均匀腐蚀是一种金属或材料表面整体发生速率基本相同的腐蚀现象,通常表现为均匀的减薄或形成保护层。对于铜,均匀腐蚀通常产生棕色或黑色氧化铜层或绿色碱式碳酸铜层;对于锌镀层,则可能形成保护性覆盖层,但在高腐蚀速率下会导致锌层完全消耗。
| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| BS ISO 18069:2015 试验标准 |
金属与合金的腐蚀. 液体中不锈钢和镍基合金均匀腐蚀速率的测定方法 Corrosion of metals and alloys. Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquids
|
2015-06-30 英国标准学会 |
| DIN 50930-3:1993 试验 |
腐蚀的金属 在水中内部管路、容器和美利体育官网首页网址中的金属材料腐蚀评估 热镀锌铁材腐蚀可能性评价 Corroded metals Evaluation of metal material corrosion in internal pipes, containers and equipment in water Evaluation of the corrosion potential of hot-dip galvanized iron
局部腐蚀 |
1993 德国标准化学会 |
| DIN 50930-5:1993 规范 |
德国规范:金属腐蚀 管道、容器和美利体育官网首页网址内铜及铜合金在水腐蚀作用下的腐蚀可能性评估 German Standard: Metal Corrosion Assessment of the Corrosion Potential of Copper and Copper Alloys in Pipelines, Containers and Equipment Under Water Corrosion
点蚀 |
1993 德国标准化学会 |
| DIN EN 12502-5 E:2001-10 指南标准 |
金属材料防腐蚀保护 配水和蓄水系统中腐蚀可能性的评价指南 第5部分:铸铁、非合金和低合金钢的影响因素(草案) Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 5: Influencing factors for cast iron, unalloyed and low alloyed steels
点蚀 |
2001-10 德国标准化学会 |
| JB/T 7901-2023 试验 |
Metal materials laboratory uniform corrosion total immersion test method
|
2023-12-29 行业标准-机械 |
| NACE Paper 05577-2015 指南标准 |
Methods for assessing the corrosivity of wastewater
|
2015 美国防腐工程师协会 |
| NACE Paper 09572-2009 规范 |
AN OPEN SOURCE MECHANISTIC MODEL FOR CO2 / H2S CORROSION OF CARBON STEEL
|
2009-01-01 美国防腐工程师协会 |
| NACE Paper 13330-2019 试验 |
Effects of acid concentration and temperature on active corrosion rates of stainless steel and nickel-based materials
钝化 |
2019 美国防腐工程师协会 |
| SS-EN 12502-1:2005 指南标准 |
金属材料的防腐保护 水分布和储存系统中腐蚀可能性评估指南 第一部分:通用内容 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 1: General
水系统 点蚀 |
2005 瑞典标准研究所 |
| SS-EN 12502-3:2005 指南标准 |
金属材料的防腐保护 水分布和存储系统中腐蚀可能性评估指南 第3部分:热浸镀锌铁质材料的影响因素 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 3: Influencing factors for hot dip galvanised ferrous materials
热浸镀锌 腐蚀产物层 |
2005 瑞典标准研究所 |
| T/CSTM 00046.2-2018 试验 |
Corrosion test of low alloy structure steels -- Part 2: Corrosion tests in simulated atmosphere
低合金结构钢 腐蚀试验 |
2018-10-16 中国团体标准 |
| T/CSTM 00046.8-2018 试验 |
Corrosion test of low alloy structure steels -- Part 8: Test method of general corrosion in solution
低合金结构钢 |
2018-10-16 中国团体标准 |
| UNE-EN 12502-1:2005 指南标准 |
金属材料的防腐蚀保护 水分配和储存系统腐蚀可能性评估指南 第1部分:总则 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 1: General
水系统 点蚀 |
2005-11-16 西班牙标准化协会 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号
页面更新时间: 2026-09-08 04:22