美利体育登录入口官网

升温下高强度的一般用熔模、炭和低合金及钴合金铸件用标准规范

Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures

承压件用钢质精铸件通用要求的标准规范

Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts

钢制熔模铸件的标准规范对含压部件的一般要求

Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts

铝合金熔模铸造的标准规范

Standard Specification for Aluminum-Alloy Investment Castings

铝合金熔模铸件的标准规格

Standard Specification for Aluminum-Alloy Investment Castings

金属熔模铸造规范 - 第2部分：耐腐蚀和耐热钢、镍基和钴基合金

Specification for Investment castings in metal — Part 2 : Corrosion and heat resisting steels, nickel and cobalt base alloys

航空航天系列.FE-CM3801(X5CrNiCuNb16-4)型钢.均匀溶解处理和沉淀淬火.熔模铸造.De≤50mm.Rm≥1030MPa

Aerospace series - Steel FE-CM3801 (X5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened - Investment casting - De ≤ 50 mm - Rm ≥ 1 030 MPa

航空航天系列.FE-CM3801(GX5CrNiCuNb16-4)型钢.均匀分布的、溶解处理和沉淀淬火的熔模铸件.De≤50mm.Rm≥900MPa

Aerospace series - Steel FE-CM3801 (GX5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened, investment casting De 50 mm, Rm 900 MPa

航空航天系列 钢GX5CrNiCuNb16-4 (1.4525) 均质化、固溶处理并沉淀硬化 精密铸造 直径≤50毫米 抗拉强度≥900兆帕

Aerospace series. Steel GX5CrNiCuNb16-4 (1.4525). Homogenized, solution treated and precipitation hardened. Investment casting. De ≤ 50 mm. Rm ≥ 900 MPa

熔模铸件(钢、镍合金和钴合金).一般技术要求

Investment castings (steel, nickel alloys and cobalt alloys). General technical requirements

投资铸件（钢、镍合金和钴合金） 一般技术要求

Investment castings (steel, nickel alloys and cobalt alloys)?— General technical requirements

非物质文化遗产 铜器失蜡法铸造技艺

Intangible Cultural Heritage: Lost Wax Casting Technique for Bronze Ware

铸造.失蜡铸造工艺用生产失型的美利体育官网首页网址

Founding - Equipment for the production of lost patterns for the lost wax casting process; German version EN 12883:2000

铸造.液体渗透检验.第2部分:精密铸件;德文版本EN 1371-2-2015

Founding - Liquid penetrant testing - Part 2: Investment castings; German version EN 1371-2:2015

钛合金TI-C64001 热等静压铸造

Aerospace series - Titanium alloy TI-C64001 - Investment casting, hot isostatic pressed

航空航天系列.FE-CM3801(X5CrNiCuNb16-4)型钢.均匀分布、溶解处理和沉淀淬火.熔模铸造.D<(指数)e>≤50mm.R<(指数)m>≥1030MPa

Aerospace series - Steel FE-CM3801 (X5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened - Investment casting - D<(Index)e> 50 mm - R<(Index)m> 1030 MPa; German and English version EN 3973:2006

航空航天系列 - 钢 FE-CM3801（X5CrNiCuNb16-4） - 均匀化、固溶处理和沉淀硬化 - 精密铸造件 - 直径≤50毫米 - 抗拉强度≥1,030 MPa

Aerospace series – Steel FE-CM3801 (X5CrNiCuNb16-4) – Homogenized, solution treated and precipitation hardened – Investment casting – De ≤ 50 mm – Rm ≥ 1 030 MPa

航空航天系列.FE-CM3801 (GX5CrNiCuNb16-4)型钢.分布均一的、溶液处理的和沉淀硬化的熔模铸件.D<指数e>≤50 mm.R<指数m>≤900 MPa

Aerospace series - Steel FE-CM3801 (GX5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened, investment casting D<(Index)e> 50 mm, R<(Index)m> 900 MPa; German and English version EN 4216:2007

航空航天系列 - FE-CM3801钢（GX5CrNiCuNb16-4） - 扩散退火、固溶处理和沉淀硬化精密铸件，直径≤50mm，抗拉强度≥900MPa

Aerospace series – Steel FE-CM3801 (GX5CrNiCuNb16-4) – Homogenized, solution treated and precipitation hardened, investment casting De ≤ 50 mm, Rm ≥ 900 MPa

熔模铸造用铝矾土砂、粉

Bauxite sand and flour for investment casting

熔模铸造工艺 污染物的控制

Investment casting process.Pollutants control

熔模铸造工艺 污染物的控制

Control of Contaminants in Investment Casting Process

熔模铸造工艺 通用技术导则

Investment Casting Process General Technical Guidelines

铸造机械 熔：拖Ｖ烀览逵偻滓惩 安全技术规范

Safety Technical Specifications for Investment and Lost Foam Casting Equipment of Casting Machinery

熔模锻造工艺质量控制

Quality control for investment casting process.

熔模铸造工艺质量控制

Investment casting process quality control

带直径>90mm圆柱形下模的熔模用压模支承板.结构及尺寸

Support plate for wax-pattern dies with min 190 mm dia cylinder matrices. Design and dimensions

带直径<190mm圆柱形下模的熔模用压模支承板.结构及尺寸

Movable retainer rings for wax-pattern dies with max 190 mm dia cylinder matrices. Design and dimensions

带直径>190mm圆柱形下模的熔模用压模支承板.结构及尺寸

Movable retainer rings for wax-pattern dies with min 190 mm dia cylinder matrices. Design and dimensions

带直径<190mm圆柱形下模的熔模用压模固定套.结构及尺寸

Stationary retainer rings for wax-pattern dies with max 190 mm dia cylinder matrices. Design and dimensions

带直径>190mm圆柱形下模的熔模用压模固定套.结构及尺寸

Stationary retainer rings for wax-pattern dies with min 190 mm dia cylinder matrices. Design and dimensions

带直径>190mm圆柱形下模的熔模用压模间隔板坯料.结构及尺寸

Ejector plate-blanks for wax-pattern dies with rectangular matrices. Design and dimensions

带矩形下模的熔模用压模间隔板坯料.结构及尺寸

Intermediate plate-blanks for wax-pattern dies with rectangular matrices. Design and dimensions

带直径<190mm圆柱形下模的熔模用压模顶出器板坯料.结构及尺寸

Ejector plate-blanks for wax-pattern dies witn max 190 mm dia cylinder matrices. Design and dimensions

带直径>190mm圆柱形下模的熔模用压模顶出器板坯料.结构及尺寸

Ejector plate-blanks for wax-pattern dies with min 190 mm dia cylinder matrices. Design and dimensions

带直径<190mm圆柱形下模的熔模用压模夹紧板坯料.结构及尺寸

Pressure plate (blanks) for wax-pattern dies with max 190 mm dia cylinder matrices. Design and dimensions

熔模用压模的中心衬套.结构及尺寸

Center buch for wax-pattern dies. Design and dimensions

熔模用压模斜销.结构及尺寸

Inclined pins for wax-pattern dies. Design and dimensions

不锈、耐热钢熔模铸造压气机静子叶片

Stainless, heat-resistant steel investment casting compressor stator blades

熔模铸件(钢、镍合金和钴合金).一般技术要求

Investment castings (steel, nickel alloys and cobalt alloys) - General technical requirements

投资铸件（钢、镍合金和钴合金） 一般技术要求

Investment castings (steel, nickel alloys and cobalt alloys) — General technical requirements

铸工 液态渗透控制 第二部分：按熔模铸造

Founding - Liquid penetrant testing - Part 2: Investment castings

航空系列 钢 FE-CM3801 (GX5CrNiCuNb16-4) 均匀化、固溶处理及沉淀硬化 投资铸造 De ≤ 50 mm Rm ≥ 900 MPa

Aerospace series - Steel FE-CM3801 (GX5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened, investment casting De ≤ 50 mm, Rm ≥ 900 MPa

熔模铸造,溶解和沉积热处理4.6Cu-3.4Ti-1.4B-0.75Ag-0.27Mg (A205.0/TiB2/3p-T7P)铸造铝合金复合材料

Cast Aluminum Alloy Composite 4.6Cu - 3.4Ti - 1.4B - 0.75Ag - 0.27Mg (205.0/TiB2/3p-T7P) Investment Cast, Solution and Precipitation Heat Treated

铜镍锡合金铸件 Cu 15Ni 8Sn 热等静压 固溶退火和稳态热处理（UNS C96900）

Copper-Nickel-Tin Alloy Castings Cu – 15Ni – 8Sn Hot Isostatically Pressed@ Solution Annealed and Spinodal Heat Treated (UNS C96900)

钢 耐腐蚀 熔模铸件 14Cr 4.25Ni 2.25Mo 0.25Cb 3.25Cu 均匀化和固溶热处理（UNS J92240）

Steel@ Corrosion Resistant@ Investment Castings 14Cr - 4.25Ni - 2.25Mo - 0.25Cb - 3.25Cu Homogenization and Solution Heat Treated (UNS J92240)

合金铸件 投资 耐腐蚀和耐热 65.5Co 25Cr 1.8Ni 5.0W as Cast（UNS R30023）

Alloy Castings@ Investment@ Corrosion and Heat Resistant 65.5Co - 25Cr - 1.8Ni - 5.0W as Cast (UNS R30023)

钴合金 耐腐蚀和耐热 失蜡铸造 成分：62Co 27Cr 2.8Ni 5.5Mo（Stellite? 21）铸态

Cobalt Alloy, Corrosion- and Heat-Resistant, Investment Castings 62Co - 27Cr - 2.8Ni - 5.5Mo (Stellite? 21) As-Cast

合金铸件 Investment Corrosion and Heat Resistant 63Ni 8.0Cr 10Co 6.0Mo 1.0Ti 4.2Ta 6.0Al 0.015B 0.03Zr 1.2Hf 真空熔炼 Vacuum Cast as Cast

Alloy Castings@ Investment@ Corrosion and Heat Resistant 63Ni - 8.0Cr - 10Co - 6.0Mo - 1.0Ti - 4.2Ta - 6.0Al - 0.015B - 0.03Zr - 1.2Hf Vacuum Melted@ Vacuum Cast as Cast

合金铸造 Investment 耐腐蚀和耐热 61Ni 16Cr 8.5Co 1.8Mo 2.6W 0.8Cb 3.4Ti 1.8Ta 3.4Al 0.010B 0.06Zr（0.03 0.08C）真空熔炼 真空铸造作为演员

Alloy Casting@ Investment@ Corrosion and Heat Resistant 61Ni- 16Cr - 8.5Co - 1.8Mo - 2.6W - 0.8Cb - 3.4Ti - 1.8Ta - 3.4Al - 0.010B - 0.06Zr (0.03 - 0.08C) Vacuum Melted@ Vacuum Cast as Cast

镍合金 耐腐蚀和耐热 板材、带材和板材 成分：65Ni 15.8Cr 15.2Mo 0.30Al 0.05La（HASTELLOY? S） 可消耗电极重熔 固溶热处理

Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate, 65Ni - 15.8Cr - 15.2Mo - 0.30Al - 0.05La (HASTELLOY? S), Consumable Electrode Remelted, Solution Heat Treated

founding 失蜡铸造工艺中的失模装备

Founding - Equipment for the production of lost patterns for the lost wax casting process

航空系列 钢FE-CM3801 (X5CrNiCuNb16-4) 等温处理、固溶处理和沉淀强化 投资铸造 De ≤ 50 mm Rm ≥ 1 030 MPa

Aerospace series - Steel FE-CM3801 (X5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened - Investment casting - De ≤ 50 mm - Rm ≥ 1 030 MPa

航空系列 钢FE-CM3801（GX5CrNiCuNb16-4） 等温处理、固溶处理和沉淀强化 投资铸造 De ≤ 50 mm, Rm ≥ 900 MPa

Aerospace series - Steel FE-CM3801 (GX5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened, investment casting De ≤ 50 mm, Rm ≥ 900 MPa

熔模铸造用锆英石砂、粉

Zircon sand and flour for investment casting

中温模型蜡 第1部分：非填充型

Medium temperature pattern wax Part 1:None-filled type

泵用不锈钢叶轮精密铸件

Precision casting of stainless steel impeller used in pump