservatives

腐蚀控制

Corrosion Control

金属局部腐蚀过程中局部化学变化在再钝化中的作用

The role of local chemical changes in repassivation during localized corrosion of metals

腐蚀接受测试及其适用性

Corrosion acceptance testing and its applicability

局部二氧化碳腐蚀对低碳钢的电化学研究

Electrochemical Study of Localized Carbon Dioxide Corrosion on Mild Steel

铁含量对含氯离子环境中Ni-Cr-Mo合金堆焊层局部腐蚀耐受性的影响

Effect of Iron Content on Localized Corrosion Resistance of Ni-Cr-Mo Alloy Surfacing Layer in Chloride Ion Environment

管线顶部腐蚀局部特性的研究与建模

Study and Modeling of the Localized Nature of Top of the Line Corrosion

碳钢和耐腐蚀合金在含硫化氢和二氧化碳环境中的局部腐蚀影响

Localized corrosion of carbon steel and corrosion-resistant alloys in environments containing hydrogen sulfide and carbon dioxide

铁硫化物在含H2S环境中低碳钢局部氢脆腐蚀中的作用

Role of Iron Sulfide in Localized Hydrogen Embrittlement Corrosion of Low Carbon Steel in H2S-Containing Environment

抑制下部沉积二氧化碳腐蚀的小颗粒硅砂和二十碳烷蜡沉积物

Small-grained silica sand and eicosane wax deposits to inhibit CO2 corrosion in lower deposits

高盐浓度对CO₂腐蚀和H₂S腐蚀的影响研究

Study on the Effect of High Salt Concentration on CO2 Corrosion and H2S Corrosion

腐蚀抑制剂管道应用资格测试要求

Qualification Testing Requirements for Corrosion Inhibitor Pipeline Applications

局部腐蚀在边际酸性环境中的轻质钢

Localized corrosion of lightweight steel in marginal acidic environments

黄铁矿在低碳钢局部腐蚀中的作用机理研究

A Mechanistic Study of the Role of Pyrite in Localized Corrosion of Mild Steel

未命名（根据内容推测为《局部腐蚀因素在微硫化物环境中的影响研究》）

Unnamed (according to the content, it is presumed to be "Research on the Influence of Local Corrosion Factors in Microsulfide Environment")

磁黄铁矿对 CO2 和 H2S 水溶液中低碳钢腐蚀的影响

Effect of Pyrrhotite on Mild Steel Corrosion in Aqueous CO2 and H2S Solutions

预测碳钢管道局部二氧化碳腐蚀

Predicting Localized CO2 Corrosion in Carbon Steel Pipelines

高流速二氧化碳环境中含抑制剂局部腐蚀的研究

Study on localized corrosion in high velocity carbon dioxide environment with inhibitor

二氧化碳水溶液中 H2S 导致低碳钢点蚀的临界水平研究

Investigation of the Threshold Level of H2S for Pitting of Mild Steel in CO2 Aqueous Solutions

拉锚索锚固系统腐蚀监测

Corrosion monitoring of cable anchor systems

CCS 系统中碳钢和含铬合金钢的腐蚀

Corrosion of carbon steel and Cr-containing alloy steels in CCS systems

基于电化学集成多电极阵列的腐蚀监测探针在可视化埋地管道腐蚀中的应用

Application of corrosion monitoring probe based on electrochemical integrated multi-electrode array in visualizing buried pipeline corrosion

新型协同添加剂组合可防止化学注入过程中毛细管和脐带管材料发生局部腐蚀

New Synergistic Combination of Additives for the Prevention of Localized Corrosion of Capillary and Umbilical Materials during Chemical Injection

应用DOE研究环境参数对局部腐蚀的影响

Application of DOE to Study the Effect of Environmental Parameters on Localized Corrosion

监测局部和一般腐蚀的膜基电化学传感器

Membrane-based electrochemical sensors for monitoring localized and general corrosion

页岩油田管件失效研究

Failure Studies of Pipe Fittings Retrieved from a Shale Production Field

奥氏体不锈钢表面加工对点蚀启动的影响研究

Study on the influence of surface processing of austenitic stainless steel on the initiation of pitting corrosion

监测和理解埋地钢管局部腐蚀的最新进展

Recent Advances in Monitoring and Understanding Localized Corrosion of Buried Steel Pipelines

压水堆核电厂一回路冷却剂加锌指南

Guidelines for zinc addition to primary coolant in pressurized water reactor nuclear power plants

金属和合金的腐蚀 电化学试验方法 恒电位极化和电位扫描极化测量操作指南（ISO 17475:2005/Cor 1:2006）

Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005/Cor 1:2006)

金属和合金的腐蚀 电化学试验方法 恒电位和动电位极化测量指南（ISO 17475:2005 IDT）

Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarisation measurements (ISO 17475:2005,IDT)

金属和合金的腐蚀 增材制造金属和合金的腐蚀及环境辅助裂纹试验指南（ISO 23669:2022 等同采用）

Corrosion of metals and alloys - Guidelines for corrosion and environmentally assisted cracking testing of additively manufactured metals and alloys (ISO 23669:2022, IDT)