美利体育登录入口官网

气瓶 可再充装无缝钢制气瓶和管道的设计、建造和试验 第1部分：抗拉强度小于 1 100 MPa 的淬火回火钢制气瓶和管道

Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes, Part 1: Quenched and tempered steel cylinders and tubes with tensile strength less than 1 100 MPa

气瓶 可再充装无缝钢制气瓶和管道的设计、建造和试验 第2部分：抗拉强度大于或等于 1 100 MPa 的淬火回火钢制气瓶和管道

Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes, Part 2: Quenched and tempered steel cylinders and tubes with tensile strength greater than or equal to 1 100 MPa

铬硅合金钢丝的标准规格

Standard Specification for Steel Wire, Chromium-Silicon Alloy

铬硅合金钢丝的标准规范

Standard Specification for Steel Wire, Chromium-Silicon Alloy

高强度淬火和回火用合金钢压力容器板的标准规格

Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered

特殊应用用合金钢螺栓标准规范

Standard Specification for Alloy-Steel Bolting for Special Applications

压力容器用钢板标准规范 合金钢 淬火回火 铬钼钢及铬钼钒钢

Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium

压力容器用经回火和淬火的7, 8和9%镍合金钢板的标准规格

Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7, 8, and 9 % Nickel

高强度压力元件应用合金钢锻件标准规范

Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application

制作焊接层压容器用淬火加回火的碳锰硅压力容器钢板的标准规范

Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels

制作焊接层压容器用淬火加回火的碳锰硅压力容器钢板标准规格

Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels

焊接压力容器用淬火和回火碳锰硅钢压力容器板的标准规范

Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels

焊接压力容器用淬火和回火的碳锰硅钢压力容器板的标准规范

Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels

锻造和类似用途用碳钢板标准规格

Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications

锻造和类似应用用碳钢板材的标准规范

Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications

经热处理的最低拉伸强度为120 ksi (830 MPa) 和150 ksi (1040 MPa)且具有英制和公制尺寸的钢和合金钢制高强度结构螺栓的标准规格

Standard Specification for High Strength Structural Bolts, Steel and Alloy Steel, Heat Treated, 120 ksi (830 MPa) and 150 ksi (1040 MPa) Minimum Tensile Strength, Inch and Metric Dimensions

淬火、回火或沉淀硬化条件下的高屈服强度结构钢板材和宽平板——第1部分：一般交货条件

Plates and Wide Flats Made of High Yield Strength Structural Steels in the Quenched and Tempered or Precipitation Hardened Conditions - Part 1: General Delivery Conditions

规定高温性能的压力用热轧可焊钢棒

Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties

航空航天系列.FE-PL1505(15CrMoV6)型钢.空气熔炼.淬火和调质钢.厚板材.6mm≤a≤20mm.1080MPa≤Rm≤1280MPa

Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Plate - 6 mm $3Q a 20 mm - 1080 MPa Rm 1280 MPa

航空航天系列.FE-PL1507(40CrMoV12)型钢.自耗电极再冶炼.淬火并回火.机加工用棒.De≤50mm.1250MPa≤Rm≤1400MPa

Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Hardened and tempered - Bar for machining - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa

航空航天系列 钢X12CrNiMoV12-3（1.4938） 空气熔化和自耗电极重熔 硬化和回火 酒吧 De=150毫米 900兆帕=Rm=1100兆帕

Aerospace series. Steel X12CrNiMoV12-3 (1.4938). Air melted and consumable electrode remelted. Hardened and tempered. Bars. De = 150 mm. 900 MPa = Rm = 1 100 MPa

航空航天系列 - 钢15CrMoV6(1.7334) - 空气熔炼 - 淬火和回火 - 机加工用棒材 - 直径≤100mm - 1080MPa≤Rm≤1280MPa

Aerospace series – Steel 15CrMoV6 (1.7334) – Air melted – Hardened and tempered – Bar for machining – De ≤ 100 mm – 1080 MPa ≤ Rm ≤ 1280 MPa

航空航天系列 - FE-PL1505（15CrMoV6）钢 - 空气熔炼 - 淬火和回火 - 板材和带材 - 2mm≤a≤6mm - 1080MPa≤Rm≤1280MPa

Aerospace series – Steel FE-PL1505 (15CrMoV6) – Air melted – Hardened and tempered – Sheet and strip – 2 mm ≤ a ≤ 6 mm – 1 080 MPa ≤ Rm ≤ 1 280 MPa

航空航天系列 - 钢 15CrMoV6 (1.7334) - 空气熔炼 - 淬火和回火 - 板材和带材 - 2 mm a 6 mm - 1080 MPa R 1280 MPa

Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 2 mm a 6 mm - 1080 MPa R 1280 MPa; German and English version prEN 3524:2021

航空航天系列 - 15CrMoV6(1.7334)钢 - 空气熔炼 - 淬火和回火 - 板材 - 6mm≤a≤20mm - 1080MPa≤Rm≤1280MPa

Aerospace series – Steel 15CrMoV6 (1.7334) – Air melted – Hardened and tempered – Plates – 6 mm ≤ a ≤ 20 mm – 1 080 MPa ≤ Rm ≤ 1 280 MPa

航空航天系列 - FE-PL1505(15CrMoV6)钢 - 空气熔炼 - 淬火和回火 - 板材和带材 - 厚度0.5mm≤a≤6mm - 抗拉强度980MPa≤Rm≤1180MPa

Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 0,5 mm ≤ a ≤ 6 mm - 980 MPa ≤ Rm ≤ 1 180 MPa

航空航天系列 - 钢 15CrMoV6 (1.7334) - 空气熔炼 - 淬火和回火 - 板材和带材 - 0,5 mm a 6 mm - 980 MPa R 1180 MPa

Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheet and strip - 0,5 mm a 6 mm - 980 MPa R 1180 MPa; German and English version prEN 3526:2021

航空航天系列.FE-PL1507(40CrMoV12)钢.消耗电极再熔炼.硬化调质钢.机加工用棒材.D≤50mm.1250MPa≤R≤1400MPa

Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Hardened and tempered - Bar for machining - D ≤ 50 mm - 1250 MPa ≤ R ≤ 1400 MPa; German and English version EN 3972:2006

热处理钢、合金钢和易切削钢. 第2部分: 淬火和回火合金钢 (ISO 683-2-2016); 德文版本 EN ISO 683-2-2018

Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering (ISO 683-2:2016); German version EN ISO 683-2:2018

结构钢制热轧产品.第6部分:淬火和回火条件下高屈服强度结构钢板材和宽扁材的交货技术条件.包含修改件A1-2009

Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition (Incorporates Amendment A1: 2009)

高强度硼合金热轧钢板 用于调质处理

Hot-rolled high-strength boron alloy steel sheets for quenching and tempering.

钢铁的淬火和回火工艺

Process of quenching and tempering of iron and steel

钢铁的淬火和回火处理工艺(修改件1)

Process of quenching and tempering of iron and steel (Amendment 1)

指定高温特性的压力容器用热轧焊接钢棒

Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties

航空航天系列 耐热合金 FE-PM1708 真空电弧重熔 淬火回火 棒材 直径 a 或 D ≤ 200 mm 抗拉强度 Rm 1 000 MPa 至 1 140 MPa

Aerospace series - Heat resisting alloy FE-PM1708 - Vacuum arc remelted - Hardened and tempered - Bars - a or D ≤ 200 mm - 1 000 MPa ≤ Rm ≤ 1 140 MPa

航空航天系列 钢 X4CrNiMo16-5-1 (1.4418) 空气熔化及电渣重熔 (ESR) 调质 棒材 直径≤200 mm 1 150 MPa≤Rm≤1 300 MPa

Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa

航空航天系列 X4CrNiMo16-5-1钢（1.4418） 空气熔炼和电渣重熔（ESR） 淬火和回火 棒材 直径≤200 mm 900 MPa≤Rm≤1 050 MPa

Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa

热处理钢、合金钢和自动机床钢 第1部分：非合金淬火和回火钢 (ISO 683-1:2016)

Heat-treatable steels, alloy steels and free-cutting steels - Part 1: Non-alloy steels for quenching and tempering (ISO 683-1:2016)

热处理钢、合金钢和自动钢 第2部分：合金渗碳和回火钢（ISO 683-2:2016）

Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering (ISO 683-2:2016)

结构钢热轧产品 第6部分：调质高屈服强度结构钢扁平材的交货技术条件

Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

管道用易燃流体钢管 技术交货条件 第2部分：要求类别B钢管

Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B

具有特定高温性能的压力用途的热轧可焊钢筋

Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties

航空系列 钢30CrNiMo8 (1.6580) 空气熔炼 淬火回火 车削用棒材 直径=100 mm 屈服强度Rm=1 100 MPa = 抗拉强度Rm=1 300 MPa

Aerospace series - Steel 30CrNiMo8 (1.6580) - Air melted - Hardened and tempered - Bar for machining - De = 100 mm - 1 100 MPa = Rm = 1 300 MPa

航空航天系列 钢FE-PM 3504 (X4CrNiMo16-5-1) 空气熔炼 淬火和回火 板材 0.6 mm ≤ a ≤ 50 mm 900 MPa ≤ Rm ≤ 1 050 MPa

Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Sheet and plate - 0,6 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa

可热处理钢、合金钢和自由切削钢 第2部分：淬火回火用合金钢（ISO 683-2:2016）

Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering (ISO 683-2:2016)

钢材X4CrNiMo16-5-1 (1.4418) 空气熔炼 回火及淬火 锻件 直径≤200 mm 屈服强度1150 MPa至抗拉强度1300 MPa

Steel X4CrNiMo16-5-1 (1.4418) Air-melted tempered and quenched forgings ≤ 200 mm yield strength 1150 MPa to tensile strength 1300 MPa

航空航天系列 钢 X4CrNiMo16-5-1(1.4418)空气熔炼 淬火和回火 锻件 De <= 200mm 900 MPa <= Rm <= 1050 MPa

Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De <= 200 mm - 900 MPa <= Rm <= 1 050 MPa (Endorsed by AENOR in December of 2014.)