美利体育登录入口官网

金属表面精整.表面的制备和预处理.油、油脂及相关杂质的清除

Metal finishing - Preparation and pretreatment of surfaces - Removal of oil, grease and related contaimination

涂层试验用热轧碳钢薄板准备 (喷砂清理) 的标准实践规程

Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings

一次性使用植入物残留物和一次性无菌器械报告和评估的标准实施规程

Standard Practice for Reporting and Assessment of Residues on Single-Use Implants and Single-Use Sterile Instruments

洁净室和相关控制环境.通过化学浓缩进行表面清洁度分类

Cleanrooms and associated controlled environments. Classification of surface cleanliness by chemical concentration

洁净室和受控环境 为实现颗：突镏逝ǘ榷ㄒ宓慕嗑欢人降谋砻媲褰

Cleanrooms and associated controlled environments - Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical concentration

在涂覆油漆和相关产品之前准备钢基材 评估表面清洁度的测试 实验室测定清洁表面上的氯化物

Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Laboratory determination of chloride on cleaned surfaces

在涂覆油漆和相关产品之前准备钢基材 评估表面清洁度的测试 油漆施工前凝结概率估计指南

Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Guidance on the estimation of the probability of condensation prior to paint application

空间系统 流体系统的表面清洁度 粗清洗工艺

Space systems. Surface cleanliness of fluid systems - Rough-cleaning processes

航天产品保证 飞行硬件超洁净

Space product assurance - Ultracleaning of flight hardware; English version EN 16602-70-54:2019

洁净室和相关受控环境 第13部分：清洁表面以达到颗：突Х掷喙娑ǖ那褰喽人剑↖SO 14644-13:2017）

Cleanrooms and associated controlled environments - Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications (ISO 14644-13:2017)

洁净室和相关受控环境 第13部分：表面清洁 以达到颗：突Х掷喾矫婀娑ǖ那褰喽人

Cleanrooms and associated controlled environments - Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications (ISO 14644-13:2017); German version EN ISO 14644-13:2017

涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第12部分：水溶性铁离子的现场滴定测定方法（草案）

Tests for assessment of cleanliness of steel pre-treatment surfaces before application of paints and related products Part 12: On-site titration determination method for water-soluble iron ions (draft)

涂装油漆和有关产品前钢材预处理.表面清洁度的评定试验.第12部分:水溶性铁离子的现场滴定测定方法

Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions (ISO 8502-12:2003); German version

使用油漆涂料和相关产品之前钢基材的清理处理.表面清洁度的评定试验.第2部分:已清洁的表面上氯化物的实验室测定(ISO 8502-2:2005)

Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2005); English version of DIN EN ISO 8502-2:

涂装油漆和相关产品前钢基材的制备 表面清洁度评估测试 第2部分：清洁表面上氯化物的实验室测定

Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2017); German version EN ISO 8502-2:2017

涂装油漆和相关产品前钢基材的准备 表面清洁度评估试验 第4部分：油漆涂装前凝结概率估计指南

Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:2017); Ge...

涂装油漆和相关产品前钢基材的准备 表面准备方法 第3部分：手动和电动工具清洁

Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO 8504-3:2018); German version EN ISO 8504-3:2018

钢结构防腐涂层前表面污染测试

Corrosion protection of steel structures by protective paint systems - Testing of surfaces before application of coating materials for containments that cannot be detected visually

采用保护漆系统对钢结构作腐蚀保护.不能目视美利体育登录入口官网污染物涂层材料表面的用前试验

Corrosion protection of steel structures by protective paint systems - Testing of surfaces before application of coating materials for containments that cannot be detected visually

钢结构涂层腐蚀保护 表面美利体育登录入口官网无法视觉识别的污染物测试

Steel structure coating corrosion protection surface inspection contaminant testing that cannot be visually identified

通过防护涂料系统对钢结构进行腐蚀防护 在涂覆涂料材料之前对无法目视美利体育登录入口官网的容器进行表面测试

Corrosion protection of steel structures by protective paint systems - Testing of surfaces before application of coating materials for containments that cannot be detected visually / Note: Date of issue 2023-01-13*Intended as replacement for DIN/TR 556...

耐指纹涂料

Anti-fingerprint coating

洁净室和相关控制环境.第10部分:通过化学浓缩进行表面清洁度分类

Cleanrooms and associated controlled environments - Part 10: Classification of surface cleanliness by chemical concentration

航天系统.流体系统的表面清洁度.第4部分:初步清洁过程

Space systems - Surface cleanliness of fluid systems - Part 4: Rough-cleaning processes

空气分离美利体育官网首页网址表面清洁度

Surface cleanliness of air separation plants

油漆及相关产品涂覆前钢材表面预处理 表面清洁度评估试验 第15部分：酸提取法提取可溶性污染物进行分析（ISO 8502-15:2020）

Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 15: Extraction of soluble contaminants for analysis by acid extraction (ISO 8502-15:2020)

涂漆前钢基材的准备 评估表面清洁度的试验 第2部分：清洁表面上氯化物的实验室测定 (ISO 8502-2:2017)

Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2017)

测定表面清洁度的仪器方法

Instrumental Methods of Determining Surface Cleanliness

污染控制 表面清洁度规范

Contamination control - Surface cleanliness code

污染控制技术 系统表面清洁度

Contamination control technologies - Surface cleanliness in systems

洁净室及相关受控环境 第13部分：以颗：突Х掷啻锏焦娑ㄇ褰喽人降谋砻媲褰啵↖SO 14644-13:2017）

Cleanrooms and associated controlled environments - Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications (ISO 14644-13:2017)

涂料和相关产品施工前钢基材的预处理 表面清洁度的目视评定 第4部分：与水射流相关的初始表面条件、预处理等级和闪锈等级

Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with water jetting (ISO 8501-4:2020)

在涂装及相关产品应用前钢材底材的准备 表面清洁度评估试验 第15部分：酸提取法提取可溶性污染物以供分析（ISO 8502-15:2020 等同）

Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 15: Extraction of soluble contaminants for analysis by acid extraction (ISO 8502-15:2020, IDT)

涂装油漆和相关产品前钢材基材的预处理 表面清洁度的评定试验 第2部分：清洁表面氯化物的实验室测定

Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2005)

在涂装和相关产品应用前钢材底材的准备 表面清洁度评估的试验方法 第2部分：清洁表面氯化物的实验室测定（ISO 8502-2:2017）

Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2017)

在应用涂料和相关产品前钢材底材的准备 表面清洁度评估试验 第6部分：水溶性污染物提取分析（布氏勒法）(ISO 8502-6:2020)

Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of water soluble contaminants for analysis (Bresle method)(ISO 8502-6:2020)

涂装油漆和相关产品前钢材基材的预处理 表面预处理方法 第1部分：一般原则（ISO 8504-1:2000）

Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2000)

洁净室和相关受控环境 第10部分：按化学浓度分类表面清洁度（ISO 14644-10:2013）

Cleanrooms and associated controlled environments - Part 10: Classification of surface cleanliness by chemical concentration (ISO 14644-10:2013)

洁净室和相关受控环境 第9部分：按颗粒浓度分类表面清洁度（ISO 14644-9:2012）

Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012)

洁净室技术 与要求的清洁度和表面清洁度的兼容性

Clean room technology - Compatibility with required cleanliness and surface cleanliness

通风与空调系统卫生标准 卫生检查和卫生检查中的测量程序和检查

Hygienic standards for ventilation and air-conditioning systems - Measurement procedures and examinations in hygiene check-ups and hygiene inspections

铜及铜合金板带箔材表面清洁度检验方法

Test method for surface cleanliness of copper and copper alloy plates, strips and foils