美利体育登录入口官网

测试和评级 用于保护建筑围护结构的摆动门组件抗强风暴风力部件

Testing and rating of swing door assemblies used to protect building envelopes against severe storm wind forces

环境测试 第 2.75 部分：测试 测试 Eh：锤击测试 (IEC 60068-2-75:2014 (ED.2.0) MOD)

Environmental testing, Part 2.75: Tests — Test Eh: Hammer tests (IEC 60068-2-75:2014 (ED. 2.0) MOD)

焊接材料 高强度钢气体保护和非气体保护金属极电弧焊用管状药芯焊条 分类

Welding consumables — Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels — Classification

断裂塑料及电绝缘材料拉伸冲击能量的标准试验方法

Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials

塑料薄膜耐摆锤冲击的标准试验方法

Standard Test Method for Pendulum Impact Resistance of Plastic Film

屋面薄膜试样耐动态穿孔性能的标准试验方法

Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens

使用钢球确定新型低斜率屋顶膜的抗冲击性的标准试验方法（Z8295Z）

Standard Test Method for Determining Impact Resistance of New Low Slope Roof Membranes Using Steel Balls (Z8295Z)

公共安全人员使用的直接射击、单发无致命性冲击弹的冲击能量和精度评定的标准试验方法

Standard Test Method for Assessing Impact Energy and Precision of Direct-fire, Single-projectile Less Lethal Impact Rounds Used by Public Safety Officers

压力管道用聚乙烯薄样品的却贝冲击试验的标准试验方法

Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes

与食品接触的材料和器具.食品供给和工业用的非金属器具.抗冲击性测定的试验方法

Materials and articles in contact with foodstuffs - Non-metallic articles for catering and industrial use - Method of test for the determination of impact resistance

民用爆炸物.烈性炸药.测定炸药的冲击灵敏性

Explosives for civil uses - High explosives - Determination of sensitiveness to impact of explosives

焊接耗材 非合金钢和细晶粒钢气体保护金属电弧焊的焊丝和熔敷焊缝 分类

Welding consumables. Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification

金属材料 夏比摆锤冲击试验 测试机验证

Metallic materials. Charpy pendulum impact test. Verification of testing machines

半导体器件 微机电器件 硅基MEMS制造技术 纳米结构抗冲击性能的测量方法

Semiconductor devices. Micro-electromechanical devices - Silicon based MEMS fabrication technology. Measurement method of impact resistance of nanostructures

无缝钢管技术交货条件 第2部分：具有规定高温性能的非合金和合金钢管

Technical delivery conditions for seamless steel tubes Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties

武术用防护美利体育官网首页网址 第3部分：躯干护具的补充要求和试验方法（草案）

Protective equipment for martial arts - Part 3: Additional requirements and test methods for trunk protectors

武术防护用品第3部分：躯干护具的附加要求和试验方法

Protective equipment for martial arts - Part 3: Additional requirements and test methods for trunk protectors; German version EN 13277-3:2013

民用爆炸物.高级炸药.第4部分:爆炸物冲击灵敏度的测定; 德文版本 EN 13631-4:2002

Explosives for civil uses - High explosives - Part 4: Determination of sensitiveness to impact of explosives; German version EN 13631-4:2002

民用爆炸物烈性炸药第4部分：爆炸物冲击敏感性的测定

Explosives for civil uses - High explosives - Part 4: Determination of sensitiveness to impact of explosives; German version EN 13631-4:2002 / Note: To be replaced by DIN EN 13631-4 (2021-05).

摩托车手防机械冲击防护服第2部分：摩托车手背部保护器要求和测试方法

Motorcyclists' protective clothing against mechanical impact - Part 2: Motorcyclists' back protectors - Requirements and test methods; German version EN 1621-2:2014

工业安全头盔

Industrial safety helmets; German version EN 397:2012+A1:2012 / Note: To be replaced by DIN EN 397 (2022-10).

门扇 抗硬体冲击能力的测定

Door leaves - Determination of the resistance to hard body impact; German version EN 950:1999

粘合剂 楔形冲击条件下高强度粘合剂粘合的动态抗裂性的测定 楔形冲击法（ISO 11343:2019）

Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions - Wedge impact method (ISO 11343:2019)

塑料.摆锤冲击试验机鉴定.却贝、艾卓德和拉伸冲击试验

Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:1999, including Corrigendum 1:2000); English version of DIN EN ISO 13802:2006-06

塑料夏比冲击性能的测定

Plastics Determination of Charpy impact properties

焊接消耗品.高强度钢的气体保护和非气体保护金属极电弧焊用药芯电极.分类

Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2005); English version of DIN EN ISO 18276:2006-09

焊接耗材 - 高强度钢气体保护和非气体保护金属电弧焊用管状药芯焊条 - 分类（ISO/DIS 18276:2023）

Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO/DIS 18276:2023); German and English version prEN ISO 18276:2023 / Note: Date of issue 2023-05-26*Intend...

足部和腿部保护器 鞋类部件的要求和测试方法 第 2 部分：非金属鞋头

Foot and leg protectors - Requirements and test methods for footwear component - Part 2: Non-metallic toecaps

塑料制品.硬质塑料制品击穿性能的测定.第2部分:仪器冲孔试验 (ISO 6603-2:2000); 德文版本 EN ISO 6603-2:2000

Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000); German version EN ISO 6603-2:2000

焊接消耗品.非合金和细晶粒钢的气体保护和非气体保护用的管状芯电极.分类(ISO 17632:2015)

Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nonalloy and fine grain steels - Classification

塑料简支梁、悬臂梁和拉伸冲击试验用摆锤冲击试验机的检验

Verification of pendulum impact-testing machines used for charpy,lzod and tensile impact-testing of plastics

林业机械 汽油动力绿篱机和割灌机 切割装置防护装置强度测试方法

Machinery for forestry Petrol-powered hedge trimmers and brush cutters Methods for testing the protective device of a cutting device for strength

采矿美利体育官网首页网址. 气动锤. 安全要求和试验方法

Mining equipment. Pneumatic hammers. Safety requirements and test methods

电工电子产品环境试验.第2-75部分:试验方法.试验Eh:锤击试验

Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests

环境试验 第2-75部分：试验 试验Eh：锤击试验

Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests

环境试验 第2-75部分：试验 试验Eh：锤击试验 综合版

Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests CONSOLIDATED VERSION

外科植入物. 测定髋关节假体用陶瓷股骨头的抗冲击性

Implants for surgery - Determination of impact resistance of ceramic femoral heads for hip joint prostheses

塑料 摆锤冲击试验机的鉴定 却贝、艾卓德和拉伸冲击试验

Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing

焊接消耗品.非合金钢及细粒钢气体保护的和非气体保护金属弧焊用药芯电极.分类

Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification

焊接耗材 高强度钢气体保护和非气体保护金属电弧焊用管状药芯焊条 分类

Welding consumables — Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels — Classification

门扇.硬物撞击抗性测定

Door leaves - Determination of the resistance to hard body impact

压力用途的钢锻件和轧制或锻造的棒材 交货技术条件 第3部分:具有规定的低温度特性的镍钢

Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 3: Nickel steels with specified low temperature properties

压力用途的钢锻件和轧制或锻造的棒材 交货技术条件 第4部分:高强度可焊接细粒钢

Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 4: Weldable fine grain steels with high proof strength

支腿式电动凿岩机

Leg-support electric rock drills

向上式凿岩机

Stopers

摆锤式冲击试验.试验机械的检定

Charpy pendulum impact test -- Verification of testing machines

非金属材料用摆锤式冲击试验机.试验机的检验

Pendulum-type impact-testing machines for Non-Metallic Materials -- Verification of testing machines

弹簧冲击器校准规范

Calibration Specification for Spring Hammers

与食品接触的材料和物品 餐饮和工业用非金属物品 抗冲击性的测定方法

Materials and articles in contact with foodstuffs - Non-metallic articles for catering and industrial use - Method of test for the determination of impact resistance

民用爆炸物 高爆炸药 第4部分:爆炸物冲击敏感度的测定

Explosives for civil uses - High explosives - Part 4: Determination of sensitiveness to impact of explosives

门扇 抗硬体冲击的测定

Door leaves - Determination of the resistance to hard body impact

与食品接触的材料和制品 餐饮和工业用非金属制品 测定抗冲击性的试验方法

Materials and articles in contact with foodstuffs - Non-metallic articles for catering and industrial use - Method of test for the determination of impact resistance (Endorsed by AENOR in August of 2000.)

民用炸药 烈性炸药 第4部分：爆炸物冲击敏感度的测定

Explosives for civil uses - High explosives - Part 4: Determination of sensitiveness to impact of explosives

环境试验 第2-75部分：试验 试验Eh：锤击试验（IEC 60068-2-75:2014）

Umgebungseinfluesse - Teil 2-75: Pruefungen - Pruefung Eh: Hammerpruefungen (IEC 60068-2-75:2014); Deutsche Fassung EN 60068-2-75:2014

灯具 第2-3部分：特殊要求——道路和街道照明用灯具

Luminaires – Part 2-3: Particular requirements – Luminaires for road and street lighting