美利体育登录入口官网

淬硬钢和回火钢.通用交货技术条件

Steels for quenching and tempering - General technical delivery conditions

建筑用淬火和回火钢.技术交货条件

Steels for quenching and tempering for construction purposes - Technical delivery conditions

消防装置用联接器扳手 第1部分：BC型联接器扳手

Coupling spanner for fire fighting fittings - Part 1: Coupling spanner type BC

消防管件用连接扳手 第1部分：BC 型连接扳手

Coupling spanner for fire fighting fittings - Part 1: Coupling spanner type BC

消防装置用联接器扳手.第2部分:ABC型联接器扳手

Coupling spanner for fire fighting fittings - Part 2: Coupling spanner type ABC

消防管件用连接扳手 第2部分：ABC 型连接扳手

Coupling spanner for fire fighting fittings - Part 2: Coupling spanner type ABC

架空美利体育官网首页网址的接触导线用旋转螺栓.带螺纹的旋转螺栓

Revolving bolts for contact wire clamp for overhead equipment; revolving bolts with thread

工装和夹具用螺纹体支脚

Feet with threaded shank for jigs and fixtures

用于夹具和固定装置的带螺纹柄的支脚

Feet with threaded shank for jigs and fixtures

标记穿孔机

Marking punches

螺钉和螺母的装配工具 敲击扳手 盒子 技术规格

Assembly tools for screws and nuts - Slugging wrenches, box - Technical specifications

螺钉和螺母用装配工具.管钳子用螺丝钻.技术规范

Assembly tools for screws and nuts - Tommy bars for socket wrenches - Technical specifications

结构钢制热轧产品 第6部分：在淬火和回火条件下高屈服强度结构钢扁平轧材的交货技术条件（草案）

Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

结构钢热轧产品 第6部分：淬火和回火状态高屈服强度钢板材交货技术条件

Hot-rolled products made from structural steels – Part 6: Technical delivery conditions for flat products made from steels with a higher yield strength in the quenched and tempered state

结构钢制热轧产品.第6部分:在淬火和回火条件下高屈服强度结构钢扁平轧材的交货技术条件(包括修改件A1-2009).英文版本DIN EN 10025-6-2009-08

Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition (includes Amendment A1:2009) ; English version of DIN EN 10025-6:2009-08

承压钢扁平轧材.第6部分:淬火和回火的可焊接细粒钢.英文版本DIN EN 10028-6-2009-09

Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered; English version of DIN EN 10028-6:2009-09

压力用途钢制扁平产品 第6部分：可焊接细晶粒钢 淬火和回火

Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered; German version EN 10028-6:2017

淬火和回火钢.第1部分:一般交货技术条件

Steels for quenching and tempering - Part 1: General technical delivery conditions; English version of DIN EN 10083-1:2006-10

热处理用冷轧窄钢带材.交货技术条件.第3部分:淬火和回火

Cold-rolled narrow steel strip for heat-treatment - Technical delivery conditions - Part 3: Steels for quenching and tempering; German version EN 10132-3:2000

冷镦和冷挤压钢杆材、棒材和线材.第1部分:通用交货技术条件

Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions; German version EN 10263-1:2001

冷镦和冷挤压钢杆材、棒材和线材.第4部分:淬火和回火钢交货技术条件

Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering; German version EN 10263-4:2001

冷镦和冷挤压用钢棒、棒材和线材第4部分：淬火和回火钢交货技术条件

Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering

用于具有指定高温和/或低温性能的紧固件的钢和镍合金

Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties; German version EN 10269:2013

光亮钢产品.交货技术条件.第1部分:总则

Bright steel products - Technical delivery conditions - Part 1: General; English version of DIN EN 10277-1:2008-06

光亮钢产品.交货技术条件.第5部分:淬火和回火钢

Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering; English version of DIN EN 10277-5:2008-06

建筑用淬火和回火钢 交货技术条件

Steels for quenching and tempering for construction purposes - Technical delivery conditions; German version EN 10343:2009

金属材料 硬度值的换算（草案）

Conversion of hardness values of metal materials (draft)

热处理钢、合金钢和易切削钢 - 第 1 部分：淬火和回火用非合金钢 (ISO 683-1:2016)

Heat-treatable steels, alloy steels and free-cutting steels - Part 1: Non-alloy steels for quenching and tempering (ISO 683-1:2016); German version EN ISO 683-1:2018

热处理钢、合金钢和易切削钢 第4部分：易切削钢

Heat-treatable steels, alloy steels and free-cutting steels - Part 4: Free-cutting steels (ISO 683-4:2016); German version EN ISO 683-4:2018

气瓶.可重复充装的无缝钢气瓶.设计、结构和试验.第1部分:抗拉强度低于1100 MPa的淬火加回火钢瓶(ISO 9809-1-2010).德文版本EN ISO 9809-1-2010

Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1100 MPa (ISO 9809-1:2010); German version EN ISO 9809-1:2010

气瓶.可再充装无缝钢气瓶和管子的设计、制造和测试第1部分：拉伸强度小于1100 MPa的调质钢瓶和管子

Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 1: Quenched and tempered steel cylinders and tubes with tensile strength less than 1100 MPa (ISO 9809-1:2019); German version EN ISO 9809-1:2019

气瓶.可重复充装的无缝钢气瓶.设计、结构和试验.第2部分:抗拉强度大于或等于1100 MPa的淬火加回火钢瓶(ISO 9809-2-2010).德文版本EN ISO 9809-2-2010

Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1100 MPa (ISO 9809-2:2010); German version EN ISO 9809-2:2010

结构钢的热轧产品 - 第六部分：高强度冷作和调质状态下的结构钢板的技术交货条件

Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

压力用途的钢板制品.第6部分:可焊接淬火和回火细粒钢

Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels@ quenched and tempered

冷加工和冷挤压的钢棒,棍和线.第4部分:淬火和回火钢的一般交货技术条件.合并勘误表-2002年7月［代替:GME QS 103600,GME QS 103700］

Steel Rod, Bars and Wire for Cold Heading and Cold Extrusion - Part 4: Technical Delivery Conditions for Steels for Quenching and Tempering (Incorporating corrigendum July 2002)

用于建筑用途的淬火和回火钢 技术交货条件

Steels for quenching and tempering for construction purposes - Technical delivery conditions

高硬度4130钢P线焊接件全尺寸SSC测试

Full-size SSC test of high-hardness 4130 steel P-wire welded parts

淬火和回火用钢 第1部分：一般交货技术条件

Steels for quenching and tempering - Part 1: General technical delivery conditions

调质钢 第2部分:非合金优质钢的交货技术条件(包括修订版A1:1996)

Quenched and tempered steels - Part 2: Technical delivery conditions for unalloyed quality steels (includes amendment A1:1996)

光亮钢产品 交货技术条件 第5部分:淬火和回火用钢

Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering

精密工程技术 材料

Materials for precision engineering